V-Twin - 35-1018 - EFI Fuel LineDescriptionEFI fuel line replaces the fuel line from the tank to the fuel rail. Fits:FLT 2012-2016Additional Information OEM No.61208-10 UOM1 - EA ManufacturerV-Twin OriginUSA

V-Twin - 35-0989 - inchR inch Linkert Fuel FittingDescriptionR" linkert fuel fitting is machined of brass and accepts a 3/8" hose for threading on all linkert needle seat fittings on Harley.*NOTE: When installing, check the length of the hex nut to make...

V-Twin - 35-0979 - OKO 3/8 inch NPT Hex Petcock PolishedDescriptionOKO polished 3/8" NPT hex body petcock with downward facing 5/16 fuel spigot.Does not include 22mm nut. Includes stainless steel screen. Fits:FL 1966-1974XL 1955-1974Additional...

V-Twin - 35-0968 - 1/4 inch Turn Linkert Throttle KitDescriptionKit includes a 1/4" turn fast throttle, 43" cable and cable end.For conversion the of linkert carburetor throttle assembly on the right side of motor. *NOTE: Throttle uses less rotation to...

V-Twin - 35-0954 - Linkert Carburetor Atomizer with ScreenDescriptionLinkert carburetor atomizer with screen. Fits:FL 1941-1965Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages706

V-Twin - 35-0953 - Linkert Carburetor Bombsight VenturiDescriptionBombsight Venturi fits 1-1/4" for the Linkert Carburetors.*NOTE: "Bombsight" type venturi's may require a shorter main nozzle. Fits:W 1941-1952Additional Information UOM1 - EA ...

V-Twin - 35-0952 - Linkert Thumb Choke LeverDescriptionLinkert thumb choke lever includes detent ball and spring. Fits:W 1933-1952EL 1936-1952VL 1930-1936Additional Information OEM No.1233-33 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog...

V-Twin - 35-0950 - Chrome Fuel Tank Fitting CoverDescriptionChrome fuel tank fitting cover for EFI models only. Fits:FLT 2003-UPFLST 2002-2017FXST 2002-2017FXD 2004-2007Additional Information OEM No.62809-06 UOM1 - EA ManufacturerSifton ...

V-Twin - 35-0949 - Linkert Carburetor Bombsight VenturiDescriptionBombsight Venturi fits 1-1/2" for the brass Linkert carburetors and is the performance dual venturi used on WR MR-3, MR-4, KR and KH models. Has a 1-/32" inner tube suspended in the 1-1/4"...

V-Twin - 35-0941 - Intake Manifold for 1-7/8 inch TypeDescriptionIntake Manifold for 1-7/8" type carburetor with O-ring type head. Fits:Custom applicationAdditional Information UOM1 - EA MeasurementsAdditional InformationLength: 5-3/8" ...

V-Twin - 35-0939 - inchL inch Series Carburetor Throttle ShaftDescriptionThrottle shaft "L" type is for S&S "L" series 1-7/8" carburetors. Fits:Replacement application for S&S "L" series carburetorAdditional Information UOM1 - EA ...

V-Twin - 35-0937 - WR Conversion Intake Manifold KitDescriptionWR intake manifold kit includes intake manifold, nuts, brass seals and a Tedd Cycle patch. Manifold allows use of larger carburetor for increased air flow.This kit is designed for WR model...

V-Twin - 35-0932 - Fuel Petcock Shut Off RodDescriptionThis petcock shut off rod is zinc plated and is for use on left side fuel petcocks on Side Valve models.This extension lever makes it easier to turn the petcock on and off on models where it may be...

V-Twin - 35-0921 - 22mm OKO Hex Petcock PolishedDescriptionPolished OKO hex petcock includes 22mm hex nut for installation.Includes stainless steel screen. *NOTE: Spigot faces under the body for 5/16" fuel outlet. Fits:FL 1975-1985XL 1975-1985FX...

V-Twin - 35-0897 - Linkert Needle, Seat and Brass Strainer SetDescriptionBrass gas strainer with screen, needle and seat.The seat fitting is included. *NOTE: Thread on needle seat is 1/8" NPT. Must order filter screen separately. Fits:FL 1941-1965W...

V-Twin - 35-0891 - Petcock Adapter Set ChromeDescriptionChrome petcock adapter set is used for converting Magneti Marelli injection to carburetor system.Includes fuel outlet plug. Petcock adapter set can be used with any 22 mm petcock. Fits:FLT...

V-Twin - 35-0889 - XL Intake Flange KitDescriptionXL intake flange kit includes two zinc plated intake flanges, two intake manifold seals and four allen screws, for EFI 2007-up XL applications. Fits:XL 2007-UPAdditional Information UOM1 - KIT ...

V-Twin - 35-0886 - Fuel Strainer Filter NickelDescriptionFuel strainer features a nickel finish over a machined red brass.Nickel fuel strainer is specifically for 1936-1937 M-5 linkert carburetors. Screen and gaskets not included. Must order filter...

V-Twin - 35-0884 - Linkert Carburetor VenturiDescriptionThis Venturi will downsize the 4-bolt M-74 1-1/2" brass Linkert carburetor so that it can be used on a flathead model that originally had a 1-1/4" carburetor.This Venturi will allow the atmospheric...

V-Twin - 35-0883 - Zicad Left Side PetcockDescriptionLeft side petcock features 3/8"-18 National Pipe Thread, the body is machined from brass and the handle is steel, and has a zicad finish.*NOTE: Diassemble petcock, remove cotter pin, and use fine...

V-Twin - 35-0882 - Replica Petcock Nickel PlatedDescriptionNickel plated petcock features 1/8"-27 NPT on the side fitting the gas tank and 1/2"-24 NPT on fuel line connection side.*NOTE: Diassemble petcock, remove cotter pin, and use fine compound to...

V-Twin - 35-0881 - Zicad Right Side PetcockDescriptionZicad right side petcock features 1/8"-27 NPT on the side fitting the gas tank and 1/2"-24 NPT on fuel line connection side. Petcock is machined from brass.*NOTE: Diassemble petcock, remove cotter...

V-Twin - 35-0879 - Copper Fuel Strainer without ScreenDescriptionFuel strainer is machined from copper that features a natural finish.The inlet and outlet fittings are 7/16" x 20 TPI. The nut is features a 7/16"-24 thread SAE. *NOTE: Must order filter...

V-Twin - 35-0876 - Gasket and Screw KitDescriptionGasket and screw kit for gas tank sender units. Fits:FLT 1988-1995Additional Information UOM1 - KIT ManufacturerTri Starr OriginUSA Tech NoteSuggested to use with #35-0602 Gas Tank Sender Unit.

V-Twin - 35-0868 - 1/4 NPT-22MM Petcock Adapter NutDescriptionBrass Petcock adapter nut is for connecting 1/4" NPT petcock to 22mm petcock on male fuel tank set. To use with S&S and OKO carburetor. Fits:Custom application for S&S and OKO...

V-Twin - 35-0866 - Linkert Carburetor Throttle Lever CadmiumDescriptionLinkert carburetor throttle lever is constructed of investment cast steel and has a cadmium plated finish. Fits:WL 1937-1952UL 1937-1948G 1937-1956Additional Information UOM1 - EA ...

V-Twin - 35-0863 - Intake Manifold Nut and Seal KitDescriptionParkerized intake manifold nuts with brass seals.Note: For use with a 3-bolt 61" manifold on large port knuckleheads. ...

V-Twin - 35-0860 - Oversize Carburetor Throttle Disc for 1-1/4 CarburetorDescriptionCarburetor throttle disc is .025 oversize. Used for 1-1/4" carburetor that requires an oversized throttle disc due to wear. Fits:WL 1929-1952Additional Information OEM...

V-Twin - 35-0857 - Old School 1 inch Throttle ChromeDescriptionOld school 1" throttle features a chrome finish. For use with single cable applications and requires seperate purchase of throttle tube. Fits:Custom ApplicationAdditional Information UOM1 -...

V-Twin - 35-0856 - Old School 1 inch Throttle BlackDescriptionOld school 1" throttle features a black finish. For use with single cable application and requires seperate purchase of throttle tube. Fits:Custom ApplicationAdditional Information UOM1 - EA ...

V-Twin - 35-0844 - Replica Zinc Plated Intake ManifoldDescriptionReplica zinc plated intake manifold features a longer lip for attaching o-ring and flat seals, with stainless steel V-Twin clamp with shoe.This intake manifold will help improve the...

V-Twin - 35-0843 - XL CV Carburetor Bracket with BreatherDescription2020 New Production XL CV carburetor bracket with breather, mounts CV carburetors to fuel injected models and allows mounting of CV air cleaners. Features a natural alloy finish.For S&S...

V-Twin - 35-0839 - XL EFI Breather Bolt Set 2 inch Description 2" long breather bolt set for use with shorty carburetor mount brackets.Set is for S&S and OKO shorty carburetor installations. Fits: XL 1991-UP Additional...

V-Twin - 35-0838 - 4-1/4 inch Petcock Nylon ScreenDescription4-1/4" Nylon petcock screen. Fits:FLT 2002-2006FXST 2002-2006FXD 2002-2006FLST 2002-2006XL 1995-UPAdditional Information OEM No.62166-02 UOM1 - EA ManufacturerV-Twin OriginImported 2025...

V-Twin - 35-0835 - Petcock ScreenDescriptionPetcock replacement filter screen. Fits:Replacement application for petcocks with 3/8" NPT threadAdditional Information UOM5 - PK ManufacturerV-Twin OriginImported 2025 Catalog Pages1194 Tech NoteFor...

V-Twin - 35-0834 - Petcock ScreenDescriptionPetcock replacement filter screen.Reserve tube not included. Fits:Replacement application for petcocks with 13/16" nut connectionAdditional Information UOM5 - PK MeasurementsAdditional InformationOuter...

V-Twin - 35-0826 - Intake Manifold Nut and Seal KitDescriptionIntake manifold nut and seal kit is for linkert carburetors and plumber type manifolds.Includes two parkerized nuts and two machined brass seals. Fits:FL 1941-1954EL 1940-1952Additional...

V-Twin - 35-0799 - Zicad Plated 45 inch Intake Manifold KitDescriptionFlathead zicad plated intake manifold kit has brass packing rings and parkerized nuts.*NOTE:: Zicad is a dull shade of zinc similar to cadmium. Fits:G 1937-1973W 1937-1952Additional...

V-Twin - 35-0791 - Breather Bolt Set ChromeDescriptionChrome breather bolt set. Bolt has a 1/2 X 13 thread and are 1-3/4" long.Bolt location, center to center, on Big Twin models is 15cm. Fits:FXD 1992-1998FLST 1992-1998FXST 1992-1999XL 1991-UPFXR...

V-Twin - 35-0787 - Intake Manifold Flange Set BilletDescriptionBillet intake manifold flange set for use when installing larger throttle bodies for EFI. Fits:FLST 2007-2017FXD 2007-2017FXST 2007-2017Additional Information UOM1 - KIT ManufacturerSifton ...