1966 Electra Glide FLH

Magnetic drain plug prevents metal particles from circulating. Plug is 1/2" - 20 UNF. Fits:FXST 1984-1986FL 1965-1984FX 1971-1984FXR 1984-1986Additional Information

Raw steel motor mount repair bushing kit has a 3/8" inner diameter and a 1/2" outer diameter. This kit is used to align motor after frame mount repair.Drill a 1/2" hole in motor mount. The 3/8"...

Stainless steel lower fork leg drain plugs. Fits:FL 1949-1976Additional Information UOM5 - PK Manufacturer

Front axle cap cover set includes right and left caps with set screws for glide type forks and anchor stud cap.THis is a three piece set. Fits:FL 1949-1971 front axleAdditional Information

Front axle cap cover set includes right and left caps with a set of screws for glide type forks.Does not include anchor stud cap. Fits:FL 1949-1971Additional Information

Primary cover screw set features a zinc finish. Fits:FL 1965-1975Additional Information UOM1 - SET Manufacture

Transmission drive speedometer cable features cadmium plating and has an outer diameter of 10mm and a length of 35". Cable has a flexible metal housing and a hex nut fitting. Includes 5/8" top nut...

Zinc transmission drive speedometer cable with 5/8" top nut. This cable has an outer diameter of 6.5mm and is 35" long. Cable is constructed of zinc plated flexible metal casing. Fits:FLHS...

Cable kit is for one side with pull throttle. Kit includes all internal parts. Grips are not included. Features a vinyl cable casing. Kit is pull type.*NOTE: Spiral uses 1-1/8" inner diameter grips...

Replica brake cable measures 60" with inner and outer housing. This cable can be cut to desired length. Fits:K 1952-1956FX 1971-1972XL 1957-1972GE 1958-1971FL 1950-1971Additional Information

Zicad transmission drive speedometer cable with 5/8" top nut. This cable has an outer diameter of 10mm and a length of 35". Cable has a zi-cad plated flexible metal housing and a hex nut fitting...

Cable kit is for one side with push throttle. Kit includes all internal parts. Grips are not included. Features a vinyl cable casing.*NOTE: Spiral uses 1-1/8" inner diameter grips on both sides...

Chrome plated transmission drive speedometer cable with 5/8" top nut. This cable has a length of 35" and has a chrome plated flexible metal housing with a hex nut fitting, for the transmission drive...

Front Brake cable is a replacement core and casing. This cab le cable is 60" long and can be cut to proper length. Fits:K 1952-1956FX 1971-1972XL 1957-1972GE 1958-1971FL 1950-1971Additional...

Solid oiled music wires as original for push-pull original 1909-1973 throttle applications.Our inner control cable is manufactured to meet OEM specifications for long lasting durabilty and...

Solid oiled music wires as original for push-pull original 1909-1973 throttle applications.Our inner control cable is manufactured to meet OEM specifications for long lasting durability and...

Outer throttle and spark control casing for inner cable. Fits:FX 1971-1972FL 1949-1972Additional Information OEM No.56528-49

Speedometer cable adapter allows the aftermarket speedometers with a male threaded fitting to be converted to female to accept an original cable.For use with early 1936-1961 cable. Fits:EL...

Speedometer drive unit is 13 tooth with a 2:1 drive ratio.Speedometer drive unit measures: 2.342" shoulder to gear end. Order gasket and screw separately. Fits:FL 1962-1967Additional...

Black transmission drive speedometer female end cable with 5/8" top nut with coarse thread. This cable has a length of 35". Fits:FLHS 1962-1980FX 1971-1972FLH 1962-1980FX 1980-1983Additional...

Chrome brake handle cable kit Fits:FL 1965-1972Additional Information UOM1 - KIT ManufacturerV-Twin

Polished brake handle cable kit is single disc and includes internals and lever assembled. Fits:FL 1965-1972Additional Information UOM1 - KIT

Oiled music wires for push-pull throttle and spark applications. Fits:G 1958-1973FL 1949-1965Additional Information OEM No.56392-49 <

Black vinyl clutch cable feature late style eyelet handle end. This cable has a casing length of 31" for stock mousetrap applications. Fits:FL 1952-1967Additional Information

Zinc brake cable adjuster for the front. Fits:K 1952-1956FX 1971-1972XL 1957-1972FL 1950-1971Additional Information OEM No.451

Chrome brake cable adjuster only for the front. Fits:XL 1952-1972FX 1971-1972FL 1950-1971Additional Information OEM No.45159-50

York 4-speed clutch cable for use with 4-speed kick starter covers.Use with kick starter covers with cable operated ball-ramp clutch release assembly. *NOTE: Uses a small hole perch type handlebar...

4 Tooth fine speedometer drive gear featuring a smaller inner diameter than OE.For use with 2:1 ratio speedometer and drive gear. Fits:FL 1962-1968Additional Information

Petcock screen only, plastic. Fits:FL 1966-1974FX 1971-1974XL 1955-1974Additional Information OEM No.62096-69

Petcock is wing type with zinc finish has a 3/8" NPT and accepts a 5/16" fuel line. Includes screen and 2 handles, sliding control valve with reserve. Fits:FX 1971-1974XL 1955-1974FL...

Shovelhead Keihin carburetor kit includes intake mainfold, insulator spacer, clamp, mount stud and replica Keihin carburetor.*NOTE: Order single throttle calbe and air cleaner and bracket separately...

V-Twin - 35-2030 - 47mm OKO Shorty Carburetor Kit BlackDescriptionBlack performance 47mm shorty carburetor kit will accept S&S bolt pattern air filter assemblies. It has a relocated accelerator pump...

V-Twin - 35-2001 - Linkert Carburetor Float BowlDescriptionLinkert carburetor float bowl fits 1936-up Big Twin overhead valve models. Fits:FL 1936-UPEL 1936-UPE 1936-UPAdditional Information

Black intake manifold clamp set is a two piece o-ring type.*NOTE: Must order o-ring seals separately. Fits:FX 1971-1977FL 1955-1977XL 1955-1977Additional Information

OKO 42mm flatside carburetor kit includes vertical flange adapter, rubber sleeve, air cleaner adapter, lower carburetor stud and strap bracket. *Shown installed on a 1966 flat side Shovelhead.42mm...

This series linker model float/arm set is our exclusive tooling, for exact Replica fit and function. Molded of nitrophyl material which is fuel resistant. Includes the wear block.Sold as a two peice...

Linkert DC carburetor bowl oversize nut kit includes an oversize stainless bowl nut, bowl nut tap, main nozzle, main nozzle tap, oversize gasket and spring. Fits:XL 1957-1966FL 1966-1966Additional...

Linkert DC carburetor bowl nut kit includes a gasket, spring and stainless bowl nut. Fits:XL 1957-1966FL 1966-1966Additional Information OEM No.

Stainless linkert DC carburetor low speed needle valve. Fits:XL 1957-1966FL 1966-1966Additional Information OEM No.27339-57

Stainless linkert DC carburetor high speed needle valve. Fits:XL 1957-1966FL 1966-1966Additional Information OEM No.27297-57