Front or rear star hub wheel include all original style components installed. This hub is completely assembled featuring a chrome finish.OEM type hub includes all internal factory units that are also interchangeable. The distance from the outside of the...

This black star hub has a smooth black finish and a parkerized outer star cover, with parkerized slotted screws. This replica hub includes all original style components installed and is completely assembled.OEM type hub includes all internal factory...

This standard nipple set is 22mm long and is cadmium plated.Set of 40 pieces. Fits:FL 1941-1984Additional Information UOM1 - SET MeasurementsAdditional InformationLength: .866" ManufacturerV-Twin OriginImported SizeAll Other 2025 Catalog...

WR front spool hub is nickel plated with 40 holes and accepts stock WL front wheel internals.*NOTE: This is the original design of the Private or Privateer Raders of the 1940's. They use the two small flanges attached to the center tube by five rivets on...

Front spool hub is nickel plated and includes 3/8" internal ball bearings that accepts stock WL 45 axle and nuts.Includes a 3/8" inner diameter threaded sleeve to adapt the sealed ball bearings on each side. Will accept a 4.9" wide axle and nuts for use...

V-Twin - 44-1941 - 45 inch Front Wheel Hub Bearing KitDescriptionFront wheel hub bearing kit includes race, ball bearings, and seal. For WR and WL brake drum style hubs. Fits:G 1936-1940W 1936-1952Additional Information UOM1 - KIT ManufacturerV-Twin ...

VL retro wheel bearing kit includes two ball bearing and spacers, used for replacing loose rollers and cages on VL wheel hubs. Kit is for interchangeable wheels and can be used for either the front or the rear.*NOTE: Bearing assembly consists of 5 pieces...

This complete 5 piece parkerized rear axle sleeve kit includes the sleeve, sleeve nut, 5/8" hex nut, sleeve collar and spring lock plate.For use on rigid frame with mechanical brakes fitted to star hub wheels in parkerized finish. Fits:EL 1937-1952FL...

Cone nut for use with cone front hub axle sleeve.*NOTE: Nut accepts felt seal washer. Fits:W 1944-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages794 Tech NoteSuggested to use with #44-2005 Axle Sleeve with...

45" front wheel hub grease distributor tube. Fits:W 1943-1952Additional Information OEM No.43638-43 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages794

Star hub gasket kit includes small and large cork, star gasket, 2-internal snap rings and outer cork retainer washer .Six piece set. Fits:FL 1941-1965EL 1936-1952Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages761

45" W wheel hub kit includes all parts required for assembly of a bare hub.Internal hub races not included. Fits:W 1936-1952Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported Replacement Items44-0926 - 45" Front Wheel Hub Grease...

Internal tapered wheel bearing kit is the Timken style for star hubs.*NOTE: Will not fit OEM roller bearing star hubs. If required, order sleeve for 1941-1957 rigid models. Fits:EL 1936-1966Additional Information UOM1 - KIT MeasurementsAdditional...

VL wheel hub kit includes a parkerized hub, bearing assembly, lock ring collar and lock ring tool.For use on 18" or 19" front and rear wheels. Fits:VL 1930-1936Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages819 ...

VL wheel rebuild kit includes sealed bearing assembly and wheel hub inner and outer nut and washer. Spanner tool included. Fits:VL 1930-1936Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages819 Replacement...

Axle collar set accepts 11/16" diameter front axle.*NOTE: For use on stock rigid frame axle plates to fit 11/16" axle with the 7/8" wide slot. Fits:FL 1941-1957Additional Information UOM1 - SET LocationFront ManufacturerV-Twin OriginImported 2025...

Replica rigid rear axle brake sleeve features a ground finish. Fits:FL 1941-1957EL 1936-1952Additional Information UOM1 - EA LocationRear ManufacturerV-Twin OriginImported 2025 Catalog Pages769

Rear axle sleeve features a raw oiled finish. Sleeve is for use on mechanical brakes on Rigid frames. Fits:FL 1941-1957Additional Information OEM No.41600-36 UOM1 - EA ManufacturerV-Twin OriginImported

Rigid rear axle features a parkerized finish. Fits:FL 1941-1957EL 1936-1952Additional Information UOM1 - EA FinishParkerized LocationRear ManufacturerV-Twin OriginImported 2025 Catalog Pages768

Replica wheel hub bearing thrust plate kit includes inner star and outer parkerized star. Fits:UL 1937-1948 front or rearEL 1936-1940 front or rearFL 1941-1966 front or rearWL 1935-1952 rear onlyAdditional Information OEM No.43566-35 UOM1 - KIT ...

Spring fork axle kit includes spacer, nut kit, axle sleeve, and 9-1/2" bearing surface length axle.*NOTE: For Spring Fork outside rockers with right side offset stock rockers. Fits:UL 1937-1948EL 1936-1940FL 1941-1948Additional Information UOM1 - KIT ...

Kit includes a parkerized 10-1/2" axle, nuts, sleeves and spacer. Fits:WL 1941-1952Additional Information OEM No.41551-41 UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages768 Replacement Items44-0343 - Rear Axle Spacer Black44-0331 -...

Kit includes square head 11" bearing surface length axle with flat head, nuts, sleeve, and spacer.Kit is stepped, .685", .678" and .670". *NOTE: Axle is flat on end as original! Fits:UL 1937-1948EL 1936-1940FL 1941-1957Additional Information OEM No...

Replica kit includes inner star, grease fitting, and outer parkerized star. Fits:UL 1937-1948 front or rearEL 1936-1940 front or rearFL 1941-1966 front or rearWL 1935-1952 rear onlyAdditional Information OEM No.43569-55 UOM1 - KIT ManufacturerV-Twin ...

5/16" X 32 threaded grease fitting is bright nickel plated that feautures 2 threads. Fits:UL 1937-1948 front or rearEL 1936-1940 front or rearFL 1941-1966 front or rearWL 1935-1952 rear onlyAdditional Information OEM No.9851 UOM10 - PK ...

Bearing thrust plate kit includes inner star, grease fitting , and outer chrome star. Fits:UL 1937-1948 front or rearEL 1936-1940 front or rearFL 1941-1966 front or rearWL 1935-1952 rear onlyAdditional Information OEM No.43569-55 UOM1 - KIT ...

Wheel hub bearing thrust collar. Fits:UL 1937-1948 front or rearEL 1936-1940 front or rearFL 1941-1966 front or rearWL 1935-1952 rear onlyAdditional Information OEM No.43561-39 UOM1 - EA MeasurementsAdditional InformationInner Diameter: 1...

Fitting is 5/16" x 32. Fits:UL 1937-1948 front or rearEL 1936-1940 front or rearFL 1941-1966 front or rearWL 1935-1952 rear onlyAdditional Information UOM10 - PK ManufacturerV-Twin OriginImported 2025 Catalog Pages762

Large wheel hub roller retainer is constructed of steel. Fits:UL 1937-1948 front or rearEL 1936-1940 front or rearFL 1941-1966 front or rearWL 1935-1952 rear onlyAdditional Information OEM No.43578-35 UOM1 - EA ManufacturerV-Twin OriginImported 2025...

Small Wheel hub roller retainer. Fits:UL 1937-1948 front or rearEL 1936-1940 front or rearFL 1941-1966 front or rearWL 1935-1952 rear onlyAdditional Information OEM No.24721-30 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages762

Wheel hub thrust bearing sleeve. Fits:FL 1941-1966 Front or RearUL 1937-1948 Front or RearEL 1936-1940 Front or RearWL 1935-1952 Rear onlyAdditional Information OEM No.43556-35 UOM1 - EA LocationFront or Rear ManufacturerV-Twin OriginImported 2025...

Chrome wheel hub thrust bearing cover without grease fitting hole. Fits:UL 1937-1948 front or rearEL 1936-1940 front or rearFL 1941-1966 front or rearWL 1935-1952 rear onlyAdditional Information OEM No.43566-35A UOM1 - EA ManufacturerV-Twin ...

Hub thrust washer, outer star side. Fits:UL 1937-1948 front or rearEL 1936-1940 front or rearFL 1941-1966 front or rearWL 1935-1952 rear onlyAdditional Information OEM No.43563-35 UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages762

Inner Star hub thrust washer. Fits:UL 1937-1948 front or rearEL 1936-1940 front or rearFL 1941-1966 front or rearWL 1935-1952 rear onlyAdditional Information OEM No.43552-39 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages762

Thrust washer for a roller bearing on the brake side. Fits:UL 1937-1948 front or rearEL 1936-1940 front or rearFL 1941-1966 front or rearWL 1935-1952 rear onlyAdditional Information OEM No.43558-39 UOM5 - PK MeasurementsAdditional InformationOuter...

Retainer washer for Wheel hub cork. Fits:UL 1937-1948 front or rearEL 1936-1940 front or rearFL 1941-1966 front or rearWL 1935-1952 rear onlyAdditional Information OEM No.43564-35 UOM10 - PK ManufacturerV-Twin OriginImported 2025 Catalog Pages762

VL rear axle features a parkerized finish. Fits:VL 1930-1936Additional Information UOM1 - EA FinishParkerized LocationRear ManufacturerV-Twin OriginImported 2025 Catalog Pages819

Front axle kit features a parkerized finish. Includes axle and spacer.Sold as a two piece kit. Fits:VL 1930-1936Additional Information UOM1 - KIT FinishParkerized LocationFront ManufacturerV-Twin OriginImported 2025 Catalog Pages819

Replica wheel hub bearing kit parkerized includes internal rebuilding parts to assemble a bare star hub.Includes .002" oversize center race sleeve, rollers and comes without grease fitting in the star cover. Fits all interchangeable wire wheels. Fits:FL...

Replica wheel hub bearing kit parkerized includes internal rebuilding parts to assemble a bare star hub.Includes standard size center race sleeve, standard rollers and comes without grease fitting in the star cover. Fits all interchangeable wire wheels...