Touring Electra Glide Ultra Classic EFI FLHTCUI

Jims - 34623-83 Piston Pin Tool fits '84-'99 Big Twin (Except Twin Cam), '86-'03 Sportster Models Features: This tool will install “Round Circlip” rings in one easy step without distorting ring,...

Jims - 34643-84 Valve Seal Installer for all Evolution Valve Guide Seals (OEM #34643-84) Features: Available from JIMS to allow the proper removal or installation of shoulderless valve guides as...

Jims - 1010 Evolution Rod Alignment Tool for 0.791” Wrist Pin Features: Use to check rod straightness without removing the rods from the cases Made in the U.S.A.

Jims - 1012-70TB Cam Bushing Installer fits '70-'99 Big Twin Models (Except Twin Cam (OEM #25581-70)) Features: Use to install bushing and drill dowel pin hole to factory specification #31

Jims - 94805-57 Pinion Bushing Line Reamer fits '54-'99 Big Twin Models (Except Twin Cam) Features: Use on all Big Twin '54-'99 single cam only, (NOTE: Includes aftermarket motors, also XL '57 to...

Jims - 1041-TC Camshaft Cover Holder Tool fits '70-'99 Big Twin Models (Except Twin Cam) Features: Holds cam cover flat and helps prevent damage/scratches when removing and installing bushings

Jims - 95970-32C Piston Pin Bush Tool fits '36-'99 Big Twin, '57-'20 Sportster & Buell Models (Except 1125R) Features: Use to remove and install wrist pin bushings without removing rods from...

Jims - 977 Fork Stem Nut Wrench fits '96-'13 FLHT & '94-'13 FLHR Models Features: This tool allows the ability to loosen, tighten and torque to spec the 1-1/2” stem nut without radio removal

Jims - 96600-36B Valve Spring Compressor Tool fits '36-'04 Big Twin & '57-'03 Sportster Models Features: Comes with new valve collar receiver for safer tool usage, and can be clamped in vice

Jims - 97225-55 Sprocket Shift Bearing Installation Tool fits '55-'02 Big Twin Models Features: Used on '84-'02 Big Twin to install the flywheel assembly to the left crankcase Timken® bearing

Jims - 1743 Swingarm Bushing Tool fits '80-'01 FLT/​FLHT, '82-'99 FXR & all Aftermarket FXR-Style Frames Features: Allows installation of delicate, silicone cleveblock bushings in swingarm...

Jims - 34731-84 Valve Guide Installer fits all Evolution & '99-'04 Twin Cam Models (OEM #34731-84) Features: Available from JIMS to allow the proper removal or installation of shoulderless valve...

Jims - 1047-TP Crank Assembly Removal Tool fits '55-'06 Big Twin Models (Except '06 Dyna) Features: This tool can only be used for removing the flywheel from the left case Will also press c

Jims - 1030-TS Crank Pin Flywheel Socket fits 'L83-'99 Big Twin Models (OEM #23969-83) Features: Machined for 100% nut-to-socket and drive-end contact Eliminate nut rounding and risk of inj

Jims - 33071-73 Bearing Race Remover and Installer fits '73-'99 Big Twin, Sportster & Buell Wheels Features: Designed to remove and install bearing cups in cast wheels

Jims - 94660-37A Counter Shaft Sprocket Locknut Wrench fits '36-'06 Big Twin Models (Except '06 Dyna) Features: Removes hex nut from end of main drive gear that secures the rear drive...

Jims - 95760-TB Puller Camshaft Bearing fits '58-'99 Big Twin Models (Except Twin Cam) Features: Used to remove inner cam bearing without damaging the crankcase Tool is also designed to kee

Jims - 95760-TP Pinion Bearing Puller fits '54-'99 Big Twin Models Features: Use to remove pinion bushing from cam cover in one easy operation Use with JIMS® Cam Cover Holder

Custom Cycle Engineering - Swingarm Retrofit Kit fits '99-'01 FLT/​FLHT/​FLHR Models Features: Retrofits the improved swingarm from 02-08 Touring models to a 84-01 Touring models No need to...

Custom Cycle Engineering - Swingarm Retrofit Kit w/ Pivot Shaft fits '99-'01 FLT/​FLHT/​FLHR Models Features: Retrofits the improved swingarm from 02-08 Touring models to a 84-01 Touring...

Custom Cycle Engineering - 41 mm Ultra Chrome Fork Tubes fits 'L84-'99 Softail, '85-'86 FXWG, '93-'98 FXDWG, '85-'96 Touring Models (OEM #45827-84, 45417-84) Features: Designed to fit a wide...

Belt Drives Ltd. - 2" Drive Belt fits '99-'06 FLHT/​FLHR/​FLTR/​FLHX Models Features: Includes BDL's ball-bearing lockup clutch, new full-coverage side guard and top mesh belt guard Kit als

Colony - 9877-2 Cadmium Oil Screen Plug fits '70-'80 Big Twin Models (OEM #657) Features: Oil Screen plug for Big Twin models Made in the USA

Spyke - Starter Jackshaft Kit fits '99-'06 Twin Cam Models (Except '06 Dyna) - 10 Tooth Features: Complete assembly includes shaft extension, pinion gear, coupler, spring and clips Fitment

Colony - Floorboard Hinge Bolt Kit fits '82-'98 Touring Models (OEM #50635-82) Features: Includes four shoulder bolts, four 1/4" flat washers, four 1/4"-20 nylock nuts Made in the U.S.A.

Colony - 9876-2 Chrome Oil Screen Plug fits '70-'80 Big Twin Models (OEM #657) Features: Oil Screen plug for Big Twin models Made in the USA

Drag Specialties - 72-11/16" Black Vinyl High-Efficiency Clutch Cable fits '87-'06 Big Twin, '86-'13 Sportster Models (Except '06 Dyna Glide) - Alternative Length Features: Cables feature chrome...

Drag Specialties - 76-11/16" Black Vinyl High-Efficiency Clutch Cable fits '87-'06 Big Twin, '86-'13 Sportster Models (Except '06 Dyna Glide) - Alternative Length Features: Cables feature chrome...

Drag Specialties - 54-3/4" Black Vinyl High-Efficiency Clutch Cable (Repl. OEM #38699-04) Features: Cables feature chrome fittings, black vinyl outer casings, tempered-steel inner wire and a...

Drag Specialties - 11.5" Rear Center Hub Mount Drilled Brake Rotor - Polished Stainless Steel (Repl. OEM # 40939-86A) Drag's Polished Stainless Steel Drilled Brake Rotors are drilled for improved...

Drag Specialties - Spark Plug fits '75-'84 Shovelhead (Cold), '84-'99 Evolution Big Twin Models This spark plug features a copper core electrode, which prevents oxidation and corrosion, provides...

Cobra - 909 Uppercut Slip-On Mufflers fits '95-'16 Harley Touring Models (Exc. '15-'16 FLRT Models) - Raven Black These mufflers are a special blend of performance, price, sound and style and are...

Khrome Werks - HP-Plus 4.5" Slip-On Mufflers W/ Black Klassic Billet End Caps fits '99-'16 Harley Touring Models - Chrome Features: Engineered for performance, style and sound Produce the Khrome...

Khrome Werks - 4-1/2" HP-Plus® Slip-On Mufflers W/ Black Klassic Billet End Caps fits '95-'16 Touring Models - Black Khrome Werks' 4-1/2" HP-Plus® Slip-On Mufflers are built for three things:...

Khrome Werks - HP-Plus 4.5" Slip-On Mufflers W/ Black Tracer Billet End Caps fits '99-'16 FLT/​FLHT/​FLHR/​FLHX/​FLTR Models (Cont) - Chrome Khrome Werks' 4-1/2" HP-Plus® Slip-On Mufflers are built...

Khrome Werks - HP-Plus 4.5" Slip-On Mufflers W/ Black Tracer Billet End Caps fits '99-'16 FLT/​FLHT/​FLHR/​FLHX/​FLTR Models (Cont) - Black Khrome Werks' 4-1/2" HP-Plus® Slip-On Mufflers are built...

Khrome Werks - 4-1/2" HP-Plus® Slip-On Mufflers W/ Black Turbine Billet End Caps fits '95-'16 Touring Models - Chrome Khrome Werks' 4-1/2" HP-Plus® Slip-On Mufflers are built for three things:...

Khrome Werks - 4-1/2" HP-Plus® Slip-On Mufflers W/ Black Turbine Billet End Caps fits '95-'16 Touring Models - Black Khrome Werks' 4-1/2" HP-Plus® Slip-On Mufflers are built for three things:...

Khrome Werks - 4-1/2" HP-Plus® Slip-On Mufflers W/ Black Edge Billet Tip End Caps fits '95-'16 Touring Models - Black Khrome Werks' 4-1/2" HP-Plus® Slip-On Mufflers are built for three things:...

Khrome Werks - 4-1/2" HP-Plus® Slip-On Mufflers W/ Black Edge Billet Tip End Caps fits '95-'16 Touring Models - Chrome Khrome Werks' 4-1/2" HP-Plus® Slip-On Mufflers are built for three things:...