2008

V-Twin - 52-0301 - 19 inch X 2.50 inch Wheel Rim and Spoke Kit ChromeDescriptionRim and spoke set include 19" x 2.50" front rim with 40 chrome spokes with 40 spoke nipples.Rim is steel and drop...

V-Twin - 52-0300 - 16 inch x 3 inch Wheel Rim and Spoke Kit Chrome SteelDescriptionRim and spoke set include 16" x 3" front rim with 40 chrome spokes with 40 spoke nipples.For use with a steel hub...

V-Twin - 52-0122 - 18 inch x 8.5 inch Rear Spoke WheelDescriptionFeatures 18" X 8.5" chrome steel rim, left side drive chrome billet hub with sealed bearings, and 60 chrome spokes, assembled.Rim...

Rear 16" x 3.5" Duro 36 Fat Spoke wheel features a matte black finish and 25mm bearings without flanges.Wheel hub includes installed 25mm sealed bearings and has 7/16-14 pulley mount threaded hole...

Front 21" x 3.15" Duro 36 Fat Spoke cast type wheel is dual disc, and features a matte black finish with 25mm bearings.Wheel bearing adapter sleeve sets, available separately. ...

V-Twin - 52-0002 - 21 inch x 2.15 inch Front Spoke Wheel BlackDescription21" x 2.15" replica front cast wheel includes a gloss black hub with a 25mm bearing and 36 spokes.Wheel accetps 3/4" (.750),...

Primary Nerf plate features stainless steel finish and manufactured with cast steel. Protect the outer primary on hard lean deft turns. Bolt on type. Fits:FLST 1999-2017FXST 1999-2017Additional...

Chrome 20" tall sissy bar is constructed of round solid stock featuring the original poor boy style. One piece welded design. Fits:FXD 2006-2017Additional Information

Black 13" tall sissy bar is constructed of round solid stock stock featuring the original poor boy style. One piece welded design. Fits:XL 2004-2020Additional Information

Chrome 13" tall sissy bar is constructed of round solid stock featuring the original poor boy style. One piece welded design. Fits:XL 2004-2020Additional Information

Touring torque linkage system features a black finish and will fit all Touring models with no modifications necessary to install unit.This unit will eliminate the lateral movement while still...

Touring torque linkage system features a chrome finish and will fit all Touring models with no modifications necessary to install unit.This unit will eliminate the lateral movement while still...

Nerf engine bar features a black finish and is manufactured with 1-1/2" steel tubes. Engine bar is for Touring models and can only be mounted by bolts. Engine bar will not fit Police models. Fits:FLT...

Nerf engine bar features a chrome finish and is manufactured with 1-1/2" steel tubes.Engine bar is for Touring models and can only be mounted by bolts. ...

Engine bar set features left and right sides with 1-1/4" tubing. For use with stock type saddle bag supports.2004-08 FLTR, FLHX, FLHRS models requires the separate pruchase of OEM #90781-93 Lower...

Bar complements the traditional Touring style and features 1-1/4" tubing.WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over...

V-Twin - 51-1342 - 150 Series Rear Tire Kit Description Kit includes 150 Dunlop tire, brake caliper, splash guard, wheel spacer, hardware, and tail lamp assembly.*Note: UPS may consider this part as...

Bar complements the traditional Touring style and features 1-1/2" diameter tubing.**WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances...

V-Twin - 51-1334 - Front Engine Guard ChromeDescriptionFront engine guard features a chrome finish with integrated rubber pads.All mounting hardware included. ...

V-Twin - 51-1322 - Lowered Rear Axle Plate Set RawDescriptionLowered rear axle plates are threaded 3/8"-18 for fender brace sissy bar mounting. Adjusters threaded 3/8"-24 use screws for adjusters, to...

Front engine bar features a black finish.Does not fit models equipped with fairing lowers. Fits:FLT 1997-2008 except Road GlideAdditional Information UOM

Front engine bar features a chrome finish. Fits:FXST 2006-2017 Dyna modelsFXDL 2014-2017FXDLS 2014-2017Additional Information OEM No.49

Front engine bar features black finish. Fits:FXST 2006-2017 Dyna modelsFXDL 2014-2017FXDLS 2014-2017Additional Information OEM No.49000

V-Twin - 51-1120 - Black Front Engine BarDescriptionBlack engine bar features 1-1/4" tubing.Will not fit with front spoilers. *NOTE: Does not fit the following models: 2016-UP XL 1200X, 2018-UP XL...

Rear engine bar set with black finish. Set includes saddle bag supports, left and right guards, and hardware to replace the under the saddlebag support with loop style saddlebag guards for a...

Engine bar features 1-1/4" tubing.Includes bolts, nuts and washers. Must order clamps separately. WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique...

Chrome swingarm mount kit includes right and left side chrome pivot caps, passenger footboards mount and passenger footboard with rubber pads.Installation will require re-installation of the original...

Chrome engine bar features 1-1/4" tubing with rubber pads on foot rests.*NOTE: Will not work with floorboards. *WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection...

Rear frame fork bracket set has a chrome finish and includes both the left and right side bracket. Brackets have peg mount holes.Sold as a pair. Fits:FLT 2007-2008Additional Information

Chrome engine bar features integrated rubber pads for foot rests.WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while...

Chrome engine bar features integrated rubber pads for foot rests.The engine bar has a diameter of 1-5/16". **WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection...

Engine bar features 1-1/4" tubing.WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped, very low speed slide)...

V-Twin - 51-0985 - Chrome Front Engine Bar with Footpeg PadsDescriptionEngine bar features 1-1/4" tubing with footpeg pads. Includes mounting hardware.WARNING: This engine/frame bar may provide...

V-Twin - 51-0939 - Chrome Front Engine BarDescriptionEngine bar features 1-1/4" tubing.Will not fit with front spoilers. *NOTE: Does not fit the following models: 2016-UP XL 1200X, 2018-UP XL 1200XS...

Engine bar set features left and right sides with 1-1/4" tubing. For use with stock type saddle bag supports.2004-08 FLTR, FLHX, FLHRS models requires the seperate purchase of OEM #90781-93 Lower...

Rear frame set bar features left and right sides with 7/8" tubing.The stock shape reflectors are not included. *NOTE: Not for use with saddlebag rails. **WARNING: This frame bar may provide limited...

Bar complements the traditional Touring style and features 1-1/4" tubing.WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over...

Chrome frame guard set includes left and right side with 7/8" tubing.*NOTE: Mounting hardware is not included, must be supplied by the installer. WARNING: This engine/frame bar may provide limited...

Engine bar features 1-1/4" tubing with rubber pads on foot rests and features a black gloss finish.WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique...

Black engine bar features integrated rubber pads for foot rests.WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while...