1999

XL control mount set features a black finish. Control mounts for right (2 bolt plate) and left (3 bolt plate) to accept Big Twin forward controls.Set is used to mount 1941-1999 Big Twin forward mount...

V-Twin - 51-0484 - XL Hardtail Axle Plate SetDescriptionRaw set of right and left axle plates for Sportster hardtails, features 7/8" slots on both sides. Fits:XL 1982-UPAdditional Information<

Kit mounts to adapt 1957-1985 Ironhead motors into 1986-2003 XL rigid frames.Ironhead motor installation kit includes front and rear mounts and hardware. Fits:XL 1957-2003Additional Information

XL rear motor mount pad is the tall type, featuring a cast steel construction. Fits:XL 1982-2003Additional Information UOM1 - EA

XL rear motor mount pad is the short type, featuring a cast steel construction. Fits:XL 1982-2003Additional Information UOM1 - EA

10" dark smoke Batwing fairing windshield. Fits:FLHT 1996-2013FLHX 1996-2013Additional Information OEM No.58303-96

7" dark smoked wind splitter windshield for the Batwing fairing is easy to install and gives the fairing a more stylish look while decreasing the wind noise. Constructed of Lexan material.NOTE: Does...

Softail top frame plate features a raw steel finish, to match with seat area plate on 1986-1999 Softail original frames.For Hardtail installation. *NOTE: Align with the (2) 1/4" holes in plates. ...

Engine bar features 1-1/4" tubing.Warning: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped, very low speed slide). It...

10" clear Batwing fairing windshield.Reduces helmet buffeting while allowing a view unobstructed by dirt, bugs and raindrops. Constructed of hardcoated polycarbonate for strength and scratch...

Fairing air deflector set with dark smoke tint reduces draft behind the fairing.Designed to deflect air away from the driver's elbow and upper torso. *NOTE: The mounting hardware must be ordered...

Beaded windshield is 21-3/4" tall and is for 1967-2010 Sidecars.Installation hardware not included, must be ordered separately. There are 5 mount holes altogether. Fits:FLT 1987-2010Additional...

Fork stem lock tab replace broken, bent or missing on stock lower triple trees, to be welded on. Fits:FLST 1987-1999Additional Information UOM1 - EA

Rear motor mount plate features a raw steel finish and is for use on custom frames. Fits:XL 1982-2003Additional Information UOM1 - EA

V-Twin - 51-0066 - Frame Motor Mount Tab RawDescriptionFrame motor mount tab must be welded on and features raw casting. Fits:XL 1982-UPAdditional Information

Rear motor mount frame plate features a raw steel finish and is for use on hardtails and custom frames. Fits:XL 1982-2003Additional Information UOM1 - EA

XL rigid frame neck is for the XL single loop rigid bobber frames. Fits:XL 1986-2003Additional Information UOM1 - EA

Rear motor mount casting features an investment cast construction and is for rigid frames. Fits:XL 1982-2003Additional Information UOM1 - EA <

V-Twin - 50-2082 - Detachable Passenger Backrest Sissy Bar ChromeDescriptionDetachable passenger backrest sissy bar features a chrome finish. Fits:FLHT 1997-2008FLHR 1997-2008FLHX 1997-2008FLTR...

V-Twin - 50-2079 - Solo Seat HandrailDescriptionSolo seat handrail features a chrome finish. Fits:FLSTS 1997-2004FLSTN 1997-2001Additional Information <

V-Twin - 50-1916 - Sissy Bar Detachable Side PlatesDescriptionGloss black side plates are detachable and can mount sissy bars with a width of 8-3/4".*NOTE: Must order hardware separately. Fits:FXDWG...

V-Twin - 50-1914 - Sissy Bar Detachable Side Plates BlackDescriptionGloss black detachable side plates for easily adding or removing detachable accessories. Fits:XL 1994-2003Additional Information

V-Twin - 50-1913 - Sissy Bar Detachable Side Plates BlackDescriptionGloss black side plates are detachable and can accept sissy bars with a width of 8-3/4".*NOTE: Must order hardware separately...

V-Twin - 50-1910 - Sissy Bar Detachable Side Plates BlackDescriptionGloss black detachable side plates for easily adding or removing detachable accessories. Fits:FXST 1984-1999FLST 1986-1999 Except...

Rear detachable docking hardware bracket set includes the left and right docking point brackets in a black finish.All necessary hardware is included. Sold as a set of 2. ...

XL Rear bobber fender features a ribbed design, constructed of black ABS plastic.*NOTE: Fender will not support a rear seat pad or sissy bar. Before priming or painting, fit the fender body, braces...

13" round sissy bar top features a black finish. Fits:XL 1994-2003Additional Information UOM1 - EA Manufacture

10" round sissy bar top features a black finish. Fits:XL 1994-2003Additional Information UOM1 - EA Manufacture

10" round sissy bar top features a chrome finish. Fits:XL 1994-2003Additional Information UOM1 - EA Manufactur

FXD rear fender is full length type and accepts stock tail lamp. Mounts to existing struts.May require additional holes for specific applications. Fits:FXD 1998-2017Additional Information

Fender tip set features a front and rear tip in a smooth style.Some drilling may be required for installation. Fits:FLSTF 1990-2006Additional Information OE

Fender tips constructed of die cast aluminum with a chrome finish. Features drilled holes for mounting, hardware included.One measure 7-1/4" x 3-1/2" x 2" and the other measures 7-1/4" x 2-3/4" x...

V-Twin - 50-1148 - Zinc Plated Fender BracketDescriptionZinc plated steel bracket used to adapt one piece FXDF front fenders to fit FLH forks on 1949-up 41mm models.Set of two. Bracket is formed from...

V-Twin - 50-1088 - Front Fender Mount Kit ChromeDescriptionChrome front fender mount kit includes acorn nuts. Kit attches fender to original style assembly. Fits:FXST 1994-UPAdditional Information

Chrome front fender mount kit attaches fender to original style assembly. Fits:FLST 1986-1999Additional Information UOM1 - KIT

Rear fender bumper without grill. Fits:FLST 1986-1999Additional Information UOM1 - EA ManufacturerV-T

Rear fender trim bumper with original cabbage cutter design grill.Rear fender trim bumper measures 14-1/8" long, 10-3/4" tall and 8-1/2" deep. Fits:FLSTC 2005-2007FLSTS 1997-2003Additional Information

V-Twin - 50-0625 - XL Rigid Tool Box KitDescriptionLeft side tool box kit is the weld on type for rigid frames on Sportster builds.*NOTE: Weld bracket to lower rigid frame hardtail tube position or...

Rear fender kit includes steel fender, Replica chrome struts , chrome license plate bracket, and tail lamp with hardware.We suggest pre fitting the fender prior to painting. ...

Chrome 8-3/4" sissy bar kit includes a 8-3/4" wide shorty sissy bar handrail and non-detachable side plates.*NOTE: Hardware not included. Fits:FXDX 2002-2005FXDX 1999-1999FXDL 1996-2005FXDXT...