1999

Axle with hex head and a threaded end has a 11-1/4" bearing surface length and can be used to replace a worn out or damaged axle. Fits:XL 1979-2002Additional Information

3/4" axle with hex head and threaded end has a 11-1/4" bearing surface length and can be used to replace a worn out or damaged axle. Fits:FLT 1980-1999FLST 1986-2006FXST 1984-2006FXR...

Axle with threaded end has a 10-5/8" bearing surface length and can be used to replace a worn out or damaged axle.For use on 41mm forks. Order nut kit separately. Fits:FXDWG 1993-2005FXST...

Kit includes chrome 11-1/2" bearing surface length axle, nuts, sleeves and spacers for belt drive applications. Fits:FXD 1991-2005Additional Information OEM No.

Bolt and nut kit with a zinc finish. Fits:XL 1982-2003Additional Information OEM No.41658-81A UOM1 -

V-Twin - 44-0091 - Swingarm Pivot Bolt Dust Shield SetDescriptionDust shield set includes 2 nuts and 2 cupped washers. Fits:XL 1982-UPAdditional Information

Axle has a threaded end with a 7-1/8" bearing surface length and is a great to dress up your existing axle or to replace a worn out or damaged axle. Fits:FXD 1991-1999XL 1988-1999FXR 1988-1994 39mm...

Axle has a threaded end with a 10-1/4" bearing surface length and is used to replace a worn or damaged axle. Fits:FLST 1986-2006FLSTF 1986-2006Additional Information

Axle has a threaded end with a 10" bearing surface length and can be used to replace a worn out or damaged axle. Fits:FXSTS 1988-2017Additional Information OEM No

Swingarm bushing set includes two of each: mount bushing rubbers, tolerance rings and retaining rings.Sold as a 6 piece set. Fits:FLT 1980-2001FXR 1983-1994Additional Information

Chrome shifter shaft cover is splined and covers the end of the shifter shaft, when forward controls are installed on FXD models. Can also be used on FLT models when heel shifter arm is removed,...

Includes end caps and has a 9-1/4" bearing surface length. A new way to dress up your front wheel without the hex nut and the lug sticking out. Fits:FLST 1986-2006Additional Information

Includes end caps and has a 9-1/2" bearing surface length. A new way to dress up your front wheel without the hex nut and the lug sticking out. Fits:FXST 1984-2006FXDWG 1991-2006Additional Information

Chrome flush mount front axle has a 6-5/8" bearing surface length includes end caps and is a new way to dress up your front wheel without the hex nut and the lug sticking out. Fits:FXD 1991-2003FXR...

Description Inner primary cover features a natural cast aluminum finish.Machined to accept stock assembly components for years listed. Fits: FLT 1994-2000 Additional Information

Alloy X shape sprocket cover for sportster has provision for brake pedal, footpeg and features an X shape design. Cover includes belt drive for 5-speed models. Fits:XL 1986-2003Additional Information

Description Transmission clutch release cover features a black finish. Fits: FLT 1986-1999 FLST 1986-1999 FXST 1986-1999 FXD 1986-1999 Additional Information <

Primary drive assembly kit includes clutch kit, chain, chrome inner and outer primary covers with all bushings, seals, spacers, gaskets, and mount screws including the starter jack shaft assembly...

5 Speed Big Twin chrome transmission side cover and top cover set. Kit comes complete with top cover and side cover and chrome allen screws. Also comes with chrome allen oil dipstick. Fits:FLT...

Inner and outer primary cover set features a chrome finish.Bare chrome covers with cosmetic imperfections. *NOTE: Must order hardware, gaskets, bushings and mount screws separately. ...

Chrome right side cam and sprocket cover set includes cam cover, sprocket cover with gasket and chrome allen screws for installation.*Note: UPS may consider this part as packaged "oversize" for...

Chrome outer primary cover kit comes with 5-hole derby gaskets.*Note: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual weight, which will result in higher...

Chrome primary set includes inner and outer primary cover.*Note: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual weight, which will result in higher shipping...

Die cast stock replacement outer cover kit comes with chrome primary cover, chrome allen screws, and outer cover starter bearing. Gaskets for the derby, inspection and outer cover are included...

Polished stainless steel windshield trim with four accent slots, includes stainless steel mounting hardware. Fits:FLH 1996-2013FLHX 1996-2013Additional Information

Chrome lower trim is formed to cover cracked or peeling decals Fits:FLHT 1996-2013FLT 1996-2013FLHX 1996-2013Additional Information OEM No.

The covers fit over stock cam cases on XL models. There is no need to remove cam case or disturb cams or gears.Covers are held in place by existing bolts and related hardware is supplied. For use on...

Chrome ignition module cover with a gold inlay Eagle Spirit design. Fits:XL 1982-2003Additional Information UOM1 - EA

Coil cover is teardrop style with chrome finish. Fits:FXST 1984-1999FLST 1986-1999FL 1965-1984FX 1971-1984Additional Information UOM

The chrome cover can be easily installed by removing the two stock bolts on the master cylinder, placing the cover over it, and reinstalling the two bolts. Fits:XL 1980-2003 RearAdditional Information

V-Twin - 42-9942 - Chrome Turn Signal Lamp VisorDescriptionTurn signal visor set features a chrome finish.Sold as a quanity 2. Fits:FLT 1986-UPAdditional Information

V-Twin - 42-9941 - Turn Signal Visor FrontDescriptionChrome front turn signal visor set Fits:FLT 1986-UPAdditional Information OE

Smooth chrome oval inspection cover for primary covers.Screws not included. Fits:FXD 1991-2005FXST 1991-2006FLST 1991-2006Additional Information

5 hole derby cover features a black finish with a chrome Eagle Spirit design. Fits:FXST 1999-2018FLT 1999-2015FXD 1999-2017FLST 1999-2018Additional Information

Saddlebag latch cover set is constructed of aluminum and features a black finish with a carbon fiber look. Fits:FLT 1993-2013Additional Information UOM1

V-Twin - 42-6055 - Maltese Ignition System Cover 5-Hole Raised ChromeDescriptionIron Cross ignition system cover is 5-hole style with chrome finish. Iron cross is raised design. Fits:FXST 1999-UPFLST...

Chrome billet 5-hole iron cross derby cover. Fits:FXST 1999-2018FLT 1999-2015FXD 1999-2017FLST 1999-2018Additional Information UOM

Chrome billet 5-hole iron cross raised derby cover.Order gasket and screws separately. Fits:FXST 1999-2018FLT 1999-2015FXD 1999-2017FLST 1999-2018Additional Information

Bone head skull coil cover. Fits:FXST 1984-1999FLST 1986-1999FL 1965-1984FX 1971-1984Additional Information UOM1 - EA

Kit includes proper cover and hold down strap. Fits:XL 1997-2003Additional Information OEM No.66476-98 UOM