1994

Forward control shifter rod kit.The shifter rod measures 11-3/4", with a maximum adjustmet of 14-1/2" center to center and minimum adjustment of 13-1/2" cetner to center. Fits:FXD 1991-2005Additional...

Chrome billet shifter lever. Fits:FXDWG 1991-2017FXST 1990-2017Additional Information OEM No.34616-02

Chrome billet left side shifter spacer has 3 holes and is a 1/2" thick. Fits:FXST 1984-1999Additional Information UOM1 - EA

Jocky shift assembly includes bracket to mount to the top motor mount where coil would mount and features a billet construction.Check hole spacing of two holes (1" center to center spacing). Thread...

V-Twin - 21-0117 - Jockey Cable End BushingDescriptionJockey cable end bushing. Fits:FLSTS 2000-UPFLST 1986-UPFXST 1986-UPFXSTS 2000-UPAdditional Information

V-Twin - 21-0107 - Shifter Collar Long with WasherDescriptionLong shifter collar with washer is used to eliminate the heel shifter or for use on single shifter models. Fits:FLT 1979-UPAdditional...

V-Twin - 21-0106 - Shifter Seal CollarDescriptionShifter seal collar for use with heel/toe shifters. Fits:FLT 1979-UPAdditional Information

Chrome shifter mount bracket features footpeg boss as an integral part of the shift plate. Fits:FXST 1990-1999Additional Information OEM No.33683-90A

Jockey shifter 5 piece kit features a chrome finish and is for 1941-1984 Big Twin frames.Kit includes shaft, arm, lever, bracket and peg hardware. *NOTE: Order related linkage or cables, as required...

Jockey shifter 5 piece kit features a black finish and is for 1941-1984 Big Twin frames.Kit includes shaft, arm, lever, bracket and peg hardware. *NOTE: Order related linkage...

Stainless steel foot shifter lever for shifter control assembly. Fits:FLST 1986-1999FX 1971-1984FL 1952-1985FXST 1986-1999Additional Information

Stainless steel foot shifter plate for shifter control assembly. Fits:FLST 1986-1999FX 1971-1984FL 1952-1985FXST 1986-1999Additional Information

V-Twin - 21-0072 - Slotted Shifter LeverDescriptionSlotted shifter lever is made of forged steel and features a chrome finish.Use for front or rear shifter. Fits:FLT 1983-UPFLST 1986-UPAdditional...

V-Twin - 21-0055 - Black Heel Toe Shifter Lever SetDescriptionBlack heel toe shifter lever set. Fits:FLT 1986-UPAdditional Information

V-Twin - 21-0050 - Chrome Heel Toe Shifter Lever SetDescriptionChrome heel toe shifter lever set.*NOTE: Does not include pinch bolts, must order separately.

V-Twin - 21-0035 - Extended Heel Toe Shifter Lever Set BlackDescriptionBlack heel toe shifter lever set measures 1.0" longer than standard levers, separating the distance between the heel/toe shift...

V-Twin - 21-0002 - Extended Heel Toe Shifter Lever Set ChromeDescriptionExtended heel toe shifter lever set measures 1.0" longer than standard levers, separating the distance between the heel/toe...

V-Twin - 2054-10T - Rear Pulley Bolt and Washer Kit Allen StyleDescriptionPolished rear pulley bolt and washer kit is allen type with a 7/16-14 x 1-3/4" thread size. Fits:FLST 1997-1999 spoke...

Precision made steel 29 tooth belt drive replacement transmission pulley. Fits:FXD 1991-2005FLT 1994-2006FXST 1994-2006FLST 1994-2006FXR 1994-1994Additional Information

Black rear drive pulley is 1-1/8" wide, 61 tooth. Fits:XL 1991-1999 5-speedAdditional Information OEM No.40213-91

Hex flange sprocket nut features a 2-1/2" outer diameter with a black finish.*NOTE: Fits sprockets with "3" set screw holes. Installation may only allow 2 out of the 3 holes in the sprocket to be...

1-1/2" sprocket pulley spacer is machined with counterbore for positive alignment and features an alloy consturction.This is the 5 hole type to space rear sprocket or pulley for alignment. Fits:XL...

XL wide tire chain drive kit includes 23 tooth drive sprocket and 48 rear tooth sprocket with a 120 link, 530 chain. Kit includes "gold seal" chain. Fits:XL 1991-1999Additional Information <

Transmission sprocket conversion kit is used to convert belt drive models to chain drive. Kit includes "gold seal" chain.Kit features a 108 link chain (67.5") and 2.1:1 ratio belt. Includes 22 tooth...

V-Twin - 19-0691 - Rear Sprocket Flat Black 48 ToothDescription5-Spoke rear flat sprocket with a black finish. Sprocket is 48 tooth. Fits:XL 1982-1999Custom applicationAdditional Information

York compensator sprocket kit includes 24 tooth sprocket. Fits:FLST 1986-2006FXST 1984-2006FLT 1980-2006FL 1980-1984FXD 1991-2006FXR 1984-1994FX 1980-1984Additional Information

York compensator sprocket kit includes 25 tooth sprocket. Fits:FLST 1986-2006FXST 1984-2006FLT 1980-2006FL 1980-1984FXD 1991-2006FXR 1984-1994FX 1980-1984Additional Information

Transmission sprocket conversion kit is used to convert belt drive models to chain drive.Kit features a 108 link chain. Includes 22 tooth front sprocket and 48 tooth rear sprocket exact as stock with...

XL wide tire chain drive kit includes 23 tooth drive sprocket and 48 rear tooth sprocket with a 120 link, 530 chain. Fits:XL 1991-1999Additional Information UOM

Internal clutch retaining ring. Fits:FXD 1991-2003FXST 1990-1999FXR 1991-1994FLST 1990-1999FLT 1990-1999Additional Information

Chain tensioner plate Fits:FXD 1991-2000FXST 1984-2000FL 1965-1984FX 1971-1984FLST 1986-2000FXR 1984-1994FLT 1984-2000Additional Information

Clutch release inner ramp. Fits:FLT 1987-1999FXD 1991-1999FXR 1987-1994FLST 1987-1999FXST 1987-1999 5 speedAdditional Information

V-Twin - 18-0824 - Tamer Clutch Release KitDescriptionTamer clutch release kit includes the ramp, balls and gasket. Fits:FLST 1986-UPFXST 1986-UPFLT 1986-UPAdditional Information

Tamer soft pull clutch ramp assembly includes one inner ramp, one outer ramp, one cable coupling and three ball bearings. Fits:XL 1994-2022 except RHAdditional Information

York throw out bearing upgrade kit is for Big Twins. Kit includes throw out bearing, thrust washers and clutch release kit. Fits:FLT 1987-1999FLST 1987-1999FXST 1987-1999FXD 1987-1999Additional...

Tamer clutch ramp kit includes a 2 piece ramp assembly and related components.Includes the pull end! Fits:XL 1994-2020Additional Information UOM1 -

XL Tamer power clutch ramp kit is 45% easier clutch lever pull. No spacer or drilling needed for installation. Fits:XL 1994-2021Additional Information UOM

V-Twin - 18-0534 - XL Clutch Inner and Outer Clutch Release Ramp KitDescriptionClutch inner and outer release ramp kit for Sportster models. Fits:XL 1994-UPAdditional Information

V-Twin - 18-0516 - Tamer Clutch Release KitDescriptionTamer Power clutch release kit. Fits:FLST 1986-UPFXST 1986-UPFLT 1986-UPAdditional Information

Ptimary chain drive system is 76 link and features chain shoe adjuster assembly, clutch drum basket with starter ring gear, steel and fiber clutch plates with pressure plate assembly.Primary chain...