FXR Police FXRPF

Carburetor low speed adjuster screw spring for Keihin carburetor.Sold as a pack of 5. Fits:FXST 1984-1989FLT 1981-1989FXR 1982-1989FLST 1986-1989FL 1981-1984XL 1981-1987FX 1981-1984Additional...

Plug retainer secures connector plug to alternator plug whic h is in the engine case, and prevents faulty contact. Fits:FXR 1982-1988FL 1970-1984FX 1971-1984FXST 1984-1988FLT 1979-1988FLST...

FXR starter roll pin.Sold in a pack of 10. Fits:FXR 1982-1994Additional Information UOM10 - PK Manufactu

V-Twin - 12-1768 - 3/8 inch Ball BearingsDescription3/8" ball bearing set for use with clutch or fork neck cups.Sold as a pack of 10. Fits:FXST 1984-1999FX 1971-1984 oil pump check valveFLT...

Pinion shaft gear spacer is made of nylon. Fits:FXST 1984-1989FX 1971-1984FXR 1982-1989FLST 1986-1989FL 1954-1984FLT 1979-1989Additional Information

Plastic breather valve for Big Twin models. Fits:FX 1977-1984FXD 1977-1998FLST 1977-1998FLT 1977-1998FL 1977-1984FXST 1977-1998FXR 1977-1994Additional Information

Chrome, straight oil fitting has 1/8" NPT male x 1/8" NPT female thread. Fits:FXST 1984-1998FXR 1982-1994FLT 1979-1998EL 1936-1940FL 1941-1984FXD 1991-1998FLST 1986-1998Additional Information

Solenoid roll pin measures 1/2" x 1/8".Fits 1965-1984 FL, 1971-1984 FX, 1984-1988 FXST, 1986-1989 FLST, 1984-1988 FXR solenoids. Fits:FL 1947-1969 distributorAdditional Information

Clutch drum retaining ring. Fits:FLST 1986-1997FXD 1991-1997FXR 1985-1994FLT 1985-1997FXST 1985-1997Additional Information OEM

V-Twin - 12-0952 - Transmission Drive Bearing Snap RingDescriptionTransmission drive bearing snap ring. Fits:FXD 1991-2005FLST 1986-2006FLT 1979-2006FXR 1982-1994XL 1991-UPFXST 1986-2006Additional...

Transmission shifter cam snap ring. Fits:FXD 1991-2005FLST 1986-2006FLT 1979-2006FXR 1982-1994FXST 1986-2006Additional Information

V-Twin - 12-0923 - Clutch Pushrod C Type Snap RingDescriptionClutch pushrod snap ring is C type. Fits:FX 1975-1984FL 1975-1984FXD 1991-2017FLST 1986-2017FXST 1984-2017FLT 1984-UPFXR...

Sifton belt drive super nut with built in seal for 4th gear mainshaft surfaces. Fits:UL 1937-1948FLST 1986-1990FLT 1984-1990FXST 1984-1990FX 1971-1984EL 1936-1940FL 1941-1984FXR 1984-1990Additional...

Horn mount nut. Fits:FXR 1982-1994FXST 1984-1985FL 1965-1984FX 1971-1984Additional Information OEM No.69149-65

Key for oil pump scavenger gear. Fits:FL 1971-1984FXR 1982-1990FX 1971-1984Additional Information OEM No.26348-15

Pinion gear shaft key is gear side, semi-circle style. Fits:FXR 1982-1990FLST 1986-1990FXST 1984-1990FX 1971-1984FL 1954-1984FLT 1979-1990Additional Information

V-Twin - 12-0158 - 3/8 inch Ball BearingsDescription3/8" ball bearing set for use with clutch or fork neck cups.Sold as a pack of 25. Fits:FXST 1984-1999FX 1971-1984 oil pump check valveFLT...

V-Twin - 12-0129 - 3/8 inch Ball BearingsDescription3/8" nylon ball bearings. Fits:FXST 1984-1999XL 1957-UPFXD 1991-1999FLST 1986-1999FX 1971-1984FL 1941-1984FXR 1984-1994Additional Information

Replica 80" front or rear Evolution cylinder is sold each. Cylinder has a natural finish.Piston and rings are not included. Fits:FXST 1984-1998FLT 1984-1998FXD 1991-1998FXR 1984-1994FLST...

Includes new rods, 2 hole crank pin, nuts, copper plated steel cages and standard rollers fitted and assembled.Piston pin bushings are installed and must be honed for stock wrist pin. Fits:FXST...

Evolution cam cover trim feature an alloy construction. Bolts to stock cam cover on 1986-99 Big Twin models to give the early Shovelhead Flatside style, cover is natural cast for original style...

Bolt-on 4-finned cam cover kit for Evolution models to give it a Retro-style Panhead look!Kit includes a chrome forged aluminum 4-finned cam cover with bushings installed, cast aluminum cam cover...

Bolt-on cam cover kit for Evolution models to give it the Retro-style 1965 Panhead look.Kit includes a replica cast cam cover flatstide style with bushings installed, cast aluminum cam cover adapter...

Cast aluminum cam cover dress up adapter trim allows use of the early retro-style Panhead cam cover to fit Evolution models.Mounts to existing nose cone cover. *NOTE: Actual cam cover not included...

Kit includes Andrews EV13 cam.Includes oil pump snap rings, pinion shaft key, Sifton pinion gear set, Sifton cam chest steel breather, cam chest breather valve washer, .055 cam bearing washer, cam...

Oil pump check and relief valve plug with a chrome finish. Fits:FLT 1981-1998FXST 1984-1998FXR 1982-1994FXD 1991-1998FL 1981-1984FLST 1986-1998FX 1981-1984Additional Information

Hex type shifter bracket bolt kit with a parkerized finish. Fits:FXST 1984-1999FLT 1980-1986FXR 1982-1994FLST 1986-1999FX 1971-1984FL 1936-1984Additional Information

Chrome allen screw kit for primary cover. Fits:FLT 1985-1999FXR 1985-1994Additional Information UOM1 - KIT

Transmission shifter cover screw, allen type. Fits:FLT 1987-1999FXR 1987-1994FLST 1987-1999FXST 1987-1999Additional Information UOM

Rear engine mount cover. Fits:FXR 1987-1995FLT 1987-1995Additional Information UOM1 - EA Manufacturer

Lower shock stud kit includes 2 nugget nuts and 2 studs. Fits:FXRS 1982-1994FXR 1982-1994Additional Information OEM No.1614

V-Twin - 54-0421 - Chrome Shock Stud Washers 1/2 inch HoleDescriptionChrome 1/2" hole x 1" flat shock stud washers Fits:FLT 1997-UPFXR 1982-1994FL 1965-1984FX 1971-1984XL 1975-UPFXD...

Dry charged 12 volt battery and requires filling with electrolyte acid available from your local auto parts store.Not maintenance free. Battery is shipped dry without acid. Battery is lead/acid type...

V-Twin - 52-2033 - 17 inch x 4.5 inch Rear Spoke WheelDescription17" X 4.5" Replica rear wheel features a chrome rim, 40 chrome spokes and a chrome hub.FXR applications must use seal spacers. Uses a...

Wheel features a 16" x 3.00" black rim, chrome hub with internals and 40 chrome spokes.The flange of the hub measure 7" between each other. *NOTE: 32mm on the pulley side, valve stem side. 27mm...

21" X 2.15" front single or dual wheel includes a chrome hub 40 chrome twirled spokes and a chrome drop center rim assembled. Rim has a rolled edge design for added strength.NOTE: All spokes on wheel...

Rear wheel assembly features a 40 hole 16" x 4" chrome rim, 40 stainless spokes and a chrome rear hub with bearings installed. Wheel is laced and trued.Accepts a 150-160 tire size. Deluxe rim is OE...

Rear wheel assembliy features a 40 hole 16" x 4" chrome rim, 40 chrome spokes and a chrome rear hub with bearings installed. Wheel is laced and trued.Accepts a 130-140 tire size. The inner bearing...

This 21" x 3.25" front wheel features a chrome hub with all internal bearings installed, 40 chrome spokes, and a chrome rim.NOTE: All spokes on wheel need to be inspected and re-torqued after 500 ...

Rear wheel assembly features a 40 hole 16" x 3" chrome rim, 40 polished stainless steel spokes and a chrome rear hub. Wheel is laced and trued.*NOTE: 32mm on the pulley side, valve stem side. 27mm...