FXR Handlebars & Controls

Accutronix - Black Knurled Diamond Custom Grips for Cable fits HD Models Features Machined from 6061 T-6 Billet Aluminum Left grips are secured with three-screw set, while right grips come with throttle sleeve installed Dual cable...

The Accutronix Custom Grips are a great final touch to your custom bike build. High-quality brass construction Dual cable design Sold in pairs Made in the U.S.A. Fitment: YearMakeModel 2016 - 2017 Harley-Davidson Breakout (EFI)...

Biltwell - 1" Tracker O/S High Slotted Handlebars (1-1/8" Clamping Area) These Tracker O/S High Slotted Handlebars from Biltwell feature a 4" end rise, a 30½" width, a 5" center width and a 2¾" pullback. They are available in your...

Biltwell - AlumiCore Dual Cable Grip Set w/ Throttle Housing Biltwell's AlumiCore Custom Grips are replacements for the stock grips and switch pods on Harley's with dual-cable throttles. They have a clean design and are constructed with CNC'ed billet...

Drag Specialties - 36-1/2" Black Vinyl Idle Cable fits '81-'89 Big Twin, '81-'85 Sportster Models - Alternative Length Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an inner nylon liner...

Drag Specialties - 39-1/2" Black Vinyl Throttle Cable fits '81-'89 Big Twin, '81-'85 Sportster  - Alternative Length Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an inner nylon...

Drag Specialties - 42" Black Vinyl Throttle Cable fits '88-'95 XL Sportster & '90-'95 Big Twin Models - Alternative Length Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an...

Drag Specialties - 48" Black Vinyl Throttle Cable fits '81-'89 Big Twin, 81'-'85 Sportster Models - Alternative Length Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an inner nylon liner...

Drag Specialties - 60-5/8" Black Vinyl High-Efficiency Clutch Cable fits '87-'94 FXR Models - Alternative Length Features: Cables feature chrome fittings, black vinyl outer casings, tempered-steel inner wire and a nylon inner sleeve for smooth...

Drag Specialties Handlebar Riser/Top Clamp Kits for 1" Diameter Clamping Area -1-1/2" Rise Chrome Get the complete set up with the Drag Specialties Handlebar Riser/Top Clamp Kit. Features: Sold as a kit of two risers, one-piece top clamp and all...

Drag Specialties Handlebar Riser/Top Clamp Kits for 1" Diameter Clamping Area - 10" Rise Gloss Black Get the complete set up with the Drag Specialties Handlebar Riser/Top Clamp Kit. Features: Sold as a kit of two risers, one-piece top clamp and all...

Drag Specialties Handlebar Riser/Top Clamp Kits for 1" Diameter Clamping Area - 9-1/2" Rise with 1-1/2" Pullback Chrome Get the complete set up with the Drag Specialties Handlebar Riser/Top Clamp Kit. Features: Sold as a kit of two risers, one-piece...

LA Choppers Kage Fighter 1-1/4" Pullback One Piece Handlebars Chrome These one piece handlebars from LA Choppers are designed for internal wiring, knotched for throttle by wire Harley Davidson Models, and made right here in USA. High-strength steel...

LA Choppers Kage Fighter Pullback Handlebars Flat Black Features High-strength steel tubing construction Accepts stock controls Designed for internal wiring Made in the U.S.A. 8 bolt billet aluminum clamp Multiple riser heights available 3-inch...

Trask Assault Risers for 1"Harley Handlebars These Trask Assault risers are made from billet aluminum right here in the US! Available in black. Adding these risers to you Harley Davidson Motorcycle will sure make it stand out. Features: Made from...

V-Twin - 1" NYC Handlebars W/ Indents These handlebars have a narrow profile for city streets and its threaded mounts are 1/2" x 13" thread. Available in your choice of a black or chrome finish. Fitment Custom Application

Accutronix - 12" Bandit Riser Kit W/O Gauge Mount Adapter (1-1/8" Clamping Area) Available in your choice of a black or chrome finish.  The clamping area on these risers is 1-1/8" | You will need handlebars with a 1-1/8" clamping area to run these...

Biltwell Oversize Murdock Risers fits 1-1/8" Handlebars - Chrome Get that oversize moto look, perfect for the O/S Biltwell Tracker Bars. Please Note: These Biltwell Oversize Murdock Risers are meant to work with the Biltwell O/S Tracker Handlebars...

Drag Specialties - 68-11/16" Black Vinyl High-Efficiency Clutch Cable fits '87-'06 Big Twin/ '86-'13 Sportster Models (Except '06 Dyna Glide) - Alternative Length Features: Cables feature chrome fittings, black vinyl outer casings, tempered-steel...

Drag Specialties - 70-7/16" Black Vinyl High-Efficiency Clutch Cable fits '87-'06 Big Twin/ '86-'13 Sportster Models (Except '06 Dyna Glide) - Alternative Length Features: Cables feature chrome fittings, black vinyl outer casings, tempered-steel...

Drag Specialties - 72-11/16" Black Vinyl High-Efficiency Clutch Cable fits '87-'06 Big Twin, '86-'13 Sportster Models (Except '06 Dyna Glide) - Alternative Length Features: Cables feature chrome fittings, black vinyl outer casings,...

Drag Specialties - 74-11/16" Black Vinyl High-Efficiency Clutch Cable fits '87-'06 Big Twin, '86-'13 Sportster Models (Except '06 Dyna Glide) - Alternative Length Features: Cables feature chrome fittings, black vinyl outer casings, tempered-steel...

Drag Specialties - Front Brake Master Cylinder Assembly - 11/16" Bore - Chrome The Drag Specialties Front Brake Master Cylinder Assembly is a high-quality and durable option for your motorcycle's braking system. With an 11/16" bore, this assembly...

Drag Specialties Handlebar Riser/Top Clamp Kits for 1" Diameter Clamping Area - 9-1/2" Rise with 1-1/2" Pullback Gloss Black Get the complete set up with the Drag Specialties Handlebar Riser/Top Clamp Kit. Features: Sold as a kit of two risers,...

HardDrive - Harley Davidson 1" Knurled Grips (Raw/Cable Throttle) These CNC Machined Grips from Hard Drive are made from 6061 Aluminum or Brass, feature a knurled design, and comes to you in dual cable to fit most Harley Davidson Motorcycles...

Joker Machine Black Fork Tube Turn Signal Clamps for Harley Models These low profile fork tube turn signals are made from some of the best material- 6061 billet aluminum. Easily mounted with the included hardware and available in a black finish. Clean...

LA Choppers Kage Fighter Handlebars Flat Black Features High-strength steel tubing construction Accepts stock controls Designed for internal wiring Made in the U.S.A. 8 bolt billet aluminum clamp Multiple riser heights available 3-inch...

LA Choppers Kage Fighter Handlebars Gloss Black Features High-strength steel tubing construction Accepts stock controls Designed for internal wiring Made in the U.S.A. 8 bolt billet aluminum clamp Multiple riser heights available 3-inch...

LA Choppers Kage Fighter Pullback Handlebars Chrome Experience the perfect blend of durability and style with LA Choppers Kage Fighter Pullback Handlebars in Chrome. These American-made handlebars are constructed from steel tubing and designed to...

Wild 1 Phsycho Street Fighter 12" Handlebars Features: Handlebars are 25% thicker than stock Designed with fluid bends at precise angles for maximum comfort and control Pre-drilled for internal wiring Polished welds/ diamond...

Accutronix - 10" Bandit Riser Kit W/O Gauge Mount Adapter (1-1/8" Clamping Area) Available in your choice of a black or chrome finish.  The clamping area on these risers is 1-1/8" | You will need handlebars with a 1-1/8" clamping area to run these...

The Covington's Customs Handlebar Clamp CNC machined from billet aluminum Covers the entire clamping area Fit 1" handlebars Made in the U.S.A. NOTE: Not for models with gauge-mount indicator light mount attached to the handlebar clamp...

Drag Specialties - 33-3/4" Black Vinyl Throttle Cable fits '86-'87 FXR Models - Alternative Length Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an inner nylon liner for smooth...

Drag Specialties - 58" Black Vinyl Throttle Cable fits '88-'95 XL Sportster & '90-'95 Big Twin Models - Alternative Length Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an...

Drag Specialties - 63-11/16" Black Vinyl High-Efficiency Clutch Cable (Repl. OEM #38606-87A) Features: Cables feature chrome fittings, black vinyl outer casings, tempered-steel inner wire and a nylon inner sleeve for smooth...

Drag Specialties - 80" Black Vinyl High-Efficiency Clutch Cable fits '87-'06 Big Twin, '86-'13 Sportster Models (Except '06 Dyna Glide) W/ 26" Clutch Adjuster - Alternative Length Features: Cables feature chrome fittings, black vinyl outer casings,...

Drag Specialties Handlebar Riser/Top Clamp Kits for 1" Diameter Clamping Area - 3" Rise Chrome Get the complete set up with the Drag Specialties Handlebar Riser/Top Clamp Kit. Features: Sold as a kit of two risers, one-piece top clamp and all...

Drag Specialties Handlebar Riser/Top Clamp Kits for 1" Diameter Clamping Area - 4" Rise Chrome Get the complete set up with the Drag Specialties Handlebar Riser/Top Clamp Kit. Features: Sold as a kit of two risers, one-piece top clamp and all...

Drag Specialties Handlebar Riser/Top Clamp Kits for 1" Diameter Clamping Area - 5-1/2" Rise with 1-1/2" Pullback Gloss Black Get the complete set up with the Drag Specialties Handlebar Riser/Top Clamp Kit. Features: Sold as a kit of two risers,...

HardDrive - Harley Davidson 1" Knurled Grips (Black/Cable Throttle) These CNC Machined Grips from Hard Drive are made from 6061 Aluminum or Brass, feature a knurled design, and comes to you in dual cable to fit most Harley Davidson Motorcycles...