V-Twin Manufacturing

Chrome upper pushrod cover set includes 2-13/16" long clips Fits: XL 1986-1990

Harley Davidson 2007 Dyna Big Twin Factory Service Manual The V-Twin Big Twin Factory Service Manuals cover disassembly, renewal, and assembly procedures. This manual also includes information on...

S&S Shorty Carburetor Accent Kit Brass S&S shorty carburetor accent kit includes brass components. Carburetor is not included.   *NOTE: Petcock includes built in needle and...

Harley Davidson FLT Rear Axle Kit fits 1986-1999 Rear axle kit includes 12-1/2" bearing surface length axle with 3/4" outer diameter. Fitment: FLT 1986-1999 Measurements: Bearing Surface -...

V-Twin - 12-Volt Wiring Outlet Receptacle Box This is a wiring outlet receptacle box designed for 12-volt cell phones, MP3 players or lighters. Features Unit has a 90-centimeter rubber-coated...

1200cc XL Conversion cylinder and piston set includes 2 black finished with milled edge fin cylinders with fitted Wiseco moly 9.5:1 reverse dome piston ring set. Order head base gasket separately...

1200cc XL Conversion cylinder and piston set includes 2 silver finished with milled edge fin cylinders with fitted Wiseco moly 9.5:1 reverse dome piston ring set. Order head base gasket separately...

Chrome velocity stack kit includes chrome support bracket, breather nipples, and 2-1/2" chrome stack. Fits: FXST 1999-2007 FLST 1999-2007 FXD 1999-2007

VT No: 25-2253 Cast 4" dog bone riser set solid brass construction with polished finish. Top and bottom clamps are for 1" bars. Set of two. Order pinch bolts and acorn nuts separately. Solid brass...

V-Twin 4-Piston Left Side Caliper Fits Harley-Davidson 84-99 FXST/XL, 86-99 FLST, 91-99 FXD, 91-94 FXR Models 4 piston caliper with 2000-up styling to retro fit 1984-1999 models for left side...

V-Twin - 7" Headlamp Bracket fits '04 & Up Touring Models This headlamp bracket is designed for 7"-style headlamp units and has a smooth black finish. NOTE: This bracket is required for use...

1200cc XL cylinder and piston conversion kit includes two black finished cylinders with milled edge fin and fitted Sifton moly 9.5:1 reverse dome piston and ring set. Fits: XL 1986-2003

V-Twin's 1200cc XL conversion cylinder and piston set includes 2 black finished with milled edge fin cylinders. Cylinders have fitted Wiseco moly 9.5:1 reverse dome piston and ring set. Order rocker...

V-Twin's 1200cc XL conversion cylinder and piston set includes 2 silver finished with milled edge fin cylinders. Cylinders have fitted Wiseco moly 9.5:1 reverse dome piston and ring set. Order...

Acorn style axle kit has an overall length of 9" and a 5/8" inner diameter. Kit includes spacer. Dimensions: Acorn Nut Threads: 7/8" Long Spacer End-to-End: 1-5/8" Threads per Inch:...

V-Twin - Air Cleaner Assembly Kit Black - Fits Harley XL Sportster '91-Up   Air Cleaner Assembly includes oval air cleaner with black mesh cover, integral breather system with bracket, and...

V-Twin - Anderson Clamp Style  Alloy Footpeg Set This clamp-on mount footpeg set features chopper style pegs with an original sand cast finish with clamps. Fitment All models with 1" frame...

V-Twin - Anderson Stud Mount Alloy Footpeg Set This stud mount Anderson footpeg set features chopper style pegs with an original sand cast finish with mounting blocks. Features Stud has 7/16" x...

V-Twin - Anderson Stud Mount Brass Footpeg Set This Anderson brass footpeg set features original chopper style pegs with an original sand cast finish with mounting blocks. Features Stud has...

V-Twin - Bates Style Brake/ Clutch Lever Assembly Bates polished stainless steel hand lever assembly with ball end includes lever for brake or clutch and bushing as original. Features a 5/16" hole...

V-twin large thick style tuck and roll style solo seat features black vinyl covering on a steel base plate. Length: 13" Width: 14" Thickness: 8 cm  Fits: Custom application

V-twin large, thin, tuck and roll style solo seat features black vinyl covering on a steel base plate. Measurements Length: 13" Width: 14" Thickness: 6 cm  Fits: Custom application

V-twin black vinyl solo seat features a metal base-plate which includes studs for mounting springs and nose brackets. Order mount kits and nose T bracket separately. The two spring studs under the...

This V-twin small, thin style tuck and roll  solo seat features black vinyl covering on a steel base plate. Length: 12-1/2" Width: 10" Thickness: 6 cm  Fits:Custom application

V-Twin - Black 1" Handlebar Riser Set V-Twin's handlebar riser set is built for use with 1" diameter handlebars. It has a custom short style with black aluminum billet and a contrast cut...

V-Twin - Black 7" LED Headlamp Unit W/ Turn Signal fits '94-'13 Touring Models This unit comes with an LED turn signal ring. NOTES: Requires 31-0080 mounting bracket for installation on 1999-2013...

V-Twin - Black Alloy Racer Style Footpeg Set fits '80 & Up FX and '86 & Up Sportster Models These are adjustable male end mount footpegs that have a racer design and alloy construction with...

V-Twin - Black Dash Panel fits '82-'92 FXR Models This FXR dash panel has a black finish and comes with holes to accommodate the fuel gauge and gas cap instruments. Suggested to use with #39-0242...

V-Twin - Black FXR Mid-Control Kit fits '82-'94 FXR Models V-Twin's replica black driver bracket set is designed to mount passenger style pegs. The set features a right mount bracket, a right...

V-Twin - Black Replica Rear Fender Strut Set fits '82-'91 FXR Models This replica rear fender strut set is constructed of aluminum and has a black finish. Fitment FXR 1982-1986FXRT 1983-1991

V-Twin Black Steel Side Cover Set Fits '84-'94 FXR/FXRS Models This set of side covers replaces OEM Part No. 66351-82. Features: Frame side cover set is constructed of steel and has a smooth...

V-Twin - Black Vinyl Solo Seat The V-Twin Black Vinyl Solo Seat features a metal base plate that comes with studs for mounting springs and nose brackets. The space between the studs measures 3.137"...

V-Twin - Black/ Copper 5-3/4" Bottom Mount Headlight This is a Bates style mount headlamp with traditional glass composite beam. Features: 5-3/4" headlamp bottom mount and H-4 bulb black...

Harley Sportster Rocker box cover set with black finish. Fits: XL 2007-2012

V-Twin - Blue Glass License Plate Reflector Set This reflector set measures 1" in diameter and features a stud, a spring and a wing nut. The reflectors have a faceted design to match the original...

V-Twin Bobbed 2.3 Gallon Gas Tank - fits '04-'06 Harley XL Sportster Models Bobbed gas tank accepts a left side petcock and has a fuel capacity of 2.3 gallons. Tank includes mounting hardware...

V-Twin - Bobbed 2.3 Gallon Gas Tank - fits '07-Up Harley XL Sportster Models The V-twin Bobbed gas tank accepts a left side petcock and has a fuel capacity of 2.3 gallons. Tank includes mounting...

V-Twin - Bobber Hand Control Kit fits 1" Handlebars - Chrome Bobber hand control kit features a chrome finish. Kit includes the clutch and brake, for use with 1" handlebars. Master cylinder is...

V-Twin - Brass Sand 1" Pullback Riser Set V-Twin's brass sand riser set is designed to be used with 1" handlebars. It has a smooth casting polished finish. Fitment Custom application

Bushing set include bushings for #1, 2, 3, 4 cams. NOTE: Bushing set is for outer cam cover. Set of four. Fits: XL 1957-1990 OEM No: 25588-80