2000

Wheel features 16" x 3.5" chrome rim, a chrome hub with 3/4" bearings and internals and 40 stainless spokes.Wheel is laced and trued. For use on models with a 3/4" axle. **NOTE: All...

Wheel features a 16" x 3.5" chrome rim, a chrome hub with internals and 3/4" bearings and 40 chrome spokes.Wheel is laced and trued. For use on models with a 3/4" axle. **NOTE: All spokes...

V-Twin - 52-0122 - 18 inch x 8.5 inch Rear Spoke WheelDescriptionFeatures 18" X 8.5" chrome steel rim, left side drive chrome billet hub with sealed bearings, and 60 chrome spokes, assembled.Rim...

Front 16" x 3.5" Duro 36 Fat Spoke wheel features a matte black finish and 1" bearings. Accepts dual 11" rotors.Wheel bearing adapter sleeve sets, available separately. *NOTE: The rim width is 109mm...

Rear 16" x 3.5" Duro 36 Fat Spoke wheel features a matte black finish and 25mm bearings without flanges.Wheel hub includes installed 25mm sealed bearings and has 7/16-14 pulley mount threaded hole...

16" x 3.5" Duro 36 Fat Spoke unit wheel features a matte black hub. Wheel is one piece with aluminum casting. Includes 2 spacers 18.7mm thick for disc and pulley flange. With 3/4" bearings.Wheel hub...

Front 21" x 3.15" Duro 36 Fat Spoke cast type wheel is dual disc, and features a matte black finish with 25mm bearings.Wheel bearing adapter sleeve sets, available separately. ...

21" x 2.15" Duro 36 Fat Spoke matte black wheel fits 3/4" bearings.The bearings that are included have an inner diameter of 3/4". Wheel bearing adapter sleeve sets, available separately. *NOTE: The...

200 XL rigid frame features a 40  rake with a 3" stretch. Frame can be set up for 1957-1985 type Ironhead motors.Frame will accept 1" neck cups, Wide Glide fork assembly, stock length kickstand and...

Primary Nerf plate features stainless steel finish and manufactured with cast steel. Protect the outer primary on hard lean deft turns. Bolt on type. Fits:FLST 1999-2017FXST 1999-2017Additional...

Black 13" tall sissy bar is constructed of round solid stock stock featuring the original poor boy style. One piece welded design. Fits:XL 1996-2003Additional Information

Chrome 13" tall sissy bar is constructed of round solid stock featuring the original poor boy style. One piece welded design. Fits:XL 1996-2003Additional Information

Touring torque linkage system features a black finish and will fit all Touring models with no modifications necessary to install unit.This unit will eliminate the lateral movement while still...

Touring torque linkage system features a chrome finish and will fit all Touring models with no modifications necessary to install unit.This unit will eliminate the lateral movement while still...

Nerf engine bar features a black finish and is manufactured with 1-1/2" steel tubes. Engine bar is for Touring models and can only be mounted by bolts. Engine bar will not fit Police models. Fits:FLT...

Nerf engine bar features a chrome finish and is manufactured with 1-1/2" steel tubes.Engine bar is for Touring models and can only be mounted by bolts. ...

Engine bar set features left and right sides with 1-1/4" tubing. For use with stock type saddle bag supports.2004-08 FLTR, FLHX, FLHRS models requires the separate pruchase of OEM #90781-93 Lower...

Bar complements the traditional Touring style and features 1-1/4" tubing.WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over...

V-Twin - 51-1342 - 150 Series Rear Tire Kit Description Kit includes 150 Dunlop tire, brake caliper, splash guard, wheel spacer, hardware, and tail lamp assembly.*Note: UPS may consider this part as...

Bar complements the traditional Touring style and features 1-1/2" diameter tubing.**WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances...

V-Twin - 51-1322 - Lowered Rear Axle Plate Set RawDescriptionLowered rear axle plates are threaded 3/8"-18 for fender brace sissy bar mounting. Adjusters threaded 3/8"-24 use screws for adjusters, to...

Front engine bar features a black finish.Does not fit models equipped with fairing lowers. Fits:FLT 1997-2008 except Road GlideAdditional Information UOM

Rear engine bar set with black finish. Set includes saddle bag supports, left and right guards, and hardware to replace the under the saddlebag support with loop style saddlebag guards for a...

Engine bar features 1-1/4" tubing.Includes bolts, nuts and washers. Must order clamps separately. WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique...

Chrome left and right pivot mount end caps with footpeg mount holes.The OEM number for the right end cap is 50589-93, and the OEM number for the left end cap is 50588-93. Fits:FLT 1982-1984FLT...

Chrome engine bar features integrated rubber pads for foot rests.WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while...

Chrome engine bar features integrated rubber pads for foot rests.The engine bar has a diameter of 1-5/16". **WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection...

Chrome swingarm for Softail models.Swingarm includes spherical bearings installed. Not for use on 2006-2007 FXST and 2007-up FLSTF. ...

Engine bar set features left and right sides with 1-1/4" tubing. For use with stock type saddle bag supports.2004-08 FLTR, FLHX, FLHRS models requires the seperate purchase of OEM #90781-93 Lower...

Rear frame set bar features left and right sides with 7/8" tubing.The stock shape reflectors are not included. *NOTE: Not for use with saddlebag rails. **WARNING: This frame bar may provide limited...

Engine bar features 1-1/4" tubing and foot rests with rubber pads. Hardware is not included. This will not work with forward controls.**WARNING: This engine/frame bar may provide limited leg and...

Engine bar features 1-1/4" tubing.Not for use with forward controls. WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection...

Engine bar features 1-1/4" tubing and single top mount hole.Includes U-bolts, nuts, and straight bolt. The width between bottom mount plates measures 12" outside to outside. The height from the top...

Bar complements the traditional Touring style and features 1-1/4" tubing.WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over...

Chrome frame guard set includes left and right side with 7/8" tubing.*NOTE: Mounting hardware is not included, must be supplied by the installer. WARNING: This engine/frame bar may provide limited...

Black engine bar features integrated rubber pads for foot rests.WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while...

Engine bar features a gloss black finish and integrated rubber pads for foot rests.Hardware is not included. The engine bar has a diameter of 1-5/16". **WARNING: This engine/frame bar may provide...

Passenger footboard set with swingarm mount kit includes streamline style mini footboards.A Wyatt Gatling patch is included in the kit. Installation will require re-installation of the original...

Chrome swingarm mount kit includes right & left side chrome pivot caps, passenger footboard mounts and passenger footboard with rubber pads.Installation will require re-installation of the original...

Chrome rear frame bar set. Top of the bar is angled downward to allow for more passenger leg room.*WARNING: This frame bar may provide limited leg and cosmetic vehicle protection under unique...