FXR Police FXRPF

V-Twin - 34-1804 - Panhead Phillips Screw Set Zinc PlatedDescriptionZinc plated Panhead Phillips 3 piece screw set measures 1/4"-20 x 5/8". Fits:FLST 1993-2007XL 1988-UPFXST 1993-2007FLT 1993-2007FXR...

V-Twin - 34-1803 - Panhead Phillips Screw Set Zinc PlatedDescriptionZinc plated Panhead Phillips 3 piece screw set measures M6 x 1 x 16mm. Fits:FLST 1993-2007XL 1988-UPFXST 1993-2007FLT 1993-2007FXR...

V-Twin - 34-1802 - CV Air Cleaner Mount KitDescriptionCV air cleaner mount kit includes three M6 x 1 x 16mm screws, three 1/4-20 x 5/8", three 1/4" biter washers and a gasket.Screws have a M-6 or ¼ x...

Chrome velocity stack short style with 35mm tall and 90mm diameter at the bell end. Counter bored for screen, includes stainless steel screw. for CV carburetors. Fits:FXD 1993-2006FXR 1993-2006FLT...

Kit includes a tapered style air filter with a chrome cover, and a side band with holes.Must be adjusted and assembled. Fits:FLT 1992-1999FXST 1992-1999FXD 1992-1999FXR 1992-1994FLST...

FXR horn kit includes bracket to mount horn to top motor mount. Kit includes chrome bracket, chrome cover, 12 volt black horn and hardware.*NOTE: Horn body must be grounded after mounting. Fits:FXR...

FXR horn kit includes a black OE type horn and chrome bracket. Horn mounts to battery box underneath the seat. Horn does not accept a cover. Fits:FXR 1982-1994Additional Information

V-Twin - 33-2257 - Indicator Lamp Neutral Type GreenDescriptionGrean neutral indicator lamp, with a chrome bezel, is for 5/16" holes.This is a stock replacement and will fit most aftermarket brackets...

Lay down tail lamp with bracket features a red LED lens.*NOTE: For show or decorative use only and is not D.O.T. approved. Fits:XL 1973-1998FXR 1982-1994FX 1973-1984FXD 1991-1998FL...

Chrome red noid style LED lamp with laydown plate frame.*NOTE: For show or decorative use only and are not D.O.T. approved. Fits:FXST 1984-1998XL 1973-1998FXR 1982-1994FX 1973-1984FXD 1991-1998FL...

Chrome laydown deco tail lamp kit includes lamp and die cast license plate holder with rubber mount block mounts. Fits:FXR 1982-1994FX 1973-1984FXD 1991-1998FL 1973-1984XL 1991-1998Additional...

Chrome die cast kit includes license plate bracket and chrome plated steel adapter. Fits:XL 1973-1998FXR 1982-1994FX 1973-1984FXD 1991-1998FL 1973-1984Additional Information

V-Fire ignition kit is single fire and can be set for street or race, electric or kick starter and includes rear cylinder timing adjustment for rate of advance. Kit includes coil, 8.5mm wires, sensor...

V-Fire ignition kit is single fire and can be set for street or race, electric or kick starter, and includes rear cylinder timing adjustment for rate of advance.Ignition kit fits all 1970-1998...

Headlamp wiring harness bushing is straight type. Fits:FXR 1982-1994FX 1974-1984XL 1974-1994Additional Information OEM No.72501-74

Ignition sensor cup screw with washer.Sold in a pack of 10. *NOTE: Not for sale in California. Fits:FXST 1984-1999FXD 1991-1999FXR 1982-1994FLST 1986-1999FL 1982-1984XL 1982-1999FLT...

Replacement starter drive clutch assembly. Fits:FXD 1991-2005FLT 1991-2006XL 1991-2006FXST 1991-2006FLST 1991-2006FXR 1991-1994Additional Information

V-Twin - 32-2051 - OE Long Reach Factory Spark PlugDescriptionOE long reach factory plug plug features copper coated electrodes for foul resistance. Fits:FXST 1984-1998FX 1975-1981FLT 1984-1998FXS...

V-Twin - 32-1913 - Single Fire IgnitionDescriptionSingle fire ignition fires the front and rear cylinders independently of each other, which allows accurate timing of each cylinder.Stock ignition...

V-Fire single fire ignition kit includes a V-Fire single fire ignition kit with a chrome 12 volt coil.Mounts to stock bracket and accepts stock type coil covers. Works with most aftermarket single...

V-Fire dual fire ignition kit includes a V-Fire dual fire ignition kit with a black 12 volt coil.Includes a mechanical advance unit and all hardware. *NOTE: Dual fire is where there are two sparks at...

Main wiring harness kit features plastic wire in original factory color codes, with all terminals applied in vinyl loom.Handlebar and tail lamp wiring must be purchased separately. Fits:FXRS...

V-Fire ignition kit is single fire and includes mechanical advance unit, hardware, and wiring instructions.Black wire is for the front and the white wire is for the rear. Order coil separately...

V-Fire dual fire ignition kit includes a mechanical advance unit and all hardware.Ignition kit is dual fire where there are two sparks at the same time. Critical wiring instructions are included...

Battery cable for ground on FXST, FLST and positive on FXR.PVC plastic coated cable replaces original with heat shielded terminal ends. Fits:FXR 1993-1994FLST 1989-2007FXST 1989-2007Additional...

Battery cable measures 8-1/2" long. Cable is 4 gauge with 17/64" and 11/32" hole sizes with heat shielded terminal ends.Cable is braided. Fits:FXR 1987-1994FLT 1982-1992Additional Information

Rear 3-1/2" long threaded stud is hollow for wiring.. Fits:FXR 1987-1994Additional Information OEM No.68493-87

V-Twin - 31-9935 - Front Turn Signal Relocation KitDescriptionChrome front relocation kit will move turn signals to post mounted to top of triple tree. Chrome mount posts, wiring and hardware,...

V-Twin - 31-4072 - Turn Signal Front SupportDescriptionSupport for the turn signal on the front of a XL models. Fits:XL 1988-UPFXDS 1994-2000FXR 1988-1994Additional Information

V-Twin - 31-4067 - Front Turn Signal Ball StudDescriptionBall stud set is for front turn signal.Sold in a quantity of 2. Fits:XL 1988-UPFXD 1991-2017FXR 1988-1994Additional Information

Chrome long rear seat tab when installing a 1 piece seat. Fits:FXR 1982-1994XL 1979-1996Additional Information OEM No.51651-79

Black spring mount bracket for mounting FXRP police solo seat to FXR frames. Includes two u-clamps for clamping to the frame.The coil springs mount to this bracket, which are available separately...

V-Twin - 31-3943 - License Plate Frame Bracket Kit ChromeDescriptionChrome fender mount 3-hole bracket kit includes a rubber anti-vibration block to cushion it against the fender. Also mounts to...

FXRP seat T bar features a black finish. Fits:FXR 1981-1994Additional Information OEM No.52258-86 UOM

V-Twin - 31-1983 - Chrome Engine StabilizerDescriptionChrome Velva Ride engine stabilizer features a steel body with plunger and urethane dampener that creates a mini shock absorber. Fits:FXR...

FXR seat hinge and latch kit. Fits:FXR 1982-1994Additional Information OEM No.52235-82 UOM1 - KIT

Black rear pipe bracket for FXR models is the bolt on style.The bracket is laser cut from .188" of OEM #75234-88, using thicker material and adding press brake bends at angle to match stock frame...

V-Twin - 31-1644 - Turn Signal Swivel Assembly Kit ChromeDescriptionChrome turn signal swivel assembly kit is a durable replacement for the stock zinc plated accessories.Includes all necessary...

ISO front engine mount is constructed of polyurethane and heat treated material. Fits:FXR 1982-1994FXR 1982-1984FLT 1979-2007Additional Information

CV carburetor support bracket features a zinc plated finish.Can be used when mounting brackets to air cleaner backing plate is not an option, such as installing a Velocity stack or a small diameter...