Softail Fat Boy Lo FLSTFB

Jims - 5534 Compensator Bolt Driver Torx Socket fits '14-'21 Big Twin Models Features: Correct-style driver/socket for the compensating sprocket retaining fastener

Jims - 900 6-Speed Main Drive Gear and Bearing Remover/Installer fits '06-'17 Touring, '06 Dyna & '07-'17 Softail Models Features: Complete kit for servicing the main drive gear or the main...

Jims - 1672 Crankshaft Bearing Tool fits '03-'17 Twin Cam “A” and “B” Motors Models Features: Designed to remove and replace the right crankcase bearing Press bearing in and out stra

Jims - 995 Case Splitter Tool fits '07-'17 Twin Cam & '06 Dyna Models Features: "Breaks" the case sealant by pushing apart both case halves Uses includ

Jims - 988 Valve Spring Compressor fits '05-'17 Twin Cam (Except SE Models), '04-'22 Sportster (Except RH Sportster) & Buell Models (Except 1125R) Features: Used to remove and replace valve and...

Jims - 972 6-Speed Main Drive Gear Seal Installer fits all '07-'20 Big Twin & '06 Dyna Models Features: Use to install main drive gear oil seal to the proper depth with transmission assembled

Jims - 975 Engine Rotator Tool fits '07-'17 Twin Cam & '06 Dyna Glide Models Features: Rotates flywheel/piston assembly with engine still in frame or on a bench

Jims - 937 7mm Valve Guide Remover fits '05-'17 Twin Cam, '04-'20 Sportster & '04-'09 Buell Models (Except 1125R) Features: Available from JIMS to allow the proper removal or installation of...

Jims - 938 7mm Valve Guide Installer fits '05-'17 Twin Cam, '04-'20 Sportster & '04-'09 Buell Models (Except 1125CR) Features:

Jims - 5506 Magnetic Tappet Holder fits all Twin Cam & M-Eight Models Features: Never turn the engine over if the tappet will not spin with your fingers after adjustments were made

Jims - 5530 Remote Fuel Tank fits H-D Models w/ Delphi Fuel Injection (Except V-Rod) Features: Tank is completely mobile, even when pressurized; canister does not need to be continuously...

Jims - 5820 Standard Rear Axle Installation Guide Tool fits '08-'21 Big Twin w/ Hollow 1” (25 mm) Features: Aligns wheel with swingarm, caliper brackets, wheel hubs and spacers Made i

Jims - 2244 3/8" 35 mm Fork Nut Socket fits For Big Twin & Sportster Models Features: Used to remove and install top fork nuts on fork tubes

Jims - 1146 Crankshaft Bearing Installer fits '00-'17 Twin Cam “B” Motors Models Features: Designed to protect engine cases by using a specially-designed support block to remove or install cam...

Jims - 1705 Exhaust Drill Plate fits '84-'17 Big Twin (Except M-Eight), '86-'22 Sportster & '94-'09 Buell Models (Except 1125R) Features: Will position the seal evenly into the exhaust port of...

Jims - 95760-57 Bushing Bearing Puller fits '66-'17 Big Twin (Except M-Eight), '57-'22 Sportster & Buell Models (Except 1125R) Features: Used to remove rocker bushing or bearing in one easy...

Jims - 33443-84 Tappet Aligning Tool fits 'L76-'17 Big Twin Models (Except M-Eight) Features: Can also be used to align rocker box bases on Evolution head (requires two tools)

Jims - 2260 Sprocket Lock Tool fits '99-'17 Twin Cam & '80-'99 Big Twin Models w/ Rear Belt Drive Features: Lock the transmission pulley for removing or installing pulley nut

Jims - 1288 Crankshaft Guide fits '99-'17 Twin Cam & '03-'09 Buell XB9R/X B9S Models Features: Spreads the crankcase pinion bearing rollers when reassembling right side case to the flywheel...

Jims - 1725 Head Bearing Race Installer fits '36-'17 Big Twin Models w/ Stock or Custom Frames (Except '14-'17 Dresser) Features: Use to install steering head races, stock and custom, as well as...

Jims - 34902-84 Mainshaft Bearing Race Tool fits 'L84-'20 Big Twin Models Features: Used to remove and install the inner bearing race on the transmission mainshaft Made in the U.S.A.

Jims - 955 Gauge for Harley-Davidson Injection Pressure fits '01-'20 Big Twin Models w/ Delphi EFI (Except '18-'20 Softails) Features: Includes all necessary parts to diagnose Delphi fuel...

Jims - 756 O2 Sensor Wrench fits '12-'17 Softail Models Features: Removes and installs O² sensors without removing exhaust pipes Made in the U.S.A.

Jims - 2232 Bearing Race Tool fits '84-'17 Big Twin (Except '14-'17 Dressers), '86-'22 Sportster & '94-'02 Buell OEM Frames (Will Also Work on Most Aftermarket Frames) Features: Removes and...

Custom Cycle Engineering - 41 mm Ultra Chrome Fork Tubes fits '99-'13 Touring (Except H-D FL Trike), '00-'17 Softail (Except FXS/​FXCW/​FXCWC), '00-'05 FXDWG Models (OEM #45890-97,...

Avon - Memory Foam Cable Throttle Grips Features: The softest, most durable, chemical resistant grips on the market today A true vibration dampening grip

Heavy breather perfomance air cleaner kit features a chrome finish. Kit is used to enhance performance and air flow when compared to the stock air cleaner. Kit features a chrome-plated elbow and a...

Belt Drives Ltd. - 2" Belt Drive Kit fits '07-'16 FLHR, '07-'13 FLHT/​FLTR/​FLHX Models w/ Mechanical Clutch Features: Features a two-piece motor plate design and 2" primary belt 52/69 pull

Belt Drives Ltd. - 2" Belt Drive Kit fits '14-'16 FLHT/​FLHR/​FLTRX w/ Hydraulic clutch (Exc. FLHTCUL/​FLHTKL) Features: Features a two-piece motor plate design and 2" primary belt 52/69 pulley...

Belt Drives Ltd. - 2" Belt Drive Kit fits '17-'20 FLHT/​FLHR/​FLHX/​FLTRX/​FLTRU/​FLTRK w/ Hydraulic Clutch Features: Features a two-piece motor plate design and 2" primary belt 52/69 pulley...

Colony - 3134-4 Jiffy Stand Mounting Kit fits '07-'23 Softail, '98-'22 Sportster & '02-'17 VRSC Models (Except RH Sportster Models (OEM #50003-89B) Features: Zinc plated 50003-89B pin, 554A clip,...

V-Twin - 3/4" Inner Diameter Front Axle Spacer '86-'95 FLST Model (OEM #43654-86A) Chrome front axle spacer is for the left side and fits on 1986-up FLST. Spacer has an overall length of 3/4"...

V-Twin - 3/4" Inner Diameter Front Axle Spacer fits '89-Up FLSTF Model (OEM #43657-89) Chrome front axle spacer is for the right side on a 1989-up FLSTF. Overall length is 1" x 3/4" inner diameter...

V-Twin - Chrome Front Axle fits '07-'17 FLST Model (OEM #41545-07) Axle with threaded end has a 10-1/4" bearing surface length and can be used to replace a worn out or damaged axle Fitment: FLST...

V-Twin - Chrome Rear Axle Adjuster Kit fits '08-'17 FLST/FXST Models (OEM #4433) Chrome rear axle adjuster kit includes collars and adjuster screws with nuts Fitment: FLST 2008-2017 FXST 2008-2017

V-Twin - Zinc Swingarm Bushing Set fits '08-Up FXST, '00-Up FLST Models (OEM #48048-00A) Swingarm bushing set comes in a zinc finish Fitment: FXST 2008-UP FLST 2000-UP

V-Twin - Chrome Front Turn Signal Highway Bar fits '00-'17 FLST Model Chrome front turn signal highway bar features built in amber LED lights to work as turn signals. **WARNING: This engine/frame bar...

V-Twin - Black Front Turn Signal Highway Bar fits '00-'17 FLST Model Black front turn signal highway bar features built in amber LED lights to work as turn signals. **WARNING: This engine/frame bar...

V-Twin - Chrome Domed Fork Triple Tree Stem Nut fits '86-'94 FXR, '91-Up FXD, '86-Up FLST/Sportster Models Chrome domed triple tree fork stem nut. Fitment: XL 1986-UP FXR 1986-1994 FLST 1986-UP FXD...

V-Twin - Right and Left Mid Control Kit fits '86 '17 FXST/FLST Models Natural stainless steel construction mid control kit for Softail models. Bolt on installation. Kit includes right brake control...