Electra Glide FLH

Weld on frame footpeg mount without thread.Mount can be welded to 1958-1977 swingarm frames to utilize the stock FXE mount and raise the peg position. Sold as a pair. Fits:FX 1971-1978FL...

Replica rear hardtail frame section is duplicated from an original rigid frame. Weld-on type and does not have seat post bushing.The rear transmission mounts are 1-1/2" tall. This hardtail includes...

Beaded windshield is a fixed mount type which comes completely assembled.Includes beaded windshield top and an adjustable lower windshield to fit FL aluminum headlamp cowl assembly. The center bolt...

Top beaded windshield measure 18" and is for use on fiberglass fairings only.Fits 1969-1984 FLH 4 speed and 1980-1985 FLT 5 speed models with Batwing fairings. Fits:FLT 1980-1985FLH...

Top beaded windshield is short style. Fits:FLH 1949-1984Additional Information OEM No.58020-49A UOM1

Frame saver mounting kit for gas tanks must be welded to Big Twin stock or custom frames. Casting features provision for damper pin, as required on 1949-1984 Big Twins.*Note: Includes speedometer...

Replica wishbone frame is an authentic reproduction of a 1948 Big Twin rigid frame with seat post, axle, and transmission plate already installed. The legs are smooth and do not have horn mount...

Solid steel frame dowel set is for the installation of hardtails.Outer diameter on small end is .7225 and large end is .8375. *NOTE: Must be welded in place. Fits:FL 1958-1984Additional Information

FL fender strut set features a chrome finish solid lazer cut from heavy duty steel.Allows custom fenders to be mounted at the height desired for seat position requirements. The distance from the...

FL fender strut set features a black finish solid lazer cut from heavy duty steel.Allows custom fenders to be mounted at the height desired for seat position requirements. *NOTE: Requires 7-1/4"...

V-Twin - 50-1148 - Zinc Plated Fender BracketDescriptionZinc plated steel bracket used to adapt one piece FXDF front fenders to fit FLH forks on 1949-up 41mm models.Set of two. Bracket is formed from...

Tool box kit includes chrome oval tool box with 2 keys, zinc plated mount bracket and liner.Bracket will mount tool box on left side in rear of outer primary cover. Fits:FX 1977-1984FL...

Chrome rear fender strut set is of solid steel construction and is for use with Bobbed fender only. Fits:FX 1973-1984FL 1958-1984Additional Information U

Drag Specialties - DS750733 - PistonFeaturesOEM quality cast aluminum alloy constructionSome fitments feature pistons with a coating that extends piston life, reduces friction and allows for cooler...

Drag Specialties - DS750732 - PistonFeaturesOEM quality cast aluminum alloy constructionSome fitments feature pistons with a coating that extends piston life, reduces friction and allows for cooler...

Drag Specialties - DS750731 - PistonFeaturesOEM quality cast aluminum alloy constructionSome fitments feature pistons with a coating that extends piston life, reduces friction and allows for cooler...

Drag Specialties - DS750724 - PistonFeaturesOEM quality cast aluminum alloy constructionSome fitments feature pistons with a coating that extends piston life, reduces friction and allows for cooler...

Drag Specialties - DS750723 - PistonFeaturesOEM quality cast aluminum alloy constructionSome fitments feature pistons with a coating that extends piston life, reduces friction and allows for cooler...

Drag Specialties - DS750722 - PistonFeaturesOEM quality cast aluminum alloy constructionSome fitments feature pistons with a coating that extends piston life, reduces friction and allows for cooler...

Drag Specialties - DS750721 - PistonFeaturesOEM quality cast aluminum alloy constructionSome fitments feature pistons with a coating that extends piston life, reduces friction and allows for cooler...

Drag Specialties - DS750720 - PistonFeaturesOEM quality cast aluminum alloy constructionSome fitments feature pistons with a coating that extends piston life, reduces friction and allows for cooler...

Drag Specialties - DS720814 - Fender License Plate Mount - ChromeFeatures4" x 7" mount includes dual rubber gaskets, allowing the angle of the mount to be raised or lowered as neededIncludes all...

Drag Specialties - DS720018 - Regulator Mount - Harley Davidson - ChromeFeaturesAllows the regulator to be mounted down and back out of sightOptional 10-24 holes on back of mount for ground wireMade...

Drag Specialties - DS719933 - Fender Tip Light - AmberFeaturesDOT compliantThese tip lights are a perfect fit on OEM and aftermarket front and rear fendersClear fender light comes with amber and red...

Drag Specialties - DS719932 - Fender Tip Light - RearFeaturesDOT compliantThese tip lights are a perfect fit on OEM and aftermarket front and rear fendersClear fender light comes with amber and red...

Drag Specialties - DS393489 - Hinged Read Fender - Raw - SteelFeaturesHigh quality with a raw steel smooth finish and no taillight holeReplacement Part for OEM Number(s):5960465ASpecs

Drag Specialties - DS393470 - Wide Glide-Style Front Fender with Chrome Mounting Brackets - For 19" or 21" WheelFeaturesCustom Wide Glide-style front fender with chrome mounting bracket and raw...

Drag Specialties - DS393488 - Replacement Front FenderFeaturesDesigned specifically as an OE replacementAlso fits FLT and FLHT models when additional trim holes are drilled.Replacement Part for OEM...

Drag Specialties - DS390130 - Gas Cap - Vented - ChromeFeaturesReplacement gas caps for OEM and custom tanksWill not fit screw-in type tanks.Replacement Part for OEM Number(s):6110273Specs

Drag Specialties - DS390131 - Gas Cap - Non-Vented - ChromeFeaturesReplacement gas caps for OEM and custom tanksWill not fit screw-in type tanks.Replacement Part for OEM Number(s):6110373Specs

Drag Specialties - DS390126 - "Live to Ride" Gas Cap Covers - ChromeFeaturesGas cap covers are a great way to detail a bikeDetailed chrome eagle/banner with the "Live to Ride" script recessed into...

Drag Specialties - DS380201 - Spoke Set - Drop Center - Front/Rear - Stainless Steel - 16"FeaturesStrong, quality spoke sets used in stock and custom applicationsAll sets include nipples and spoke...

Drag Specialties - DS380140 - Spoke Set - Drop Center - Front - Chrome - 21"FeaturesStrong, quality spoke sets used in stock and custom applicationsAll sets include nipples and spoke wrench for...

Drag Specialties - DS380132 - Spoke Set - Drop Center Front - Chrome - 7.75" x 18"FeaturesStrong, quality spoke sets used in stock and custom applicationsAll sets include nipples and spoke wrench for...

Drag Specialties - DS380130 - Spoke Set - Drop Center - Front - Chrome - 19"FeaturesStrong, quality spoke sets used in stock and custom applicationsAll sets include nipples and spoke wrench for...

Drag Specialties - DS380120 - Spoke Set - Drop Center - Custom 40-Spoke - Front - Chrome - 21"FeaturesStrong, quality spoke sets used in stock and custom applicationsAll sets include nipples and...

Drag Specialties - DS380101 - Spoke Set - Drop Center - Front/Rear - Chrome - 16"FeaturesStrong, quality spoke sets used in stock and custom applicationsAll sets include nipples and spoke wrench for...

Drag Specialties - DS380057 - Smooth Rear Fender - with Taillight/Turn Signal Mount - SteelFeaturesSteel, one-piece fenders are reproductions of the ones found on 4-speed FL modelsCan also be used as...

Drag Specialties - DS380055 - Smooth Rear Fender - without Taillight/Turn Signal Mount - SteelFeaturesSteel, one-piece fenders are reproductions of the ones found on 4-speed FL modelsCan also be used...

Drag Specialties - DS376601 - Smooth Coil Cover - ChromeFeaturesClean chrome styleCovers coil when mounted in stock locationReplacement Part for OEM Number(s):3160665Specs