Softail Fat Boy FLSTF

Jims - 35316-80 5-Speed Main Drive Gear Tool fits '80-'06 Big Twin (Except '06 Dyna) & '91-'06 Sportster Models Features: Installs the main drive gear without removing the transmission

Jims - 34902-84 Mainshaft Bearing Race Tool fits 'L84-'20 Big Twin Models Features: Used to remove and install the inner bearing race on the transmission mainshaft Made in the U.S.A.

Jims - 34623-83 Piston Pin Tool fits '84-'99 Big Twin (Except Twin Cam), '86-'03 Sportster Models Features: This tool will install “Round Circlip” rings in one easy step without distorting ring,...

Jims - 34643-84 Valve Seal Installer for all Evolution Valve Guide Seals (OEM #34643-84) Features: Available from JIMS to allow the proper removal or installation of shoulderless valve guides as...

Jims - 1010 Evolution Rod Alignment Tool for 0.791” Wrist Pin Features: Use to check rod straightness without removing the rods from the cases Made in the U.S.A.

Jims - 1012-70TB Cam Bushing Installer fits '70-'99 Big Twin Models (Except Twin Cam (OEM #25581-70)) Features: Use to install bushing and drill dowel pin hole to factory specification #31

Jims - 94805-57 Pinion Bushing Line Reamer fits '54-'99 Big Twin Models (Except Twin Cam) Features: Use on all Big Twin '54-'99 single cam only, (NOTE: Includes aftermarket motors, also XL '57 to...

Jims - 1041-TC Camshaft Cover Holder Tool fits '70-'99 Big Twin Models (Except Twin Cam) Features: Holds cam cover flat and helps prevent damage/scratches when removing and installing bushings

Jims - 95970-32C Piston Pin Bush Tool fits '36-'99 Big Twin, '57-'20 Sportster & Buell Models (Except 1125R) Features: Use to remove and install wrist pin bushings without removing rods from...

Jims - 74437-96 Electronic Speedometer Sensor fits '00-'06 Softail Models (OEM #74430-00, 74430-00D, 74437-96) Features: Top-quality replacement sensor Also works on any aftermarket transmi

Jims - 2232 Bearing Race Tool fits '84-'17 Big Twin (Except '14-'17 Dressers), '86-'22 Sportster & '94-'02 Buell OEM Frames (Will Also Work on Most Aftermarket Frames) Features: Removes and...

Jims - 96600-36B Valve Spring Compressor Tool fits '36-'04 Big Twin & '57-'03 Sportster Models Features: Comes with new valve collar receiver for safer tool usage, and can be clamped in vice

Jims - 97225-55 Sprocket Shift Bearing Installation Tool fits '55-'02 Big Twin Models Features: Used on '84-'02 Big Twin to install the flywheel assembly to the left crankcase Timken® bearing

Jims - 34731-84 Valve Guide Installer fits all Evolution & '99-'04 Twin Cam Models (OEM #34731-84) Features: Available from JIMS to allow the proper removal or installation of shoulderless valve...

Jims - 1047-TP Crank Assembly Removal Tool fits '55-'06 Big Twin Models (Except '06 Dyna) Features: This tool can only be used for removing the flywheel from the left case Will also press c

Jims - 1030-TS Crank Pin Flywheel Socket fits 'L83-'99 Big Twin Models (OEM #23969-83) Features: Machined for 100% nut-to-socket and drive-end contact Eliminate nut rounding and risk of inj

Jims - 33071-73 Bearing Race Remover and Installer fits '73-'99 Big Twin, Sportster & Buell Wheels Features: Designed to remove and install bearing cups in cast wheels

Jims - 94660-37A Counter Shaft Sprocket Locknut Wrench fits '36-'06 Big Twin Models (Except '06 Dyna) Features: Removes hex nut from end of main drive gear that secures the rear drive...

Jims - 95760-TB Puller Camshaft Bearing fits '58-'99 Big Twin Models (Except Twin Cam) Features: Used to remove inner cam bearing without damaging the crankcase Tool is also designed to kee

Jims - 95760-TP Pinion Bearing Puller fits '54-'99 Big Twin Models Features: Use to remove pinion bushing from cam cover in one easy operation Use with JIMS® Cam Cover Holder

Custom Cycle Engineering - 41 mm Ultra Chrome Fork Tubes fits 'L84-'99 Softail, '85-'86 FXWG, '93-'98 FXDWG, '85-'96 Touring Models (OEM #45827-84, 45417-84) Features: Designed to fit a wide...

Avon - Memory Foam Cable Throttle Grips Features: The softest, most durable, chemical resistant grips on the market today A true vibration dampening grip

V-Twin - Panhead Style Evolution Rocker Box Set fits '84-'99 FXST/FLST, '84-'98 FLT/FXD Models - Black Panhead Evolution rocker box set features a bolt on Panhead look for Evolution models and a...

Rubber pad for the dash cover Fitment: FXST 1984-1999 FLST 1986-1999

Colony - 9877-2 Cadmium Oil Screen Plug fits '70-'80 Big Twin Models (OEM #657) Features: Oil Screen plug for Big Twin models Made in the USA

Colony - 3547-5 Sprocket Bolt Zinc Plated Washer Kit fits '82-'94 FXR, '91-'17 FXD, '79-Up Sportster Models Zinc plated spring steel washers used on 7/16" rear sprocket bolts Fitment: FXST...

V-Twin - Chrome Rear Disc Bolt and Nut Kit fits '92-'17 FXD & '92-Up FLST/FLT/FXST/Sportster Models Chrome rear disc to hub bolt and nut kit with 3/8"-16 x 1 threads Fitment: XL 1992-UP FLST 1992-UP...

V-Twin - Chrome Rear Brake Disc Bolts fits '92-Up XL/FLST/FLT/FXST, '92-'17 FXD Models (OEM #43567-92) Chrome rear brake disc bolts with a 3/8" x 16 x 1" thread size and features a round button head...

Colony - 9854-28 Chrome Upper and Lower Engine Bolts fits '84-'99 FXST, '86-'99 FLST Models Upper and lower engine mount bolts with a chrome finish  Fitment: FXST 1984-1999 FLST 1986-1999

V-Twin - Chrome Pike Style Axle Kit fits '84-'99 FXST & '86-'99 FLST Models Custom rear pike style has a 12-3/8" bearing surface length Fitment: FXST 1984-1999 FLST 1986-1999 Measurements: Bearing...

V-Twin - 3/4" Inner Diameter Front Axle Spacer '86-'95 FLST Model (OEM #43654-86A) Chrome front axle spacer is for the left side and fits on 1986-up FLST. Spacer has an overall length of 3/4"...

V-Twin - Axle Kit Acorn Style fits '84-'99 FXST, '86-'99 FLST Models Custom rear axle acorn style has a 12-3/8" bearing surface length Fitment: FXST 1984-1999 FLST 1986-1999 Measurements: Bearing...

V-Twin - Black Finned Derby Cover fits '84-'98 FXST, '85-'94 FXR, '86-'98 FLST Models Finned derby cover features a powder coated black finish. Order gasket and screws separately. Fitment: FL...

V-Twin - Black Saddlebag Kit fits '86-'99 FLST/FXST Models Black softail saddlebag kit includes left and right "hard bags" with lids that are constructed of fiberglass reinforced polymer (FRP)...

Colony - 9873-16 Inner Primary Mount Kit fits '94-'99 FXST/FXD/FLST Models Inner primary mount kit contains all stock type hardware for mounting aluminum inner chain housing. Fitment: FXST...

Colony - 9883-20 Chrome Engine Case Flanged Bolt Kit fits '96-'99 FLT/FXD/FXST/FLST Models Chrome flanged engine case bolt kit Fitment: FLT 1996-1999 FXD 1996-1999 FXST 1996-1999 FLST...

Colony - 9923-5 Chrome Front Axle Spacer Kit Smooth Style fits '96-'99 FLSTF Model (OEM #43657-89) Chrome front axle spacer kit smooth style will fit 1996-1999 FLSTF. Kit includes washers and...

Colony - 9964-2 Chrome Washer Fork Tube Plug fits '84-Up FXST, '77-'86 FX, '86-Up FLST Models (OEM #5710) Chrome fork tube plug washer Fitment: FXST 1984-UP FX 1977-1984 FLST 1986-UP FX...

Colony - 9977-1 Chrome Fork Triple Tree Stem Cap fits '84-Up FXST,  '86-'94 FXR, '86-Up FLST/Sportster Models Chrome fork triple tree stem cap Fitment: FXST 1984-UP XL 1986-UP FXR...

V-Twin - Chrome Domed Fork Triple Tree Stem Nut fits '86-'94 FXR, '91-Up FXD, '86-Up FLST/Sportster Models Chrome domed triple tree fork stem nut. Fitment: XL 1986-UP FXR 1986-1994 FLST 1986-UP FXD...