Softail Springer FXSTS

Jims - 34643-84 Valve Seal Installer for all Evolution Valve Guide Seals (OEM #34643-84) Features: Available from JIMS to allow the proper removal or installation of shoulderless valve guides as...

Jims - 1010 Evolution Rod Alignment Tool for 0.791” Wrist Pin Features: Use to check rod straightness without removing the rods from the cases Made in the U.S.A.

Jims - 1012-70TB Cam Bushing Installer fits '70-'99 Big Twin Models (Except Twin Cam (OEM #25581-70)) Features: Use to install bushing and drill dowel pin hole to factory specification #31

Jims - 94805-57 Pinion Bushing Line Reamer fits '54-'99 Big Twin Models (Except Twin Cam) Features: Use on all Big Twin '54-'99 single cam only, (NOTE: Includes aftermarket motors, also XL '57 to...

Jims - 1041-TC Camshaft Cover Holder Tool fits '70-'99 Big Twin Models (Except Twin Cam) Features: Holds cam cover flat and helps prevent damage/scratches when removing and installing bushings

Jims - 95970-32C Piston Pin Bush Tool fits '36-'99 Big Twin, '57-'20 Sportster & Buell Models (Except 1125R) Features: Use to remove and install wrist pin bushings without removing rods from...

Jims - 74437-96 Electronic Speedometer Sensor fits '00-'06 Softail Models (OEM #74430-00, 74430-00D, 74437-96) Features: Top-quality replacement sensor Also works on any aftermarket transmi

Jims - 2232 Bearing Race Tool fits '84-'17 Big Twin (Except '14-'17 Dressers), '86-'22 Sportster & '94-'02 Buell OEM Frames (Will Also Work on Most Aftermarket Frames) Features: Removes and...

Jims - 96600-36B Valve Spring Compressor Tool fits '36-'04 Big Twin & '57-'03 Sportster Models Features: Comes with new valve collar receiver for safer tool usage, and can be clamped in vice

Jims - 97225-55 Sprocket Shift Bearing Installation Tool fits '55-'02 Big Twin Models Features: Used on '84-'02 Big Twin to install the flywheel assembly to the left crankcase Timken® bearing

Jims - 34731-84 Valve Guide Installer fits all Evolution & '99-'04 Twin Cam Models (OEM #34731-84) Features: Available from JIMS to allow the proper removal or installation of shoulderless valve...

Jims - 1047-TP Crank Assembly Removal Tool fits '55-'06 Big Twin Models (Except '06 Dyna) Features: This tool can only be used for removing the flywheel from the left case Will also press c

Jims - 1030-TS Crank Pin Flywheel Socket fits 'L83-'99 Big Twin Models (OEM #23969-83) Features: Machined for 100% nut-to-socket and drive-end contact Eliminate nut rounding and risk of inj

Jims - 33071-73 Bearing Race Remover and Installer fits '73-'99 Big Twin, Sportster & Buell Wheels Features: Designed to remove and install bearing cups in cast wheels

Jims - 94660-37A Counter Shaft Sprocket Locknut Wrench fits '36-'06 Big Twin Models (Except '06 Dyna) Features: Removes hex nut from end of main drive gear that secures the rear drive...

Jims - 95760-TB Puller Camshaft Bearing fits '58-'99 Big Twin Models (Except Twin Cam) Features: Used to remove inner cam bearing without damaging the crankcase Tool is also designed to kee

Jims - 95760-TP Pinion Bearing Puller fits '54-'99 Big Twin Models Features: Use to remove pinion bushing from cam cover in one easy operation Use with JIMS® Cam Cover Holder

Avon - Memory Foam Cable Throttle Grips Features: The softest, most durable, chemical resistant grips on the market today A true vibration dampening grip

V-Twin - Panhead Style Evolution Rocker Box Set fits '84-'99 FXST/FLST, '84-'98 FLT/FXD Models - Black Panhead Evolution rocker box set features a bolt on Panhead look for Evolution models and a...

V-Twin - 41mm Narrow Tree Kit fits '84-'99 FXST Models 41mm narrow glide kit features an upper and lower triple tree. Stock rake in alloy finish. 1" stem, 3/4" axle and stem nut included. Top tree...

Belt Drives Ltd. - 1-5/8" Belt Drive Kit fits '00-'06 FXST/​FLST & '99-'05 Dyna Models Features: 1-5/8" kits include front pulley, belt, clutch hub, clutch basket and aramid clutch set (consists...

Rubber pad for the dash cover Fitment: FXST 1984-1999 FLST 1986-1999

Includes speed nut, bushing, and allen head bolt. Fitment: FXST 1984-1999  

Colony - 9884-20 Zinc Motor Case Bolt Kit fits '96-'98 Evolution Big Twin Models (OEM #3398, 3504A) Features: Includes all necessary hardware for bolting together the motor case

Colony - 9877-2 Cadmium Oil Screen Plug fits '70-'80 Big Twin Models (OEM #657) Features: Oil Screen plug for Big Twin models Made in the USA

Colony - 3547-5 Sprocket Bolt Zinc Plated Washer Kit fits '82-'94 FXR, '91-'17 FXD, '79-Up Sportster Models Zinc plated spring steel washers used on 7/16" rear sprocket bolts Fitment: FXST...

V-Twin - Chrome Rear Disc Bolt and Nut Kit fits '92-'17 FXD & '92-Up FLST/FLT/FXST/Sportster Models Chrome rear disc to hub bolt and nut kit with 3/8"-16 x 1 threads Fitment: XL 1992-UP FLST 1992-UP...

Colony - 9810-4 Chrome Rear Axle Spacer Kit fits '87-Up FXST Model Chrome rear axle spacer kit stock include left side spacer adjuster collars and castle nut Fitment: FXST 1987-UP Rear Fitment

Colony - 9818-5 Chrome Rear Brake Disc Bolts fits '97-'17 FXD, '97-Up FLT/FXST/FLST Models (OEM #43567-92) Chrome rear brake disc bolts with a 3/8"-16 x 1" thread size and features a round button...

V-Twin - Chrome Rear Brake Disc Bolts fits '92-Up XL/FLST/FLT/FXST, '92-'17 FXD Models (OEM #43567-92) Chrome rear brake disc bolts with a 3/8" x 16 x 1" thread size and features a round button head...

Colony - 9826-4 Chrome Front Axle Spacer Kit Smooth Style fits '84-Up FXST Model Chrome front axle spacer kit smooth style will fit 1984-up FXST. Kit inlcudes washers and nuts Fitment: FXST...

Colony - 9854-28 Chrome Upper and Lower Engine Bolts fits '84-'99 FXST, '86-'99 FLST Models Upper and lower engine mount bolts with a chrome finish  Fitment: FXST 1984-1999 FLST 1986-1999

V-Twin - Chrome Pike Style Axle Kit fits '84-'99 FXST & '86-'99 FLST Models Custom rear pike style has a 12-3/8" bearing surface length Fitment: FXST 1984-1999 FLST 1986-1999 Measurements: Bearing...

V-Twin - Axle Kit Acorn Style fits '84-'99 FXST, '86-'99 FLST Models Custom rear axle acorn style has a 12-3/8" bearing surface length Fitment: FXST 1984-1999 FLST 1986-1999 Measurements: Bearing...

V-Twin - Black Saddlebag Kit fits '86-'99 FLST/FXST Models Black softail saddlebag kit includes left and right "hard bags" with lids that are constructed of fiberglass reinforced polymer (FRP)...

Colony - 9873-16 Inner Primary Mount Kit fits '94-'99 FXST/FXD/FLST Models Inner primary mount kit contains all stock type hardware for mounting aluminum inner chain housing. Fitment: FXST...

Colony - 9883-20 Chrome Engine Case Flanged Bolt Kit fits '96-'99 FLT/FXD/FXST/FLST Models Chrome flanged engine case bolt kit Fitment: FLT 1996-1999 FXD 1996-1999 FXST 1996-1999 FLST...

Colony - 9964-2 Chrome Washer Fork Tube Plug fits '84-Up FXST, '77-'86 FX, '86-Up FLST Models (OEM #5710) Chrome fork tube plug washer Fitment: FXST 1984-UP FX 1977-1984 FLST 1986-UP FX...

Colony - 9977-1 Chrome Fork Triple Tree Stem Cap fits '84-Up FXST,  '86-'94 FXR, '86-Up FLST/Sportster Models Chrome fork triple tree stem cap Fitment: FXST 1984-UP XL 1986-UP FXR...

V-Twin - CV Carburetor Fuel Mixture Screw fits '93-'06 FXR/FLT/FLST/FXST '88-'06 Sportster Models CV carburetor fuel mixture screw are extended length for easy accessability. For CV carburetors...