Touring Electra Glide Classic FLHTC

Bar complements the traditional Touring style and features 1-1/4" tubing.WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over...

Black engine bar features integrated rubber pads for foot rests.WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while...

Passenger footboard set with swingarm mount kit includes streamline style mini footboards.A Wyatt Gatling patch is included in the kit. Installation will require re-installation of the original...

Chrome swingarm mount kit includes right & left side chrome pivot caps, passenger footboard mounts and passenger footboard with rubber pads.Installation will require re-installation of the original...

Chrome rear frame bar set. Top of the bar is angled downward to allow for more passenger leg room.*WARNING: This frame bar may provide limited leg and cosmetic vehicle protection under unique...

Profile frame bar set features left and right sides with 7/8" chrome plated tubing. For use with stock type saddlebag supports.The unique shape of these guards gives the passenger more leg room. Not...

Fairing outer shell is made from fiber reinforced plastic. This shell includes brass inserts to accept screws to mount to the inner fairing.This outer shell allows use of the stock hardware. ...

Mid control mount kit is used to mount to the two holes located in the lower frame brace. Kit features a black finish.Mount features holes on each side for the left and right foot brake peg mount...

10" dark smoke Batwing fairing windshield. Fits:FLHT 1996-2013FLHX 1996-2013Additional Information OEM No.58303-96

7" dark smoked wind splitter windshield for the Batwing fairing is easy to install and gives the fairing a more stylish look while decreasing the wind noise. Constructed of Lexan material.NOTE: Does...

10" clear Batwing fairing windshield.Reduces helmet buffeting while allowing a view unobstructed by dirt, bugs and raindrops. Constructed of hardcoated polycarbonate for strength and scratch...

Fairing air deflector set with dark smoke tint reduces draft behind the fairing.Designed to deflect air away from the driver's elbow and upper torso. *NOTE: The mounting hardware must be ordered...

Beaded windshield is 21-3/4" tall and is for 1967-2010 Sidecars.Installation hardware not included, must be ordered separately. There are 5 mount holes altogether. Fits:FLT 1987-2010Additional...

V-Twin - 50-2082 - Detachable Passenger Backrest Sissy Bar ChromeDescriptionDetachable passenger backrest sissy bar features a chrome finish. Fits:FLHT 1997-2008FLHR 1997-2008FLHX 1997-2008FLTR...

Rear detachable docking hardware bracket set includes the left and right docking point brackets in a black finish.All necessary hardware is included. Sold as a set of 2. ...

V-Twin - 50-1148 - Zinc Plated Fender BracketDescriptionZinc plated steel bracket used to adapt one piece FXDF front fenders to fit FLH forks on 1949-up 41mm models.Set of two. Bracket is formed from...

36" Bronx straight tail set features a chrome finish with an inner diameter of 1-7/8" and comes without baffles.Extension pipes have channel mount brackets that are welded in place. Includes channel...

Drag Specialties - 78050015 - Clutch Pushrod End - Big TwinFeaturesStamped steel constructionIncludes oil slingerFor use with mechanical clutchesReplacement Part for OEM Number(s):3706990Specs

Drag Specialties - 35160199 - Tour-Pak® Lock - FL '92-'13FeaturesLock kit to be used with Tour-Pak®Replacement Part for OEM Number(s):5319407Specs

Drag Specialties - 35160192 - Tour-Pak® Hardware Latch Kit - FL '87-'13FeaturesLatch kit to be used with Tour-Pak®Self-tapping screws and blue thread locker included; these are to be used for a more...

Drag Specialties - 35160193 - Tour-Pak® Hardware Tether Kit - FL '87-'13 Features Tether kit to be used with Tour-Pak® Specs

Drag Specialties - 35160191 - Tour-Pak® Hardware Hinge Kit - FL '87-'13FeaturesHinge kit to be used with Tour-Pak®Replacement Part for OEM Number(s):5344787,8500A,9096463Specs

Drag Specialties - 35011973 - Saddlebag Support Brackets - Black - FL '97-'08FeaturesHigh-quality chrome-plated finish replacements for use on most dresser modelsSet of one left- and one right-side...

Drag Specialties - 35011250 - Saddlebag Rail - Black - FL '97-'08FeaturesKit features 7/8" diameter saddlebag guards with side rails for full saddlebag protectionIncludes all required mounting...

Drag Specialties - 35011244 - Saddlebag Support Kit - Black - FL '97-'08FeaturesSaddlebag support kit help protect leading edges of saddlebagsSpecs

Drag Specialties - 35011083 - Saddlebag Hardware with TetherFeaturesEverything needed to assemble and mount OEM-style hard saddlebags and saddlebag lidsFeatures chrome right and left latch assemblies...

Drag Specialties - 35010978 - Saddlebag and Tour-Pak® Lock KitFeaturesKit includes two saddlebag lock assemblies and one tour box lid lock assemblyLocks match so one key will open allTwo matching...

Drag Specialties - 35010865 - Replacement Saddlebag Mount KitFeaturesReplacement saddlebag mount bracket/wear plate kitReplacement Part for OEM Number(s):9095893,9096293Specs

Drag Specialties - 35010867 - Saddlebag Replacement Lock KitFeaturesReplacement chrome lock set with keysAssemble and mount OEM-style hard saddlebags and saddlebag lidsReplacement Part for OEM...

Drag Specialties - 35010864 - Saddlebag Latch - RightFeaturesReplacement latch for use with OEM-style hard saddlebagsReplacement Part for OEM Number(s):9066593Specs

Drag Specialties - 35010855 - Saddlebag Lid Gasket - ReplacementFeaturesReplacement gasket for use with OEM-style hard saddlebagsReplacement Part for OEM Number(s):9067593ASpecs

Drag Specialties - 35010863 - Saddlebag Latch - LeftFeaturesReplacement latch for use with OEM-style hard saddlebagsReplacement Part for OEM Number(s):9066493Specs

Drag Specialties - 35010853 - Replacement Saddlebag Support Cushion - 4 PackFeaturesReplacement support cushions for use with OEM-style hard saddlebagsReplacement Part for OEM Number(s):9076493Specs

Drag Specialties - 35010854 - Replacement Saddlebag Grommets - 4 PackFeaturesReplacement grommets to mount OEM-style hard saddlebagsReplacement Part for OEM Number(s):11464Specs

Drag Specialties - 35010602 - Saddlebag Support Brackets - Chrome - FL '93-'08FeaturesHigh-quality chrome-plated finish replacements for use on most dresser modelsSet of one left- and one right-side...

Drag Specialties - 24041048 - Receptacle StudFeaturesOE replacement1/4"-20 threadSpecsRiding Style<

Drag Specialties - 35010013 - Saddlebag Latch Insert - Chrome - FLT/FLH '99-'13FeaturesDie-cast aluminum constructionComes in pairs with a ball-milled design that adds to the custom touchReplaces red...

Drag Specialties - 24041047 - Speed Nut - 4-PackFeaturesOE replacementSpecsColor/FinishSilver<

Drag Specialties - 24020162 - Cover - Bolt - Deep - Hex - BlackFeaturesDesigned to fit stock-style, 3/4" front axles with 7/8" head and 1/2" hex nut (3/4" wrench size)Attach with silicone (silicone...

Drag Specialties - 24020073 - Head Bolt Covers - Chrome - 4 PackFeaturesPolished and buffed to a mirror-like finishQuality chrome plated steel bolt coversMade in the USASpecs