Upper spring rod nut for use on the top of the spring rods. Fits:UL 1937-1948G 1936-1957WL 1936-1952EL 1936-1948FL 1941-1948Additional Information UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages784

Spring Fork front rocker stud set includes hex cap covers. Set of 4 for both rockers.Suggested to use when a fender is not going to be installed. Fits:UL 1936-1948EL 1936-1940G 1941-1957FL 1941-1948Additional Information UOM1 - SET ManufacturerV-Twin ...

45" front hub washer kit includes 2 copper shims, 2 studs, and 1 steel shim. Fits:W 1941-1952Additional Information OEM No.44348-29 UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages794

Front axle kit for 45 features a black front axle with parkerized hardware.NOTE: Axle is 3/8" in diameter, bare steel. Fits:G 1936-1940W 1936-1952Additional Information UOM1 - KIT ManufacturerV-Twin OriginUSA 2025 Catalog Pages794

45 brake backing plate kit is for the front and the backing plate features a gloss black finish.Bearing thrust cover assembly not included. Fits:W 1940-1952Additional Information UOM1 - KIT FinishBlack LocationFront ManufacturerV-Twin OriginImported...

Kit features zinc plated U clamp with chrome acorn nuts for use with the front engine bar bolt cover. Fits:FL 1955-1957EL 1936-1940FL 1941-1947Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages622

Spring fork rocker kit includes studs and necessary mounting hardware to install the rockers on the inside of the fork. Kit is for use with 3/8" axle.Rockers feature a black finish with bushings installed. Fits:WR 1936-1952DL 1930-1935W...

Rod nut set includes two hex nuts with attached acorn top nut for ease of installation, in a chrome finish.Hex nut is covered by an acorn top nut, why? Less cost than machining an acorn nut. This is a 4 piece kit. ...

Backing plate assembly includes a chrome backing plate, chrome arm, shoes, springs, parkerized speedometer drive and cam completely assembled.Check speedometer drive fit before final assembly. Order drum and axle kit separately. Fits:W...

Rod nut set includes two hex nuts with attached acorn top nut for ease of installation, parkerized as original!Hex nut is covered by an acorn top nut, why? Less cost than machining an acorn nut. This is a 4 piece kit. ...

Replica Spring Fork black finish handlebar with inline tree features full brazed construction as original.Handlebar is exact replica for 1937-42 Spring Fork models with parkerized end plugs included, but can be used on 1936 models. If specifically...

WR Spring fork rods are zinc plated steel. Set includes two shock units to replace rods on front spring fork legs.Body is zinc plated and the rod/socket features a parkerized finish. Fits:G 1937-1957U 1937-1948W 1937-1952EL 1936-1948FL...

New Old Stock" side valve army guide headlamp trim rim. Fits:W 1941-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages816

New Old Stock" Buco brand rigid chain enclosure outer cover only. Black finish, scratched.We only have this one 1/2 left, great for wall art! Fits:FL 1941-1957EL 1936-1952Additional Information UOM1 - EA FinishBlack ManufacturerV-Twin OriginUSA 2025...

Flanders riser tops for flanders risers include rubber bushings, clamps, and acorn nuts. Risers are a forged solid brass construction for greater density and are polished for a smoother surface finish.For use with Flanders riser stems as replacement for...

Bracket for late style or aftermarket Guide brand spotlamps, features a zinc finish. Fits:EL 1938-1948UL 1938-1948Additional Information UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages1113

Seat post rod and spring kit includes a full set of heavy duty springs with an 15-7/8" inner seat rod and hardware.This spring set will carry additional weight. Can be installed on Big Twin seat post assemblies for rebuild application. Fits:EL...

Clutch hub nut kit for 45 includes nut, steel lock tab, and seal kit which consists of 9/16" oil seal, 13/16" oil seal, seal retainer, seal spring, pushrod quide and washer. Fits:G 1941-1973W 1941-1952Additional Information UOM1 - KIT ...

45 kickstand hardware kit includes chrome spring, zinc lock tab and bushing. Fits:W 1936-1952Additional Information UOM1 - KIT FinishChrome ManufacturerV-Twin OriginImported 2025 Catalog Pages813

Brake shoe set.Sold as a pair. Fits:G 1941-1957EL 1936-1948FL 1941-1948Additional Information UOM1 - SET LocationFront ManufacturerV-Twin OriginImported 2025 Catalog Pages791 Tech NoteSuggested to use with #49-0853 Dual Cam Brake Assembly Black.

Spring fork rocker stud set features a black finish with parkerized hardware.Set of four. Set includes 2 long with slot (OEM #45676-30), 1 short with tip (OEM #45674-30), and 1 short with slot (OEM #45675-30). For use on 45 Solo models with 3/8" axle and...

Handlebar throttle spark spiral features a push type action with a nickel plated threaded sleeve and collar.. Fits:VL 1930-1935JD 1924-1929J 1913-1936W 1936-1952Additional Information OEM No.3312-16 UOM1 - EA ManufacturerV-Twin OriginImported 2025...

Parkerized lug bolt set is long style and includes five bolts with safety wire holes. Set is an exact replica. Fits:FL 1941-1966EL 1936-1952Additional Information UOM1 - SET FinishParkerized ManufacturerV-Twin OriginImported 2025 Catalog Pages577

Side cover is made from drop forged cast steel to ensure top quality and is specially machined for a perfect fit with no visual differences onthe outside. Inside cover is made to fit 3 or 4-speed transmission gears.The welch plug is installed. *NOTE:...

Spring Fork handlebar assembly includes 4" chrome flanders style risers, zinc plated offset triple tree, and 1" buckhorn handlebars with knurls in the proper position for the riser-tree combination. Fits:EL 1946-1948UL 1946-1948FL 1946-1948Additional...

Spring Fork handlebar kit includes 4" chrome Flanders style risers, zinc plated inline tree, and Buckhorn 1" handlebars with knurls in proper position for the riser-tree combination. Fits:EL 1936-1945G 1936-1957FL 1941-1945W 1936-1952Additional...

Deluxe chrome footboard insert with shot peen surface replaces rubber inserts as the original 1940's accessory pair.Includes 8 pieces of 6-32UNC X 3/8 fillister head screws with nyloc nuts for mounting. NOTE: Drilling of 4 holes in boards for mounting of...

This 5" round black replica mirror face is for use as a replacement on our early style Spring Fork mirror kit. Fits:G 1934-1957UL 1937-1948WL 1936-1952EL 1936-1940VL 1934-1936FL 1941-1945Additional Information UOM1 - EA ManufacturerV-Twin ...

Replica 45" cotton braided brake cable assembly for Spring Fork front end. Includes inner cable and outer cotton braided casing.NOTE: Outer cable are crimped on each end and includes oiler fitting that is installed. Fits:G 1936-1957FL 1936-1948WL...

Side valve 45/74 fork stud adapter bushing, adapts 74 rockers to 45 legsAllows lower rocker stud hole to be reduced to 7/16" inner diameter from 1/2". Fits:G 1941-1957WL 1940-1952EL 1936-1948FL 1941-1948Additional Information UOM10 - PK ...

Chrome handlebar riser link has a measurement of 4-3/4" center to center mount holesIncludes hardware. Fits:FL 1949-1959Additional Information OEM No.56165-49 UOM1 - EA ManufacturerV-Twin OriginImported StyleSmooth 2025 Catalog Pages610

Side valve 1st gear shifter clutch Fits:WL 1938-1952G 1938-1973Additional Information OEM No.35441-41 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages811

Mainshaft 1st gear includes a bronze bushing for 45" model transmissions.Gear includes replacement bushing which must be installed and honed to size. *NOTE: Gear bushing will require Honing for proper fitment. The inner diameter of the bushing should be...

Parkerized rear horn mount bracket for Spring Fork front end Fits:EL 1936-1940FL 1941-1957Additional Information OEM No.69003-42 UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages1171

Chrome Spring Fork spotlamp bar shock Fits:G 1946-1957FL 1946-1957UL 1946-1947WL 1946-1952Additional Information OEM No.68616-46 UOM1 - EA MeasurementsAdditional InformationBtwn Mounting Bars: 7-15/16" ManufacturerV-Twin OriginImported 2025...

Black Spring fork with rods. Fork has an overall length of 18". Measurement is from top of the fork to the bottom center of the rocker mount. Spring Forks are stock length.The inner diameter of the rocker stud holes are 1/2". Fits:UL 1937-1948EL...

Atlas" style Replica front engine bar bolt cover. Top of the casting is cutout for both frame rails on straight frames.Order "U" bolts, acorn nuts and clamp kit, available separately. Fits:FL 1955-1957EL 1936-1940FL 1941-1947Additional Information UOM1...

Atlas" style Replica front engine bar bolt cover. Top of the casting is cutout for both frame rails on straight leg frames. Features a raw finish.Order "U" bolts, acorn nuts and clamp kit, available separately. Cover sold as a raw casting, may be sanded...

Spring Fork rod bushings have a zinc finish and are sold in a pair. Fits:UL 1937-1948EL 1936-1940FL 1941-1948Additional Information UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages784

Bag lock for one saddlebag only. For 1958-1963 or Bubble bags with keys Fits:FL 1958-1963Additional Information UOM1 - EA MeasurementsAdditional InformationLength: 2-3/8"Width: 1-5/6"Height: 5/8" ManufacturerV-Twin OriginImported 2025...