Gloss black engine guard features 1-1/2" tubing, and is OE style.*NOTE: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual weight, which will result in higher shipping costs. Fits:FL 1948-1957Additional Information ...

Rigid rear fender shell is the front half withouth the tail and features a raw finish. One piece chain relief features 3 ribs indented.Bare fender body without weldments. Fits:FL 1949-1957Additional Information UOM1 - EA ManufacturerV-Twin ...

Rear fender end side strip is for the rear right side. Fits:W 1939-1948UL 1939-1948EL 1939-1940FL 1941-1948Additional Information OEM No.59883-39 UOM1 - EA ManufacturerV-Twin OriginImported

Rear fender front end side strip is sold as a set of two. Fits:W 1939-1948UL 1939-1948EL 1939-1940FL 1941-1948Additional Information OEM No.59881-39 UOM1 - SET ManufacturerV-Twin OriginImported Replacement Items50-1899 - Rear Fender Rear End Side...

Front fender rear end side strip is for the left side. Fits:UL 1940-1948G 1949-1949FL 1940-1948WL 1949-1949Additional Information OEM No.59212-39 UOM1 - EA ManufacturerV-Twin OriginImported

Front fender rear end side strip is for the right side. Fits:UL 1940-1948G 1949-1949FL 1940-1948WL 1949-1949Additional Information OEM No.59209-39 UOM1 - EA ManufacturerV-Twin OriginImported

Front fender front end side strip is sold as a set of two. Fits:UL 1940-1948G 1949-1949FL 1940-1948WL 1949-1949Additional Information OEM No.59205-39 UOM1 - SET ManufacturerV-Twin OriginImported Replacement Items50-1896 - Front Fender Rear End Side...

Rigid right rear fender bracket with chain guard provision features a raw steel construction. Fits:FL 1941-1957EL 1936-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported StyleStock

Rigid left rear fender bracket with chain guard provision features a raw steel construction. Fits:FL 1941-1957EL 1936-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported StyleStock

Rear fender lower reinforcement pad features a raw finish and three holes.The triangle plate is spot welded in place to reinforce mount hole locations. Fits:FL 1941-1957EL 1936-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

Fender brace inner pad set features a raw finish. Pads should be spot welded inside the rear fender under the brace. Fits:FL 1941-1957Additional Information UOM1 - SET ManufacturerV-Twin OriginImported

Fender reinforcement plate features a raw finish and is for use with u-clamps.Includes 4 holes to accept bolt where the u-clamps mount. Fits:FL 1941-1957Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

Rigid rear fender hinge includes both halves assembled with a pin in a raw finish. Connects the rear tail to the main body of the fender.Hinge features channel, for tail lamp wires tube and allows use of tail lamp tube to be spot welded ot hing half...

V-Twin - 50-1661 - Panhead Luggage RackDescriptionReplica Panhead luggage rack feature the 3 channel design.Replica luggage rack replaces OEM #53403-52. Requires OEM #53457-52, Panhead luggage rack stud nuts, for installation. The fender must first be...

Rear fender loom tunnel piece features a raw finish. Loom tunnel is short curved and is used to connect hinge loom assembly with loom tube on the fender skirt.For rigid frame fenders. Tail must be welded onto rear fender hinge. Fits:EL 1936-1948FL...

Rear fender wire/loom tube features wire loom. The tube is formed in places as one piece.Protects the tail lamp wires. *NOTE: Must order the hinge assembly separately. Fits:FL 1936-1948EL 1936-1948Additional Information UOM1 - EA ManufacturerV-Twin ...

Raw alignment clips are for hinged rear fenders, to be spot welded on the front portion of the fender.Sold as a pair. *NOTE: Used to align and hold the rear tail flap edges in place. Fits:FLH 1941-1978Additional Information UOM1 - SET ...

Fender kit includes 6" wide front fender shell and bracket.Bracket is black finish, hardware not included. Fender must be drilled before installation *NOTE: We suggest pre-fitting the fender prior to painting or finishing. Bracket for Bobber front fender...

Swingarm rear fender hinge features a raw finish. Hinge includes both halves with pin but without wire loom tail.Hinge halves are produced with correct pin and hinge offset for installing on original and aftermarket. Center to center of the rivet holes...

Fender bracket mounts to the front fork leg at shock mount holes.Bracket for Bobber front fender may be installed on front or rear of front spring fork. We show as mounted on front outside. Fits:FL 1941-1962EL 1936-1940UL 1938-1948Additional...

Tool box kit is for 45 models with two keys included. Kit also features a black tool box, zinc plated bracket and mount kit. Bracket is bolt on installation. Fits:W 1941-1952Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025...

Tool Box kit is for 45 models with two keys included. Kit also features chrome tool box, zinc plated bracket, and mount kit. Bracket is bolt on installation. Fits:W 1941-1952Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025...

Black 18" sissy bar is constructed of 10mm outer diameter solid cold rolled steel bar featuring the original poor boy style.Mounts to fender side tabs. *NOTE: Fits custom rigid frames. ...

Black 25" sissy bar is constructed of 10mm outer diameter solid cold rolled steel bar featuring the original poor boy style.Mounts to fender side tabs. *NOTE: Fits custom rigid frames. ...

Front fender trim set features a stainless steel finish.Sold as a 4 piece set. ...

*2021 New Production chrome front fender tip.Tips attach by 2 stud on each tip. Installation requires drilling of holes in fenders. Order side rails separately. *NOTE: Front fender tip is for Spring Fork front fender only, installation requires hand...

Chrome 18" sissy bar is constructed of 10mm outer diameter solid cold rolled steel bar featuring the original poor boy style.Mounts to fender side tabs. *NOTE: Fits custom rigid frames. Fits:FL 1941-1957Additional Information UOM1 - EA ...

Chrome 25" sissy bar is constructed of 10mm outer diameter solid cold rolled steel bar featuring the original poor boy style.Mounts to fender side tabs. *NOTE: Fits custom rigid frames. Fits:FL 1941-1957Additional Information UOM1 - EA ...

Replica top fender rivets for rigid rear fenders.Sold as a pack of 25. Fits:EL 1936-1952FL 1941-1952Additional Information UOM25 - PK ManufacturerV-Twin OriginImported

Fender tip set features a rocket design and chrome finish.Fender tips are constructed of brass sheet for accurate detail and fit of the original 1940's tip. Fender tips are developed with new tooling, exclusively by V-Twin Manufacturing. Perfect fit as...

Rear fender stay set feature a raw finish.Sold as a set of two. Fits:FL 1949-1957Additional Information UOM1 - SET MeasurementsAdditional InformationWidth: 3/4" ManufacturerV-Twin OriginImported Tech NoteSuggested to use with VT #50-0366...

Rear fender loom channel features segment design to facilitate wire installation. Fits:FL 1949-1957Additional Information UOM1 - EA ManufacturerV-Twin OriginImported StyleStock 2025 Catalog Pages616 Tech NoteSuggested to use with #50-0366, Replica...

Raw steel wire loom fender strip for inside of the left FL rear hinged fender, radiused to fit the fender contour, and segmented to accept tail lamp wires.Must be spot welded to the left side or inside of the fender to coneect to the coil loom. Fender...

Wire loom spring clamp features a raw finish and is for use with the rear fender. To hold spring loom cover in place use #32-2036. Clamp is sold in a pack of 5.*NOTE: Must be spot welded on. Fits:FL 1948-1978Additional Information UOM5 - PK ...

FL fender strut set features a chrome finish solid lazer cut from heavy duty steel.Allows custom fenders to be mounted at the height desired for seat position requirements. The distance from the center of the big hole to the center of the little one on...

Replica rigid rear fender hinge set features a raw finish. Includes 2 halves of hinge and a tail channel with pin. Hinge features an indent.Set includes curved wire loom channel tube. Hinge halves are produced with correct pin and hinge offset for...

FL fender strut set features a black finish solid lazer cut from heavy duty steel.Allows custom fenders to be mounted at the height desired for seat position requirements. *NOTE: Requires 7-1/4" fender to be fitted. Fits:FX 1971-1984FL...

Rigid tool box kit includes black tool box, bracket, and mount kit for rigid hardtail frames. The kit is used for lower right side frame mounting. Includes Tedd Cycle Patch.Imported tool boc with brackets made in the USA, must be welded on. Fits:FL...

Front fender trim set includes front fender tip and front fender trim side rails. Fits:FL 1957-1966Additional Information OEM No.59204-57 UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages618 Replacement Items50-0950 - Chrome Front...

Rigid tool box includes chrome tool box, bracket, and mount kit for rigid hardtail frames. The kit is to mount on the right side lower rear frame tube. Includes Tedd Cycle patch.Bracket must be welded on. Fits:FL 1948-1954Additional Information UOM1 -...