2001

V-Twin - 32-2061 - Turn Signal CancelerDescriptionTurn signal canceler automatically shuts off turn signal if left on. Fits:FLT 2001-2006FXD 2001-2006Additional Information

V-Twin - 32-2046 - V-Fire Starter Button Wrinkle BlackDescriptionV-Fire starter button features a wrinkle black finish with extended knob. Starter button is a press start to engage starter. Mounts as...

V-Twin - 32-1916 - Stick Starter LeverDescriptionStick starter lever. Fits:FXST 1989-UPXL 1991-UPFLST 1989-UPAdditional Information

V-Twin - 32-1913 - Single Fire IgnitionDescriptionSingle fire ignition fires the front and rear cylinders independently of each other, which allows accurate timing of each cylinder.Stock ignition...

V-Twin - 32-1908 - Battery Cable Set BlackDescriptionFour gauge battery cable set features a black finish with tinned copper strands.Sold as a set of 3 cables. Includes extra red shrink tubing and...

V-Twin - 32-1907 - Battery Cable Set BlackDescriptionFour gauge battery cable set features a black finish with tinned copper strands.Sold as a set of 3 cables. Includes extra red shrink tubing and...

V-Twin - 32-1906 - Battery Cable Set BlackDescriptionFour gauge battery cable set features a black finish with tinned copper strands.Sold as a set of 3 cables. Includes extra red shrink tubing and...

Four gauge battery cable set features a black finish with tinned copper strands.Sold as a set of 2 cables. Includes extra red shrink tubing and features 1/4" and 5/16" terminals. Fits:XL...

Four gauge battery cable set features a black finish with tinned copper strands.Sold as a set of 2 cables. Includes extra red shrink tubing and features 1/4" and 5/16" terminals. Fits:FLST...

V-Twin - 32-1830 - Stick Starter Lever Base ZincDescriptionStick starter lever base one design is zinc plated. Fits:FXST 1989-UPXL 1991-UPFLST 1989-UPAdditional Information

V-Fire single fire ignition kit includes a V-Fire single fire ignition kit with a chrome 12 volt coil.Mounts to stock bracket and accepts stock type coil covers. Works with most aftermarket single...

3D ignition switch with a barrel style key set. Fits:FXST 1996-2013FLT 1996-2013FXDWG 1996-2011FXE 2006-2011FXDF 2008-2011FLST 1996-2013Additional Information

V-Fire dual fire ignition kit includes a V-Fire dual fire ignition kit with a black 12 volt coil.Includes a mechanical advance unit and all hardware. *NOTE: Dual fire is where there are two sparks at...

Volt Fire single fire coil for fuel injected models.Original stock ignition coil is 25,000 volts, replica ignition coils feature a 10% increase at 27,500 volts. Fits:FLT 1999-2001Additional...

V-Twin - 32-0944 - Tail Lamp Wiring Connector 5-PinDescriptionTail lamp wiring connector includes wire harness to be spliced to replacement. Wiring connector is 5-pin, amp style.This is a female end...

Turn signal canceler automatically shuts off turn signal if left on. Fits:FLST 1996-2000FXD 1996-2000XL 1996-2003FLT 1996-2000FXST 1996-2000Additional Information

EFI idle air control motor. Fits:FLST 2001-2005FLT 2001-2005VRSC 2003-2009XL 2007-2008FXST 2001-2005Additional Information OEM

V-Twin - 32-0490 - Deutsch Wiring Connector Starter RelayDescriptionDeutsch wiring connector starter relay includes wire harness to be spliced for replacement. Fits:FXD 1996-2017FXST 1996-UPFLT...

V-Twin - 32-0487 - Headlamp Wiring Deutsch ConnectorDescriptionDeutsch wiring connector for headlamp includes wire harness to be spliced to replacement. Fits:FXST 1996-UPFLST 1996-UPAdditional...

V-Twin - 32-0486 - Tail Lamp Wiring PVC CoveredDescriptionTail lamp wires with PVC covering for Softail models.Includes 7 wires. Fits:FXST 1996-UPFLST 1996-UPAdditional Information

V-Fire ignition kit is single fire and includes mechanical advance unit, hardware, and wiring instructions.Black wire is for the front and the white wire is for the rear. Order coil separately...

V-Fire dual fire ignition kit includes a mechanical advance unit and all hardware.Ignition kit is dual fire where there are two sparks at the same time. Critical wiring instructions are included...

Ignition switch housing. Fits:FLTCU 1993-2002FLHTC 1993-2002FLHTCU 1993-2002FLTR 1998-2002FLHT 1993-2002FLHS 1993-2002Additional Information

Replica hydraulic brake switch with flag features heavy duty contact and quality brass terminals. This will retro fit to earlier models. Fits:FXST 1984-2003FXD 1991-2003XL 1984-2003FLST 1986-2003FLT...

Battery cable boot fits cable end at battery terminal. Fits:FXD 1995-2005Additional Information OEM No.70595-96

Battery cable for ground on FXST, FLST and positive on FXR.PVC plastic coated cable replaces original with heat shielded terminal ends. Fits:FXR 1993-1994FLST 1989-2007FXST 1989-2007Additional...

V-Twin - 31-9974 - 9 inch Chrome Rear Turn Signal MountDescriptionChrome 9" rear mount bar for FL and FLST models. Thread pitch is 1/4"-20.Rear turn signal mount measures 6-7/8" center to center...

V-Twin - 31-9935 - Front Turn Signal Relocation KitDescriptionChrome front relocation kit will move turn signals to post mounted to top of triple tree. Chrome mount posts, wiring and hardware,...

V-Twin - 31-9929 - 10 inch Chrome Turn Signal Mount RearDescriptionChrome 10" rear mount bar.The distance across the holes center to center measures 5-7/8". Fits:FLHTC 2009-2013FL 1974-1984FLHR...

V-Twin - 31-9924 - Chrome Saddlebag Support SetDescriptionChrome saddlebag support set is designed to fit the contour of the fender struts and protect your bags from brake caliper and swingarm...

V-Twin - 31-9922 - Chrome 8-1/4 inch Turn Signal Mount Bar RearDescriptionChrome 8-1/4" rear mount bar is cast construction.The distance across the holes center to center measures 6-7/8". Fits:FLHTC...

V-Twin - 31-9915 - Chrome Spotlamp Bracket KitDescriptionBracket kit chrome mounts to lower pinch bolts for spotlamp. Fits:FXST 1984-UPFX 1980-1984Additional Information

Solo mount kit includes 'T' bracket, seat, 2" chrome springs and strut bars for rigid mount. Accepts all police size solos.Cover not included, order separately. If using this mount kit on buddy size...

Chrome passenger footpeg relocation bracket places pegs in a more comfortable position.Bracket measures 1-1/4" wide with a thickness of 1/4". Holes are 7/16" in diameter. The distance between the...

V-Twin - 31-4072 - Turn Signal Front SupportDescriptionSupport for the turn signal on the front of a XL models. Fits:XL 1988-UPFXDS 1994-2000FXR 1988-1994Additional Information

V-Twin - 31-4067 - Front Turn Signal Ball StudDescriptionBall stud set is for front turn signal.Sold in a quantity of 2. Fits:XL 1988-UPFXD 1991-2017FXR 1988-1994Additional Information

Chrome front mount bracket is used with black front mount. Is a stock OE replacement. Fits:FLT 1979-2008Additional Information OEM No.47159-79A

Solo seat hardware mount kit includes nose brackets, springs and rear bracketsRequires the purchase of a cross bar to fit police style solos. On the support plate the length between stud to stud...

V-Twin - 31-4028 - Bates Headlamp Mounting Block ChromeDescriptionBates short mounting block for mounting headlamp. The threaded mount hole is 3/8"-24 for mounting to the triple tree. The hole for...

Chrome bracket for 12 volt spotlamp.The distance between the mounting holes, center to center, measures 7-1/2". ...