Dyna Wide Glide FXDWG

Fork tubes are 24-1/4" stock lengthBefore installing, compare old and new tubes. Be sure the stock top plug threads into the new fork tubes. Sold as a pair. *NOTE:...

Chrome fork tube set is 20-7/8" stock length.Before installing, compare old and new tubes. Be sure the stock top plug threads into the new fork tubes. Sold as a pair. ...

Raked fork neck cup kit with 3  rake.3  raked fork neck cup kit includes chrome cups, bearings, and dust shields, stop tab and longer stem. Raked neck bearing and race kits will require longer fork...

V-Twin - 24-0375 - Lower Fork Damper TubeDescriptionLower fork damper tube.Sold as a pair. Fits:FXD 1991-2005XL 1990-UPAdditional Information

V-Twin - 24-0363 - 41mm Fork Boot Covers ChromeDescriptionBoot covers are die cast to fit over the stock rubber fork wiper boot.Set of two. Fits:FXDWG 1991-2017FXST 1991-UPAdditional Information

V-Twin - 24-0335 - Chrome Top Fork Tube Plugs without HoleDescriptionChrome top fork plugs without hole is for 39mm. Plug has a flat top.Sold as a pair. Fits:XL 1988-UPFXD 1991-2017FXR...

Kit includes a chrome cup set, bearing set, dust shields, and a longer fork stem and adapter.The longer fork stem and adapter fits the neck but will not accept stock fork stem lock. This has a built...

Kit includes chrome cup set, bearing set, dust shields, and a longer fork stem and adapter.Kit replaces existing removable cups to provide 3  rake when installed. The longer fork stem and adapter...

Kit includes brackets and adjustable round body damper piston. Fits:FXD 1991-2005Additional Information UOM1 - KIT

Upper fork slider bushing set is 39mm.Sold as a pair. Fits:FXD 1991-2005FXR 1988-1994XL 1988-1994Additional Information OEM No.45

V-Twin - 24-0181 - 39mm Fork Slider Lower Bushing SetDescriptionLower fork slider bushing set is 39mmSold as a pair. Fits:FXD 1991-2005XL 1988-UPFXR 1988-1994Additional Information

20th century fork spring lowering kit for Showa forks have progressively wound springs that resist bottoming out and features high quality and performance. Kit includes springs, spcers and hardware...

V-Twin - 24-0117 - Upper and Lower Zinc Dust ShieldsDescriptionSet includes both an upper and lower dust shields. Each shield is zinc and is for use with Timken style bearings.Sold as a pair...

V-Twin - 24-0114 - Upper and Lower Chrome Dust ShieldsDescriptionChrome upper and lower triple tree dust shield set is for use on Big Twin models with Timken style bearings.The lower cover is the...

V-Twin - 24-0112 - Lower Triple Tree Zinc Dust ShieldDescriptionZinc lower dust shields have an inner diameter of 51mm for fork neck cup kit. Fits:FXD 1991-2005FL 1960-1984FXST 1984-UPFX 1971-1984FXR...

Kit comes with boot covers and dust seals. Fits:FXD 1991-2005FXR 1987-1994XL 1988-2005Additional Information UOM1 - KIT

Fork tubes are 20-7/8" stock length.Before installing, compare old and new tubes. Be sure the stock top plugs thread into the new fork tubes. Sold as a pair. *NOTE:...

Fork tubes are 24-1/4" stock length.Tube set is stock FXST length but would be an extended length if used on FLST. Set of two. Before installing, compare old and new tubes. Be sure the stock top plug...

Fork tube set is stock length 23-3/8".Before installing, compare new and old tubes. Be sure the stock top plug threads it into the new fork tubes. Sold as a pair. *NOTE:...

Fork tubes are 25-3/8" stock length.Before installing, compare old and new tubes. Be sure the stock top plug threads fit into the new fork tubes. Sold as a pair. *NOTE:...

Front brake caliper guide pin kit. Fits:FXST 1993-1999 Except FXSTSXL 1993-1999FXD 1993-1999FXR 1993-1994FLST 1993-1999FLT 1993-1999Additional Information

Chrome rear brake rod is 22-1/2" long. Fits:FXDWG 1992-2002Additional Information OEM No.41955-93 UOM

Chrome 4 piston brake caliper kit is direct replacement for stock caliper and bracket. The pistons are hard anodized aluminum for superior operation and long life. Brake pad springs eliminate rattles...

V-Twin - 23-2012 - Rebuild Kit for Rear CaliperDescriptionThis rebuilt kit includes all necessary hardware, piston and seal kit for a full caliper overhaul. Fits:FLT 1987-1999FXD 1991-1999FXR...

Polished stainless steel 11-1/2" front brake disc is a 5-spoke style.This disc accepts the center ring and washers. Fits: FXST 1984-1999 FXD 1991-1999 FLST 1986-1999 XL 1984-1999 FXR 1984-1994 ...

Kit includes a chrome caliper with bracket, 11-1/2" polished stainless steel drilled disc, Dura soft rear brake pad set, and chrome rear caliper mount bolt set. Fits:FXD 1990-1999FXDWG...

Bolt kit is for use with front or rear universal or stock lines with 12mm hole size. Bolt is 7/16-24 with a 6 point head. Fits:FXST 1984-2010XL 1984-2003FXD 1991-2010Additional Information

Chrome flat brake rod is 12" long with a hole at the one end and threaded at the other.Thread is 5/16-24. Fits:FXD 1991-2017Additional Information OEM No.

Includes a 4 piston chrome caliper, a polished stainless steel drilled 11.5" front disc, and the front disc allen screw kit.*Note: UPS may consider this part as packaged "oversize" for shipment, as...

Includes a polished stainless steel Dura disc with bolts and a chrome caliper half with brake pads.Includes hardware for left side application on 41mm forks. Fits:FXST 1984-1999FXDWG 1991-1999FLST...

Chrome billet front brake caliper with bracket for left side.Caliper is for 11-1/2" rotors. For use with 39mm and 41mm forks. Fits:FXST 1984-1999FXD 1991-1999FLST 1986-1999XL 1984-1999Additional...

Chrome front left and right caliper Set. Fits:FXST 1984-1999FLT 1984-1999FXD 1991-1999FLST 1986-1999XL 1984-1999FXSTS 1988-1999FXR 1984-1994Additional Information

FXD mid control kit includes polished components.Includes right and left sides. Fits:FXD 1991-2005Additional Information UOM1 - KIT

FXD mid control kit includes chrome components.Includes right and left sides. Fits:FXD 1991-2005Additional Information UOM1 - KIT

Rear caliper kit includes a chrome rear caliper, a chrome Softail rear caliper bracket, an 11-1/2" drilled rear brake disc, a vibration shim for brake pad and a disc allen bolt set. Fits:FXD...

Black smooth contour handlebar control kit with switches. Has a 9/16" bore master cylinder, brake and clutch lever, switch housings, and hardware. Fits:FXST 1996-2007FLST 1996-2007XL 1996-2003FXD...

Handlebar control kit with switches includes a 11/16" bore master cylinder, clutch handle with clamp, and 2 pair of switch housings with 48" wires for dual disc.

Handlebar control kit without switches includes a 11/16" bore master cylinder, switch housings, clutch handle with clamp. Kit is for dual disc applications. Fits:FXST 1996-2006XL 1996-2003FLST...

Handlebar control kit without switch set includes 9/16" bore master cylinder with grooved top cover, clutch handle with clamp, and hardware. Kit is for single disc application. Fits:FXST 1996-2006XL...

Black smooth contour handlebar control kit without switches has a 9/16" bore master cylinder, brake and clutch lever, switch housings and hardware.Handlebar control kit without switches features...