Touring Electra Glide Ultra Classic FLHTCU

Bar complements the traditional Touring style and features 1-1/4" tubing.WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over...

Bar complements the traditional Touring style and features 1-1/2" diameter tubing.**WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances...

Front engine bar features a black finish.Does not fit models equipped with fairing lowers. Fits:FLT 1997-2008 except Road GlideAdditional Information UOM

Rear engine bar set with black finish. Set includes saddle bag supports, left and right guards, and hardware to replace the under the saddlebag support with loop style saddlebag guards for a...

Chrome swingarm mount kit includes right and left side chrome pivot caps, passenger footboards mount and passenger footboard with rubber pads.Installation will require re-installation of the original...

Rear frame fork bracket set has a chrome finish and includes both the left and right side bracket. Brackets have peg mount holes.Sold as a pair. Fits:FLT 2007-2008Additional Information

Chrome engine bar features integrated rubber pads for foot rests.WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while...

Engine bar set features left and right sides with 1-1/4" tubing. For use with stock type saddle bag supports.2004-08 FLTR, FLHX, FLHRS models requires the seperate purchase of OEM #90781-93 Lower...

Rear frame set bar features left and right sides with 7/8" tubing.The stock shape reflectors are not included. *NOTE: Not for use with saddlebag rails. **WARNING: This frame bar may provide limited...

Bar complements the traditional Touring style and features 1-1/4" tubing.WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over...

Black engine bar features integrated rubber pads for foot rests.WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while...

Chrome rear frame bar set. Top of the bar is angled downward to allow for more passenger leg room.*WARNING: This frame bar may provide limited leg and cosmetic vehicle protection under unique...

Profile frame bar set features left and right sides with 7/8" chrome plated tubing. For use with stock type saddlebag supports.The unique shape of these guards gives the passenger more leg room. Not...

Fairing outer shell is made from fiber reinforced plastic. This shell includes brass inserts to accept screws to mount to the inner fairing.This outer shell allows use of the stock hardware. ...

Mid control mount kit is used to mount to the two holes located in the lower frame brace. Kit features a black finish.Mount features holes on each side for the left and right foot brake peg mount...

10" dark smoke Batwing fairing windshield. Fits:FLHT 1996-2013FLHX 1996-2013Additional Information OEM No.58303-96

7" dark smoked wind splitter windshield for the Batwing fairing is easy to install and gives the fairing a more stylish look while decreasing the wind noise. Constructed of Lexan material.NOTE: Does...

10" clear Batwing fairing windshield.Reduces helmet buffeting while allowing a view unobstructed by dirt, bugs and raindrops. Constructed of hardcoated polycarbonate for strength and scratch...

Fairing air deflector set with dark smoke tint reduces draft behind the fairing.Designed to deflect air away from the driver's elbow and upper torso. *NOTE: The mounting hardware must be ordered...

Beaded windshield is 21-3/4" tall and is for 1967-2010 Sidecars.Installation hardware not included, must be ordered separately. There are 5 mount holes altogether. Fits:FLT 1987-2010Additional...

V-Twin - 50-2082 - Detachable Passenger Backrest Sissy Bar ChromeDescriptionDetachable passenger backrest sissy bar features a chrome finish. Fits:FLHT 1997-2008FLHR 1997-2008FLHX 1997-2008FLTR...

Rear detachable docking hardware bracket set includes the left and right docking point brackets in a black finish.All necessary hardware is included. Sold as a set of 2. ...

V-Twin - 50-1258 - Black Fork Mount Wind Deflector SetDescriptionBlack fork mount wind deflectors extends the windshield's coverage for superior protection in any weather.Scooped deflectors are...

V-Twin - 50-1257 - Chrome Fork Mount Wind Deflector SetDescriptionChrome fork mount wind deflectors extends the windshield's coverage for superior protection in any weather.Scooped deflectors are...

V-Twin - 50-1148 - Zinc Plated Fender BracketDescriptionZinc plated steel bracket used to adapt one piece FXDF front fenders to fit FLH forks on 1949-up 41mm models.Set of two. Bracket is formed from...

36" Bronx straight tail set features a chrome finish with an inner diameter of 1-7/8" and comes without baffles.Extension pipes have channel mount brackets that are welded in place. Includes channel...

Drag Specialties - 78055054 - Replacement Taillight LensFeaturesTop-quality replacement lenses and gasketsNot DOT compliant.Replacement Part for OEM Number(s):6836803,6836903Specs

Drag Specialties - 78055050 - Rear Sprocket Spacer - .20" - '00-'24FeaturesZinc-plated steel spacer shims for rear sprocket or belt pulleyUsed often when installing a wider rear tireLonger bolts may...

Drag Specialties - 78055052 - Rear Sprocket Spacer - .30" - '00-'24FeaturesZinc-plated steel spacer shims for rear sprocket or belt pulleyUsed often when installing a wider rear tireLonger bolts may...

Drag Specialties - 78055051 - Rear Sprocket Spacer - .25" - '00-'24FeaturesZinc-plated steel spacer shims for rear sprocket or belt pulleyUsed often when installing a wider rear tireLonger bolts may...

Drag Specialties - 78052001 - Wedge Bulb - Dual-Filament - RedFeaturesConventional dual-filament #3157 style bulbsSpecs

Drag Specialties - 78052000 - Wedge Bulb - Dual-Filament - WhiteFeaturesConventional dual-filament #3157 style bulbsReplacement Part for OEM Number(s):6816704Specs

Drag Specialties - 78050015 - Clutch Pushrod End - Big TwinFeaturesStamped steel constructionIncludes oil slingerFor use with mechanical clutchesReplacement Part for OEM Number(s):3706990Specs

Drag Specialties - 35160199 - Tour-Pak® Lock - FL '92-'13FeaturesLock kit to be used with Tour-Pak®Replacement Part for OEM Number(s):5319407Specs

Drag Specialties - 35160225 - Tour Box Lid Gasket - FL '06-'13 Features OEM-quality replacement gasket Replacement Part for OEM Number(s):5341506 Specs <

Drag Specialties - 35160192 - Tour-Pak® Hardware Latch Kit - FL '87-'13FeaturesLatch kit to be used with Tour-Pak®Self-tapping screws and blue thread locker included; these are to be used for a more...

Drag Specialties - 35160193 - Tour-Pak® Hardware Tether Kit - FL '87-'13 Features Tether kit to be used with Tour-Pak® Specs

Drag Specialties - 35160191 - Tour-Pak® Hardware Hinge Kit - FL '87-'13FeaturesHinge kit to be used with Tour-Pak®Replacement Part for OEM Number(s):5344787,8500A,9096463Specs

Drag Specialties - 35160190 - Tour-Pak® Hardware Kit - FL '06-'13FeaturesComplete kit, includes everything necessary to install a Drag Specialties tourbox or H-D Tour-Pak®Individual hinge, latch, and...

Drag Specialties - 35011973 - Saddlebag Support Brackets - Black - FL '97-'08FeaturesHigh-quality chrome-plated finish replacements for use on most dresser modelsSet of one left- and one right-side...