2006

James Gasket - Primary Cover Gasket fits '99-'06 FLT Model (OEM #34901-94) Features: Top quality gaskets, seals and O-rings meet or exceed OEM specifications Primary gasket features silicone...

James Gasket - Primary Cover Gasket fits '00-'06 Softail, '99-'05 Dyna Models (OEM #60539-94) Features: Top quality gaskets, seals and O-rings meet or exceed OEM specifications Primary gasket...

James Gaskets - 17053-05-MLS - Motor Gasket Kit - Fits '05-'17 Twin Cam 88”/96” Models (0.040” Head Gaskets) Fits: '05-'17 Twin Cam 88”/96” Models (0.040” Head Gaskets). Full year/model list is on...

James Gaskets - JGI-17055-05-X - Motor Gasket Kit - Fits '05-'17 Twin Cam 95”/​103” Models (0.036” Head Gaskets) Fits: '05-'17 Twin Cam 95”/​103” Models (0.036” Head Gaskets). Full year/model list is...

James Gaskets - JGI-17052-05 - Top End Gasket Kit - Fits '05-'06 Twin Cam 88” Models (0.046” Head Gaskets Fits: '05-'06 Twin Cam 88” Models (0.046” Head Gaskets. Full year/model list is on the...

James Gaskets - JGI-17052-05-X - Top End Gasket Kit - Fits '05-'06 Twin Cam 95” Models (0.046” Head Gaskets Fits: '05-'06 Twin Cam 95” Models (0.046” Head Gaskets. Full year/model list is on the...

James Gaskets - JGI-17053-05-X - Motor Gasket Kit - Fits '05-'17 Twin Cam 88”/96” Models (0.036” Head Gasket Fits: '05-'17 Twin Cam 88”/96” Models (0.036” Head Gasket. Full year/model list is on the...

James Gasket - Top End Gasket MLS Kit fits '05-'06 Twin Cam 95” Models (w/ MLS Head Gaskets (OEM #17054-05)) Features: Top-quality gaskets, oil seals and O-rings necessary to rebuild an...

James Gaskets - JGI-17054-05-X - Top End Gasket Kit - Fits '05-'17 Twin Cam 95”/​103” Models (0.036” Head Gaskets Fits: '05-'17 Twin Cam 95”/​103” Models (0.036” Head Gaskets. Full year/model list is...

James Gaskets - JGI-17055-05 - Motor Gasket Kit - Fits '05-'06 Twin Cam 95”/​103” Models (0.046” Head Gaskets Fits: '05-'06 Twin Cam 95”/​103” Models (0.046” Head Gaskets. Full year/model list is on...

James Gaskets - JGI-17054-05 - Top End Gasket Kit - Fits '05-'17 Twin Cam 88”/96” Models (0.036” Head Gaskets, Metal w/ Silicone Rocker Gaskets Fits: '05-'17 Twin Cam 88”/96” Models (0.036” Head...

James Gaskets - JGI-25263-04-KX - Cam Cover Gasket Kit - Fits '04-'22 Sportster Models (Except RH Sportster) Fits: '04-'22 Sportster Models (Except RH Sportster). Full year/model list is on the...

James Gaskets - JGI-11377-K - Pushrod O-Ring Kit - Fits '04-'22 Sportster/​XR1200 Models (Except RH Sportster) Fits: '04-'22 Sportster/​XR1200 Models (Except RH Sportster). Full year/model list is on...

James Gaskets - JGI-60547-06-KF - Primary Cover Gasket Kit - Fits '06-'17 FXD, '07-'17 FXST/​FLST Models Fits: '06-'17 FXD, '07-'17 FXST/​FLST Models. Full year/model list is on the Fitment tab...

James Gaskets - JGI-17049-04-X - Top End Gasket Kit - Fits '04-'06 Sportster Models (Metal Base and Rocker Gaskets Fits: '04-'06 Sportster Models (Metal Base and Rocker Gaskets. Full year/model list...

James Gaskets - JGI-17047-04-X - Complete Motor Gasket Kit - Fits '04-'06 Sportster Models (Includes 0.045” Head Gaskets Fits: '04-'06 Sportster Models (Includes 0.045” Head Gaskets. Full year/model...

James Gaskets - JGI-17033-99 - Rocker Cover Gasket Kit - Fits '99-'17 Twin Cam Models Fits: '99-'17 Twin Cam Models. Full year/model list is on the Fitment tab. Rocker Cover Gasket Kit from James...

James Gaskets - JGI-27002-00 - 44 mm Carburetor Intake Manifold Seal Kit - Fits '99-'06 Twin Cam & '88-'06 Sportster Models Fits: '99-'06 Twin Cam & '88-'06 Sportster Models. Full year/model list is...

Jims - 1733 Mega Nut fits '07-'20 Big Twin & '06-'17 Dyna Models Features: Includes machined clamping face tolerance, along with additional locking holes for a more precise and secure way to...

Jims - 943 Ignition Switch Alignment Tool fits '03-'13 Touring & '02-'10 V-Rod Models Features: Also used to position switch in the correct orientation for properly activating the fork lock

Jims - 942 Ignition Switch Connector Tool fits '03-'13 Touring & '02-'10 V-Rod Models Features: Slip the dog bone end of tool into the bottom side of connector until it is touching the back end...

Jims - 778 Ignition Lock Tool fits '06-'17 Dyna Models Features: Locates on ignition switch face nut that holds switch in place to remove or install switch without damage 3/8" drive access

Jims - 981 Cruise Drive/6-Speed Main Drive Gear Tool fits '07-'17 Twin Cam & '06 Dyna Models Features: Holds the main drive gear square to its bearing bore, eliminating any marring of gear or...

Jims - 986 Cruise Drive/6-Speed Main Drive Gear Bearing/Seal Installer Tool fits '07-'20 Big Twin & '06 Dyna Models Features: Holds bearings and seal square to its bore, eliminating any marring

Jims - 987 Cruise Drive/6-Speed Main Bearing Installer Tool fits '07-'20 Big Twin & '06 Dyna Models Features: Safely installs new main transmission case bearing; does not remove bearing

Jims - 984 Transmission Door Puller fits '07-'17 Big Twin & '06 Dyna Models Features: Removes transmission door with gears and shaft attached Made in the USA

Jims - 989 Main Drive Gear Sprocket Locknut Wrench fits '07-'21 Big Twin & '06 Dyna Models Features: Removes hex nut from end of main drive gear that secures the rear drive transmission pulley

Jims - Shifter Shaft Removal Tool fits '07-'20 Big Twin & '06 Dyna Models Features: Loosens and removes both shifter shafts from transmission door, allowing further disassembly of transmission

Jims - 939 Sealed Wheel Bearing Tool fits '00-'17 Twin Cam, '00-'22 Sportster & '02-'17 V-ROD Models Features: Removes and installs 3/4", 1" and 25 mm wheel bearing with or without Anti-Locking...

Jims - 901 Cruise Drive/6-Speed Main Drive Gear Remover Tool fits '07-'20 Big Twin & '06 Dyna Models Features: Removes the main drive gear from the main bearing correctly while in the...

Jims - 911 Cruise Drive/6-Speed Trap Door Bearing Remover/Installer fits '07-'20 Big Twin & '06 Dyna Models Features: Accurately installs and removes lubed ball bearing into transmissio

Jims - 767 6-Speed Transmission Case Shifter Shaft Seal Installer fits '06-'20 Big Twin & '84-'05 Sportster Models Features: Makes installing shifter shaft seal precise and effortless

Jims - 768 5-Speed Transmission Case Shifter Shaft Seal Installer fits '80-'99 Big Twin, '99 Twin Cam, '99-'06 FXST & '99-'05 FLT/F LHT/​FXD Models Features:

Jims - 1658 Transmission Shifter Shaft Sleeve Tool fits '06-'20 6-Speed H-D Cruise Drive Models Features: Can be used to remove, install replacement or upgrade shifter shaft sleeve, assembl

Jims - 739 5 & 6-Speed Cruise Drive Countershaft Bearing Remover/Installer Tool Features: Install or remove the closed-end countershaft bearing on all 5-speed or 6-speed transmissions without...

Jims - 729 Inner Primary Seal/Bearing Removal/Installation Tool fits '85-'20 Big Twin Models Features: Gives a much better feel than a press while eliminating the possibility of applying too much...

Jims - 967-4 Installation/Removal Inner Primary Bearing Tool fits '07-'20 Big Twin & '06 Dyna Models Features: Safely removes and installs inner primary bearing without any damage to new bearing...

Jims - 967-5 Inner Primary Bearing Tool fits '07-'19 Big Twin & '06 Dyna Models Features: Safely removes and installs inner primary bearing without any damage to new bearing by pushing on outer...

Jims - 2268 Main Case Seal Installer Tool fits '85-'06 5-Speed Big Twin & Aftermarket 6-Speeds Models Features: Ensures correct alignment, seal protection and depth when installing the seal

Jims - 5502 Ultimate Clutch Adjusting Tool fits '85-'20 Big Twins Models w/ Mechanical Clutch Features: Allows the quick and accurate tightening of the clutch adjusting screw jam nut withou