Dyna Clutch, Driveline & Trans

Drag Specialties Kevlar, Organic, or Steel Clutch Plates for '99-'17 Harley Twin Cam The Drag Specialties Clutch plates are designed to allow precise shifting. These are made super tough, which means they'll last. To top it all off, Drag has made sure...

Drag Specialties Inner Clutch Hubs for Harley Softail, Dyna, and Touring Models Drag Specialties is known for providing quality products at reasonable prices and this Inner Clutch Hub is just that. It accepts all OEM components which means this is not...

Belt Drives LTD. Kevlar Clutch Kit fits '98- '16 Big Twin Clutch plates are made of 6061-T6 or high tempered steel with Belt Drives Ltd. race proven kevlar material. Each plate design was tested so that the maximum performance is achieved. Different...

Eastern Motorcycle Parts Clutch Hub Bearings Features: High-quality replacement component Sold each Fitment: '11-'17 Twin Cam; repl OEM #37906-11 '99-'10 Twin Cam; repl OEM #37906-90 '91-'18 XL; repl OEM #36799-91 '86-'90 XL; repl OEM...

Trask Billet Clutch Basket for Harley Twin Cam 2007-2016 Trask Clutch Basket for Harley Twin Cam models 2007-2016 comes with basket and a set of 6 bolts. Replace it before it breaks; this clutch basket can handle engine builds making in excess of 300...

Trask - High Pressure Power Plate Spring Kit fits '09-'23 Big Twin & M8 Models Trask's High Pressure Power Plate Spring Kit features a precision machined billet aluminum power plate with high performance springs and chrome 12-point hardware. You'll...

Barnett Heavy-Duty Clutch Springs Fits XL Models 1986-2018, Twin Cam Models 1999-2017 Barnett's Heavy-Duty Clutch springs are stronger than the stock springs, they're built to last and withstand competitive usage. There are three fitment options:...

Mueller Motorcycle AG - Power Clutch fits '99-'23 Big Twin Models w/ Mechanical Clutch Features: The original Müller Power Clutch Replaces OEM inner and outer ramp assemblies 45% easier clutch lever operation Easy to install; no drilling or...

Barnett - Scorpion Low-Profile Lock-Up Clutches NOTE: 2016-19 FL's using the OE derby cove require the derby cover sacer from Barnett. Pease see the 'Also Bought' section for details. Replacement clutch plates available under part number 1131-2446...

The Burley Brand Lite Clutch reduces effort required to pull clutch lever by 40%, which lessens rider fatigue and provides smoother, easier clutch action. Ideal for women riders, or stop-and-go traffic. The Lite Clutch fits inside the primary cover on...

Barnett Scorpion Billet Clutches Fits Big Twin Models Note that the fitment option for 1999-2006 Big Twin Models requires the Scorpion pressure plate for use with hydraulic system OEM #s 45380-02, 45992-03. Replacement plate sets are available under...

Drag Specialties Clutch Shells  The Drag Specialties Clutch Shells include center bearing and snap rings making the mounting process a breeze. It also has a starter ring gear. Ride your Harley Davidson Motorcycle with ease knowing you're using high...

Rekluse RadiusX Auto Clutches This high performance clutch combines Rekluse's Torq-Drive and EXP technologies giving riders more power and control. Features: Dead-on clutch engagement everytime Take-off and stop in gear without using clutch lever -...

Belt Drives Ltd. High Performance Clutch Kit w/ Extra Plate Fits '98-'17 Twin Cam Models Does not fit models with slipper/assist clutch. Features: Includes 10 friction plates on 6061-T6 aluminum cores, nine tempered steel drive plates and a 10%...

Drag Specialties - Diaphragm Clutch Spring Fits '90-'97 Big Twin Models Replaces OEM#37871-90 Features Standard-duty replacement spring Made in the U.S.A. Fitment 1997 Harley-Davidson Softail Heritage Springer...

Belt Drives Ltd. Clutch Plate Kit Fits '98-'17 Twin Cam Models Does not fit models with slipper/assist clutch. Features: Includes nine friction plates on 6061-T6 aluminum cores and eight tempered steel drive plates Stack height is pre-set for easy...

The Burly Brand Lite Clutch reduces effort required to pull clutch lever by 40%, which lessens rider fatigue and provides smoother, easier clutch action. Ideal for women riders, or stop-and-go traffic. The Lite Clutch fits inside the primary cover on...

Drag Specialties - Inner Clutch Hub fits '90-'97 Big Twin Model Replacement OEM# 37550-90A Features Improved inner clutch hub with reinforced insert Accepts all OEM components Fitment 1997 Harley-Davidson Softail Heritage Springer...

Drag Specialties - Wet or Dry Friction Plate Set fits '68-'E84 Shovelhead Models Replaces OEM#37930-68 Features Runs wet or dry; meets or exceeds all OEM specs Contains (5) friction plates and (1) hub liner with...

DP - Heavy-Duty Clutch Kit fits '98-17 Evo Big Twin Models (Exc. Models W/ Slipper/Assist Clutch) This HD clutch kit comes in a foam-lined hard plastic case which protects the clutch components from damage prior to installation. This case can be used to...

Drag Specialties - Clutch Shell fits '90-'93 Big Twin Models This top-notch clutch shell comes to you with center bearing and snap rings, all ready for an easy installation. Sold each. Replaces OEM#37707-90. Features Replacement clutch shell with...

Drag Specialties - Clutch Shell fits '94-'97 Big Twin Models This top-notch clutch shell comes to you with center bearing and snap rings, all ready for an easy installation. Sold each. Replaces OEM#37707-94. Features Replacement clutch shell with...

Torqdrive® Clutch Kit fits '90-'97 Big Twin Models Torqdrive delivers more discs in less space so this kit includes six friction disks that offer up to 50% stronger clutch engagement with no increase in lever effort. They provide more friction and...

Trask Hydraulic Side Cover fits Harley Touring 2007-2013, Softail 2007-2018 Trask Hydraulic Side Cover fits 2007-2013 FL Touring, 2007-2018 Softail (except 2016-2017 FLSS, FLSTFBS), and 2006-2017 Dyna w/ H-D 6-Speed Transmission. Features: Machined...

DP - High-Performance Steel Clutch Plates fits '90-'17 Big Twin Models (Exc. Models W/ Slipper/Assist Clutch) (Repl. OEM #s 37913-98 & 37913-90) The DP High-Performance Steel Clutch Plates will neither expand nor fade or promote clutch swell. Qty...

Converts stock diaphragm spring to coil spring Increase tunability of clutch More positive linear clutch action Fits : '98 - '13 Big Twin

DP - Heavy-Duty Extra Plate Clutch Kit fits '90-'97 Evo Big Twin & '91-'22 Sportster Models Each of DP's Heavy-Duty Extra Plate Clutch Kit comes with nine friction plates and eight steel drive plates. Please note springs are sold separately...

DP - High-Performance Friction Clutch Plates fits '90-'97 Evo Big Twin & '91-'22 Sportster Models (Repl. OEM #s 37911-90 & 37910-90) The DP High-Performance Friction Clutch Kit Plates have DP's exclusive high-heat friction materials for...

DP - High-Performance Friction Clutch Plates fits '98-'17 Evo Big Twin Models (Exc. Models W/ Slipper/Assist Clutch) (Repl. OEM #37932-98) The DP High-Performance Friction Clutch Plates have DP's exclusive high-heat friction materials for fade-free...

DP - High-Performance Steel Clutch Plates fits L'84-'97 Big Twin & '91-'22 Sportster Models (Exc. '21-'22 Sportster S/RH 1250S, '22 Nightster/RH975 Models) (Repl. OEM #s 37975-90, 379795-84A & 37913-90) The DP High-Performance Steel Clutch Kit...

Barnett - Scorpion Clutch Baskets fits '07-'17 Twin Cam, '06 Dyna W/ Mechanical/Hydraulic Clutch Models These Scorpion Clutch Baskets serve as the supreme replacement for stock baskets. When you order a Barnett product, you are ordering a product from...