2002

CV carburetor float for 40mm CV carburetors. Fits:FXST 1992-2006FXR 1992-1994FLST 1992-2006XL 1992-2006FXD 1992-2006FLT 1992-2006Additional Information

Intake manifold is of cast alloy and spigot type. Fits:XL 1988-2003 EvolutionAdditional Information OEM No.27004-88A

Intake manifold coupler clamp set. Fits:FLT 1986-1999FXD 1991-1999FLST 1986-1999XL 1988-2006FXR 1986-1994FXST 1986-1999Additional Information

CV carburetor main jet assortment for the Kinetic-Karb tuner kit includes 5 of each jet from 1.40-2.05 in increments of .05.Jets are for use in stock CV carburetors or in combination with the...

Kinetic-Karb CV carburetor tuner kit is for Keihin constant velocity carburetors to permit easy tuning after installation of custom air cleaners, cams, and exhaust for cabureted models.Carburetor...

Intake manifold for Evolution models converts stock rubber compliance fittings to a more rigid mount system. Manifold will accept S&S CV or other aftermarket carburetor.Manifold is for use with 883cc...

Chrome intake manifold flange set. Fits:FLT 1986-1999FXD 1991-1999FLST 1986-1999XL 1988-2006FXR 1986-1994FXST 1986-1999Additional Information

Replacement fuel line which fits from the pump to the filter on models with fuel injection. Fits:FXST 2001-2007FLHT 2000-2007FLST 2001-2007FLHR 2000-2007Additional Information

Replacement fuel filter kit is OEM style and fits late model Big Twins. Fits:FLHT 2002-2007FLT 2002-2007FLST 2002-2007FLHR 2002-2007FXST 2002-2007Additional Information

A complete jet tuner kit that includes all necessary needles, slow jets, and main jets to make your CV carburetor run perfectly.Kit contains redesigned Emulsion tube, a #5 MAHR needle, main jets 170,...

Breather bracket features an alloy finish. Bracket does not include any breather bolts or seals. Fits:FLT 2002-2006FXST 2002-2006FXD 2002-2006FLST 2002-2006Additional Information

Alloy OKO performance 1-7/8" shorty carburetor kit includes the choke cable bracket, an alloy intake manifold and air cleaner. The accelerator pump nozzle is relocated for increased throttle response...

V-Twin - 35-3008 - Anderson Twist Grip Assembly ChromeDescriptionDual cable type Anderson twist grip assembly with a black rubber grip set. Includes a die cast housing and billet throttle tube with a...

V-Twin - 35-3005 - Anderson Twist Grip Assembly BlackDescriptionDual cable type Anderson twist grip assembly with a black rubber grip set. Includes a die cast housing and billet throttle tube with a...

Stainless CV idle adjustment screw with a brass knurled knob. Fits:FX 1993-2006XL 1988-2006Additional Information UOM1 - EA

XL 47mm OKO shorty carburetor kit includes Tourist Trophy old style air snoot. Kit does not include filter. Fits:XL 1986-2006Additional Information UOM1

Throttle shaft arm is for use on EFI module throttle shaft.Shaft must be positioned and pressed in place. Fits:FLHT 2002-2005FLT 2002-2005Additional Information

V-Twin - 35-2001 - Linkert Carburetor Float BowlDescriptionLinkert carburetor float bowl fits 1936-up Big Twin overhead valve models. Fits:FL 1936-UPEL 1936-UPE 1936-UPAdditional Information

OKO 45mm flat side carburetor kit includes the carburetor, manifold, flange kit and chrome bracket.Twist grip and cables available separately. Fits:FLT 1999-2016FXD 1991-2017FLST 1999-2017FXST...

V-Twin - 35-1881 - 40mm CV Carburetor BlackDescription40mm CV carburetor features a black finish and includes brass fuel fitting and dual cable bracket.Includes 1.6 main jet and 0.42 slow jet. ...

OKO 45mm flat side carburetor kit includes carburetor, breather bracket, and bolts for Evolution models.Uses stock choke cable included. Accepts CV air cleaner, not included. Redesigned with a...

OKO 42mm carburetor kit is the flatslide style and includes the manifold, adapter flange, rubber seal and carburetor mount bracket.Mounts to existing 2 hole manifold. Includes breather bolts for the...

V-Twin - 35-1789 - EFI Throttle ShaftDescriptionEFI throttle shaft. Fits:FLT 2001-UPAdditional Information UOM1 - EA

CV carburetor adapter kit includes 2 bolt flange, seal ring and mounting bracket with choke bracket. Will mount to stock intake manifold.Accepts OEM and replacement CV carburetor. Place carburetor...

V-Twin - 35-1724 - CV Carburetor Manifold AdapterDescriptionCV carburetor manifold adapter accepts original 40mm CV intake manifold seals. Adapter features a natural aluminum finish.*NOTE: The...

47mm alloy OKO performance 1-7/8" shorty carburetor kit includes the choke cable bracket, an alloy intake manifold and air cleaner. The accelerator pump nozzle is relocated for increased throttle...

Kit includes a chrome billet carburetor bracket kit, which features an integral breather passage to air intake, and a 1-7/8" alloy finish OKO performance shorty carburetor.Integral carburetor support...

V-Twin - 35-1676 - 1/2 inch Breather Bolt SetDescriptionZinc 1/2" breather bolt set for breather brackets.Sold in a quantity of 2. Fits:XL 1991-UPAdditional Information

40mm CV carburetor kit includes a 40mm CV carburetor, manifold, manifold flange kit and support bracket with the integral breather.The manifold does not have provisions for map sensor or other...

Black CV carburetor top with choke bracket built in. Fits:FX 1993-2006XL 1988-2006Additional Information UOM1 - EA

OKO performance 1-7/8" shorty carburetor kit includes a chrome billet carburetor bracket kit, which features an integral breather passage to air intake, and a 1-7/8" alloy finish OKO performance...

Vacuum operated fuel tank petcock valve is for use as fuel shut off to carburetors. The body features a black finish with a zinc plated lever and cover plate. Hex nut and screw not included.*NOTE:...

Kit includes a chrome billet air cleaner bracket kit, which features an intergral breather passage to air intake, and a 1-7/8" alloy finish OKO performance shorty carburetor.Integral carburetor...

Sifton fuel pressure regulator housing body is constructed of billet material, serving as a replacement for the original plastic factory part. Fits:FXST 2001-2007FLST 2001-2007Additional Information

CV carburetor mount with choke cable bracket features a stainless steel finish.For Evolution and TC applications. Order breather bolts separately. Fits:FLST 1993-2007FXST 1993-2007Additional...

CV carburetor choke cable kit features cable with knob, mount bracket, screws and hardware. Fits:FX 1993-2006XL 1988-2006Additional Information UOM<

Complete 1-7/8" OKO shorty carburetor kit includes complete alloy finish carburetor assembly with flanges, alloy manifold, carburetor bracket with integral breather and open carburetor snoot. The...

40mm Sportster CV carburetor kit includes a 40mm CV carburetor with a natural finish, manifold and sealing flanges.. Fits:XL 1988-2003Additional Information

Idle control adjustment screw for EFI models.Idle adjustment screw replaces the IAC activator and allows idle speed to be controlled by adjusting screw. Fits:FXST 2000-2005FXD 2003-2005FLST...

V-Twin - 35-1289 - XL Breather Spacer Set .5 inchDescriptionZinc plated EFI carburetor spacer set is .50" long and is for use with the integral breather/carburetor mount bracket.For S&S and OKO...