2002

Kit includes set of black saddlebag adapter brackets for quick release mounting, four bail head studs, four receptacles, four cushions, four grommets, and mounting hardware for the left and right...

Deep style raw plastic hinged saddlebag bottom set only. Saddlebag bottoms have a 3" stretch and are notched for muffler body on the under side.This saddlebag set is a perfect fit and has all...

Tour-Pak luggage plastic case top is for FLT models.Order bottom, hardware, and gaskets separately. Pre-drilled and pre-fit for ease of installation. Ready for your custom finish! The process of...

Tour-Pak luggage case with plastic bottom is for FLT models.Pre-drilled and pre-fit for ease of installation. Ready for your custom finish! The process of injection created smooth inside and outside...

Black saddlebag rail. Fits: FLT 1997-2008 Additional Information UOM 1 - EA Manufacturer

Chrome saddlebag guard kit comes with saddlebag guards, right and left chrome rail set and mount brackets.Rear frame guard is sold separately. Fits: FLHT 1997-2008 FLHR 1997-2008 Additional...

Rear spring fork legs only features a chrome finish and is for use on FXST models.Fork stem is oxidized due to the plating process. *NOTE: Spring fork are measured from lower triple tree to axle...

FXSTS Spring Fork assembly is stock length and features an all chrome finish.Assembly includes shocks, axle riser, top tree, brake arm, rockers and bearings all assembled. For use with 21" wheel...

Black heavy duty construction is 15% thicker than stock for added support to prevent breakage.Mounts with stock hardware. ...

Tour-Pak hinge kit. Fits:FLT 1987-2013Additional Information UOM1 - KIT ManufacturerV-Twin

Tour-pak latch kit. Fits:FLTRU 1987-2013FLT 1987-2013FLHT 1987-2013Additional Information UOM1 - KIT

V-Twin - 49-1283 - Tour-Pak Tether Cable KitDescriptionTour-Pak tether cable kit. Fits:FLT 1991-UPAdditional Information UOM

Saddlebag hardware kit includes small clips, hinges, face plates, and key-lock set for both bags.All saddlebags and lids are constructed of FRP, fiberglass reinforced plastic, readyy for primer and...

V-Twin - 49-1170 - Spring Fork Bridge Top Plate Rod Support BrassDescriptionSpring Fork top plate rod support features a brass construction. Fits:FLSTS 1988-UPFXSTS 1988-UPAdditional Information

Saddlebag latch cover set features chrome face plates with black flame design inserts. Fits:FLT 1993-2013Additional Information OEM No.90690-04A

Saddlebag lock and key kit features a chrome finish. Fits:FLTR 1993-2013FLHR 1993-2013FLHTC 1993-2013FLHT 1993-2013FLHX 1993-2013Additional Information

Saddle bag lock and key kit includes 2 keys and 2 locks.All saddlebags and lids are constructed of FRP, reinforced plastic, readyy for primer and paint. FRP is made up of polyphenylene...

Saddlebag hardware kit includes all necessary tethers, hardware, seals, and hinges.*NOTE: Must order locks and face plates separately. Comprehensive saddlebag lid latch kits are great for aftermarket...

V-Twin - 49-0887 - Saddlebag Top StrapsDescriptionTop straps for saddlebag. Includes 8 screws.Includes qty 4 pieces 12-16x5/8" self tapping screws (OEM #3596) and 4 pieces 8-32x1/2" stainless truss...

V-Twin - 49-0886 - Saddlebag Lid Wear PlatesDescriptionStainless steel wear plates are for the saddlebag lid. Plates come in a set of four, and require installation with adhesive. Fits:FLT...

V-Twin - 49-0885 - Saddlebag Reinforcing Lid Back Plate SetDescriptionNew Old Stock" Stainless steel reinforcing back plates are for the saddlebag lid latch. Plates come in a two piece set.*NOTE: No...

Chrome face plate set is for the right and left sides of the saddlebag latch with indent.Reflector set not included. Plate set is OE style die cast and chrome. They will accept reflector set or flame...

V-Twin - 49-0882 - Original Style Saddlebag Latch SetDescriptionSet includes four plastic rub bars installed and right and left side latches for saddlebag.Order screws and hardware separately...

Set includes four bail head studs, four washers, four grommets, four receptacles, and four mounts for the left and right side for mounting saddlebags.Does not include the lid hardware or latch plates...

Chrome spring fork rocker set includes right and left sides for use on 16" wheels. Fits:FLSTS 1997-2007Additional Information OEM No.46216-05

Chrome face plate set is for the right and left sides of the saddlebag latch with indent and includes an OE replacement reflector set.. Fits:FLT 1993-2013Additional Information

Hardware kit is for the saddlebag lids.Hardware lid kit does not include locks or face plates. Fits:FLT 1993-2013Additional Information OEM No.9092

Chrome heavy duty construction is 15% thicker than stock steel brackets for added support to prevent breakage. Constructed of forged aluminum, machined, and full chrome plated pieces.Mounts with...

Black spring fork rocker set includes right and left sides for use on 16" wheels. Fits:FLSTS 1997-2005Additional Information UOM1 - SET

Front trim style speaker grill set features a chrome finish with a cross bar design.Sold as a set of 2. Fits:FLT 1996-2013Additional Information UOM

Saddle bag lock and key kit includes 2 key and 2 locks.Kit includes 2 x 90682-93 Cam Hooks and 2 x 7586 Jam Nuts 9/32-28 x 1/4. Fits:FLT 1993-2013FLHT 1993-2013Additional Information

Saddlebag Lock and key kit includes 2 locks and 2 keys, 2 cam hooks, 2 9/32 x 28 x 1/4 jam nuts, 2 8# x 32 x 3/8 screws, and right and left side plastic rub bars. Each lock is keyed different.All...

Saddlebag liner kit for stretched saddlebags features felt material.Customer may opt to use velcro strips to better secure liners inside of saddlebags. (Velcro not included.) Fits:FLT...

Chrome heavy duty construction is reinforced and 15% thicker than stock for added support to prevent breakage.Mounts with reinforced stock hardware. Fits:FLT 1979-2013Additional Information

Chrome front spring fork leg is for FLSTS models. Fits:FLSTS 1997-2008Additional Information OEM No.45619-97 U

Saddlebag lid set includes right and left side lids with speaker cutout. Lids are plastic with a primed finish, ready for paint.The speaker cutout measures 7.5" x 5-1/4". Pre-drilled and pre-fit for...

V-Twin - 49-0462 - Saddlebag BracketDescriptionThis bracket connects the saddlebags and attaches to the license plate bracket. Fits:FXST 1986-UPAdditional Information

Saddlebag hardware set includes saddlebag backing plate set, stud and hardware kit, top straps, two saddlebag gaskets, and four lower rubber bumpers.Hardware set does not include locks or latch set. ...

Saddlebag hardware kit with left and right latch assembly set, includes bail head studs.Kit includes Touring pack hardware, OE saddlebag hardware, saddlebag lid wear plates, reinforcing lid back...

V-Twin - 49-0000 - Saddlebag LED Lamp KitDescriptionSaddlebag lamp kit includes a set of red LED lamps with red lens and the Touring electrical connection update kit.Harness included. *NOTE: Does not...