Dyna Street Bob FXDB

DP - High-Performance Steel Clutch Plates fits '90-'17 Big Twin Models (Exc. Models W/ Slipper/Assist Clutch) (Repl. OEM #s 37913-98 & 37913-90) The DP High-Performance Steel Clutch Plates will neither expand nor fade or promote clutch swell. Qty...

Jagg - Deluxe Diamond Cut Oil Cooler System This special edition oil cooler kit is as spectacular and durable as the gem it is named after. It is the perfect solution for Harleys with perimeter, vertical frame tubes. This cooler mounts to the left frame...

Drag Specialties - Electronic Speedometer Sensor Repl. OEM#74402-05B This Electronic Speedometer Sensor is a direct replacement for OEM sensors. Fitment 2019 Harley-Davidson Electra Glide Police FLHTPI 2019 Harley-Davidson Electra...

Features: Billet 6061 aluminum Drilled with 1/2" hole for internal wiring Works with any standard 1" handlebar Sold in pairs with top clamp and 5/16-18 x 7/8" hardware Base hole tapped for standard 1/2-13 mounting bolts (bolts not included) Fits...

The H2 Bars look good on everything!  Features 1-inch O.D. x 0.120 wall seamless 4130 chromoly tubing with precision mitered and TIG welded joints. Threaded bungs on vertical uprights are CNC-machined chromoly steel with1/2-13 t.p.i. holes to...

Arlen Ness - 12-Point Titanium Rocker Box Bolt Kit Features: 12-Point rocker box bolt kits that are CNC machined from solid titanium Each titanium 12-Point bolt is meticulously CNC machined, featuring a spot drilled bolt head & lightning hole...

Arlen Ness - Titanium 12-Point Primary Cover Bolt Kit fits '07-'16 Twin Cam Touring Models Features: 12-point bolts feature a spot drilled bolt head and lightning hole design on the bolt flange Kit includes all needed bolts for the engine's outer...

Arlen Ness - 12-Point Titanium Cam Cover/Point Cover Bolt Kit Features: 12-point bolts feature a spot drilled bolt head & lightning hole design on the bolt flange M8 kits include all needed bolts for both the engine's cam cover & point...

Arlen Ness - 12-Point Transmission Side Cover/Trap Door Bolt Kit - Titanium Features: 12-point bolts feature a spot drilled bolt head and lightning hole design on the bolt flange Kit includes all needed bolts for the transmission side cover and trap...

Arlen Ness - 12-Point Titanium Derby Cover Bolt Kit Features: CNC machined from solid titanium Fitment 2025 Harley-Davidson Road Glide Custom FLTRX - - 2025 Harley-Davidson Road Glide 3...

Arlen Ness - Titanium 12-Point Lifter Block Bolt Kit Features: 12-point bolts feature a spot drilled bolt head and lightning hole design on the bolt flange Kit includes all 8 needed bolts required for front and rear lifter blocks Reduced weight...

Thrashin Supply Co. - Aggressor Foot Pegs Features: Designed to provide the maximum amount of grip and improve ground clearance while maintaining a sleek and timeless design Twelve replaceable cone-shaped stainless steel cleats per footpeg Cutaway...

Arlen Ness - Gold Anodized Clear Tear Series Air Cleaner Kit fits '01-'17 Twin Cam EFI Models & '99-'06 CV Carb - Cable Throttle (Used) The breather design of this air kit is o-ringed at the heads and passes through the backing plated and exits...

1FNGR - Signature Series Adjustable Easier Pull Clutch + Brake Lever Combo fits Dyna/Softail Models Features: Full range of quick adjustability smooth 2 finger lever design for improved comfort Easier pull over OEM by (30%) average Built in mirror...

Vance & Hines - Weaved Carbon Fiber VO2 Falcon Air Intake Kit fits '99-'07 Touring (Except '99-'01 Touring Fuel Injection w/ Lower Fairings), '00-'15 Softail (Except '11-'15 CVO), '99-'17 Dyna Models (Except '16-'17 FXDLS) Features: Clean...

James Gasket - Main Drive Gear Seal fits '07-'17 Twin Cam, '06 Dyna Models (OEM #12074) Features: Top quality main drive gear shaft seals Fitment 2016-2017 Harley-Davidson Fat Boy S FLSTFBS - - 2016-2017 Harley-Davidson Softail...

James Gasket - Transmission to Engine Seal fits '07-'16 FLHT, '06-'17 Dyna Models (OEM #35607-06) Features: Made in the U.S.A. Fitment 2016-2017 Harley-Davidson Low Rider S FXDLS - - 2015-2016 Harley-Davidson Electra Glide...

James Gasket - Breather Gasket fits '11-'17 Twin Cam Models (OEM #17025-03) Features: High-quality genuine James Gaskets Made in the USA Fitment 2016-2017 Harley-Davidson Fat Boy S FLSTFBS - - 2016-2017 Harley-Davidson Softail...

James Gasket - Rocker Housing Gasket fits '99-'17 Twin Cam Models (OEM #16719-99A, 16719-99B) Features: Strategically placed elastomer beading helps ensure a positive seal while our clear silicone conformal coating fills in minor imperfections in the...

James Gasket - Rocker Cover Gasket fits '99-'17 Twin Cam Models (OEM #17386-99A) Features: Strategically placed elastomer beading helps ensure a positive seal while our clear silicone conformal coating fills in minor imperfections in the flanges and...

James Gasket - Primary Cover Gasket fits '06-'16 FLT, '07-'17 Softail/Dyna Models (OEM #34934-06) Features: Top quality gasket Made in the USA Fitment 2016-2017 Harley-Davidson Fat Boy S...

Jims - 8385 Compensator Nut Retainer fits '12-'13 Twin Cam & Screamin’ Eagle Models (OEM #83935-09A, 40274-08A) Features: Lockplate secures nut into sprocket retainer Incorporated lock tab One piece sprocket retainer for strength Made in...

Jims - 981 Cruise Drive/6-Speed Main Drive Gear Tool fits '07-'17 Twin Cam & '06 Dyna Models Features: Holds the main drive gear square to its bearing bore, eliminating any marring of gear or bearings Installs the main drive gear without...

Jims - 986 Cruise Drive/6-Speed Main Drive Gear Bearing/Seal Installer Tool fits '07-'20 Big Twin & '06 Dyna Models Features: Holds bearings and seal square to its bore, eliminating any marring Install both bearings and seal with use of a...

Jims - 984 Transmission Door Puller fits '07-'17 Big Twin & '06 Dyna Models Features: Removes transmission door with gears and shaft attached Made in the USA Puller will not damage door bearings...

Jims - 989 Main Drive Gear Sprocket Locknut Wrench fits '07-'21 Big Twin & '06 Dyna Models Features: Removes hex nut from end of main drive gear that secures the rear drive transmission pulley Extra-long two-piece design Made in the USA Inner...

Jims - 939 Sealed Wheel Bearing Tool fits '00-'17 Twin Cam, '00-'22 Sportster & '02-'17 V-ROD Models Features: Removes and installs 3/4", 1" and 25 mm wheel bearing with or without Anti-Locking Brake System (ABS) Made in the U.S.A...

Jims - 901 Cruise Drive/6-Speed Main Drive Gear Remover Tool fits '07-'20 Big Twin & '06 Dyna Models Features: Removes the main drive gear from the main bearing correctly while in the transmission case Eliminates the need of an arbor press and...

Jims - 911 Cruise Drive/6-Speed Trap Door Bearing Remover/Installer fits '07-'20 Big Twin & '06 Dyna Models Features: Accurately installs and removes lubed ball bearing into transmission trap door No arbor press needed Made in the U.S.A...

Jims - 767 6-Speed Transmission Case Shifter Shaft Seal Installer fits '06-'20 Big Twin & '84-'05 Sportster Models Features: Makes installing shifter shaft seal precise and effortless Aligns, centers and installs shifter seal to correct...

Jims - 1658 Transmission Shifter Shaft Sleeve Tool fits '06-'20 6-Speed H-D Cruise Drive Models Features: Can be used to remove, install replacement or upgrade shifter shaft sleeve, assembly and drum Use to install shifter shaft sleeve Made in the...

Jims - 739 5 & 6-Speed Cruise Drive Countershaft Bearing Remover/Installer Tool Features: Install or remove the closed-end countershaft bearing on all 5-speed or 6-speed transmissions without using a press or tapping it in with a transmission...

Jims - 729 Inner Primary Seal/Bearing Removal/Installation Tool fits '85-'20 Big Twin Models Features: Gives a much better feel than a press while eliminating the possibility of applying too much pressure to the parts Provides precise installation...

Jims - 967-4 Installation/Removal Inner Primary Bearing Tool fits '07-'20 Big Twin & '06 Dyna Models Features: Safely removes and installs inner primary bearing without any damage to new bearing by pushing on outer perimeter of bearing Also...

Jims - 967-5 Inner Primary Bearing Tool fits '07-'19 Big Twin & '06 Dyna Models Features: Safely removes and installs inner primary bearing without any damage to new bearing by pushing on outer perimeter of bearing Also removes and installs...

Jims - 5502 Ultimate Clutch Adjusting Tool fits '85-'20 Big Twins Models w/ Mechanical Clutch Features: Allows the quick and accurate tightening of the clutch adjusting screw jam nut without having the screw change position No more guessing or...

Jims - 5534 Compensator Bolt Driver Torx Socket fits '14-'21 Big Twin Models Features: Correct-style driver/socket for the compensating sprocket retaining fastener Made in the USA For use with Jim's part# 10500031 compensator bolt...

Jims - 1672 Crankshaft Bearing Tool fits '03-'17 Twin Cam “A” and “B” Motors Models Features: Designed to remove and replace the right crankcase bearing Press bearing in and out straight with no damage to the case Made in...

Jims - 995 Case Splitter Tool fits '07-'17 Twin Cam & '06 Dyna Models Features: "Breaks" the case sealant by pushing apart both case halves Uses included hand thread-in pushing screw Flywheels will be pushed from the left case Bolts to primary...

Jims - 988 Valve Spring Compressor fits '05-'17 Twin Cam (Except SE Models), '04-'22 Sportster (Except RH Sportster) & Buell Models (Except 1125R) Features: Used to remove and replace valve and new-style conical valve spring Requires use of JIMS...