Touring Road King FLHR

V-Twin - 11-0571 - Rocker Arm Shaft SetDescriptionSifton rocker arm 4 piece shaft set for 1986-up. Fits:FLT 1984-2016FXD 1991-2017XL 1986-UPFLST 1986-2017FXST 1984-2017FXR 1984-1994Additional...

Evolution Shovelhead rocker box set accepts 1/2" x 20 end plugs. Features a natuarl cast aluminum construction with shot peened finish and cast shape readily accepts a black VHT finish.Allen screws...

Alloy lifter block set for Evolution engines. Fits:FLT 1985-1999FLST 1985-1999FXST 1985-1999Additional Information UOM1 - SET

Evolution cam cover trim feature an alloy construction. Bolts to stock cam cover on 1986-99 Big Twin models to give the early Shovelhead Flatside style, cover is natural cast for original style...

Bolt-on 4-finned cam cover kit for Evolution models to give it a Retro-style Panhead look!Kit includes a chrome forged aluminum 4-finned cam cover with bushings installed, cast aluminum cam cover...

Bolt-on cam cover kit for Evolution models to give it the Retro-style 1965 Panhead look.Kit includes a replica cast cam cover flatstide style with bushings installed, cast aluminum cam cover adapter...

Cast aluminum cam cover dress up adapter trim allows use of the early retro-style Panhead cam cover to fit Evolution models.Mounts to existing nose cone cover. *NOTE: Actual cam cover not included...

Cover for Big Twin models features installed bushings and includes seal.Include hardware and gasket. Fits:FXD 1993-1999FXST 1993-1999FXR 1993-1994FLST 1993-1999FLT 1993-1999Additional Information

Oil pump check and relief valve plug with a chrome finish. Fits:FLT 1981-1998FXST 1984-1998FXR 1982-1994FXD 1991-1998FL 1981-1984FLST 1986-1998FX 1981-1984Additional Information

Chrome allen screw kit for primary cover. Fits:FLT 1985-1999FXR 1985-1994Additional Information UOM1 - KIT

Transmission shifter cover screw, allen type. Fits:FLT 1987-1999FXR 1987-1994FLST 1987-1999FXST 1987-1999Additional Information UOM

V-Twin - 7508-20T - Chrome Pushrod Cover and Clip KitDescriptionChrome pushrod cover and clip kit includes 4 clips and cups, seals, springs and cork washers. Fits:FXST 1984-UPFL 1940-1947FXD...

V-Twin - 54-0421 - Chrome Shock Stud Washers 1/2 inch HoleDescriptionChrome 1/2" hole x 1" flat shock stud washers Fits:FLT 1997-UPFXR 1982-1994FL 1965-1984FX 1971-1984XL 1975-UPFXD...

V-Twin - 53-0913 - East Penn AGM BatteryDescriptionBattery features Absorbed Glass Mat technology. Fits:FLT 1997-UPAdditional Information

V-Twin - 52-1291 - 23 inch x 3.0 Drop Center Chrome Wheel RimDescriptionFront 23" chrome drop center rim has an outside width of 3.0" with 2 flat flanges and 40 holes.The outside width measures 3.65"...

16" x 3.00" rear wheel assembly includes a chrome profile smoothie rim, steel chrome hub with 3/4" bearings installed, and chrome spokes.**NOTE: All spokes on wheel need to be inspected and...

Front 23" x 3.00" wheel assembly features chrome spokes, chrome hub, and chrome rim. This wheel comes with 3/4" bearings and fits dual disc applications.*Note: UPS may consider this part as packaged...

Front 16" x 3.00" wheel include chrome hub with internals, chrome drop center rim, and 40 chrome twirled spokes.**NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of...

16" x 3.00" rear wheel features a chrome rim, chrome hub with internals, and 40 twirled spokes assembled.**NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of original...

Replica 16" x 3.00" rear wheel assembly features 40 chrome spokes, chrome hub with bearings, races, seals, and seal spacers, and a chrome drop center rim with small side valve stem.**NOTE: All spokes...

16" x 3.00" Replica dual disc front wheel features wheel hub with 3/4" bearings, chrome rim, and 40 chrome spokes.**NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of...

Replica rear 16" x 3.00" wheel assembly features a chrome drop center rim, chrome hub, and stainless steel spoke set.**NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of...

21" x 3.25" Replica dual disc front wheel features wheel hub with 3/4" bearings, chrome rim, and 40 chrome spokes.NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of...

Front 16" x 3.5" Duro 26 Fat Spoke wheel features a matte black finish and 25mm bearings.Wheel will accept dual 11" rotors. Wheel hub includes bearings installed. Wheel can be used with 11" rotors...

Front 16" x 3.5" Duro 36 Fat Spoke wheel features a matte black finish and 3/4" bearings.Wheel will accept dual 11" rotors. Wheel hub includes bearings installed. Wheel can be used with 11" rotors...

Front 21" x 3.15" Duro 36 Fat Spoke cast type wheel is dual disc, and features a matte black finish with 25mm bearings.Wheel bearing adapter sleeve sets, available separately. ...

Touring torque linkage system features a black finish and will fit all Touring models with no modifications necessary to install unit.This unit will eliminate the lateral movement while still...

Touring torque linkage system features a chrome finish and will fit all Touring models with no modifications necessary to install unit.This unit will eliminate the lateral movement while still...

Engine mount shim is used to raise motor for front or rear clearance, when necessary.Sold in a pack of 5. Fits:FL 1941-1999EL 1936-1952Additional Information

Nerf engine bar features a black finish and is manufactured with 1-1/2" steel tubes. Engine bar is for Touring models and can only be mounted by bolts. Engine bar will not fit Police models. Fits:FLT...

Nerf engine bar features a chrome finish and is manufactured with 1-1/2" steel tubes.Engine bar is for Touring models and can only be mounted by bolts. ...

Engine bar set features left and right sides with 1-1/4" tubing. For use with stock type saddle bag supports.2004-08 FLTR, FLHX, FLHRS models requires the separate pruchase of OEM #90781-93 Lower...

Bar complements the traditional Touring style and features 1-1/4" tubing.WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over...

Bar complements the traditional Touring style and features 1-1/2" diameter tubing.**WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances...

Front engine bar features a black finish.Does not fit models equipped with fairing lowers. Fits:FLT 1997-2008 except Road GlideAdditional Information UOM

Rear engine bar set with black finish. Set includes saddle bag supports, left and right guards, and hardware to replace the under the saddlebag support with loop style saddlebag guards for a...

Chrome left and right pivot mount end caps with footpeg mount holes.The OEM number for the right end cap is 50589-93, and the OEM number for the left end cap is 50588-93. Fits:FLT 1982-1984FLT...

Chrome engine bar features integrated rubber pads for foot rests.WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while...

Engine bar set features left and right sides with 1-1/4" tubing. For use with stock type saddle bag supports.2004-08 FLTR, FLHX, FLHRS models requires the seperate purchase of OEM #90781-93 Lower...

Rear frame set bar features left and right sides with 7/8" tubing.The stock shape reflectors are not included. *NOTE: Not for use with saddlebag rails. **WARNING: This frame bar may provide limited...