FXR Police FXRPF

Footpeg male bolt kit includes standard hex bolt and nyloc nut. 4 piece kit is zinc plated.Hex bolts are 3/8"-16 X 1-1/2". Nyloc nuts are 3/8 x 16. Fits:FXR 1982-1994XL 1969-1984Additional Information

Chrome engine mount bolt set. Fits:FLT 1989-1999FXR 1989-1994Additional Information UOM1 - KIT Manufa

Chrome rocker box cover collar and screw kit includes sealing washer with built in o-ring for position seal. Fits:FXST 1984-1998FLT 1984-1998FXD 1991-1998FXR 1984-1994FLST 1986-1998Additional...

Kickstand pin features a chrome finish. Fits:FXR 1991-1994Additional Information OEM No.50009-91 UOM1

Chrome front axle cap cover set is cap style. Includes right and left caps with set screws for glide type forks.Sold as a pair. Fits:FXDWG 1993-2005FLST 1986-2006FXST 1984-2006FLT 1980-1984FLT...

Rear sprocket bolt kit for steel flanged hubs includes a wrench, 5 - 7/16"-14 x 1-1/2" bolts and 5 nyloc nuts in a chrome finish. Fits:FLST 1985-1999FXST 1985-1999FXR 1985-1999Additional Information

Clutch cable in braided stainless steel with clear coat fits FXLR models.Stainless steel braided with clear coat clutch cable has a PVC sleeve. The braid is tightly woven for a bright, quality...

Clutch cable in braided stainless steel with clear coat fits FXR models.Stainless steel braided with clear coat clutch cable has a PVC sleeve. The braid is tightly woven for a bright, quality...

V-Twin clear coated stainless steel clutch cable with a 64.75" casing length. Fits:FXR 1987-1994Additional Information OEM No.38606-87

Left side speedometer drive is for 2240:60 ratio and front wheel only.Speedometer drive has a .750 axle hole. Spacer is .321 wide and .938 overall width. Fits:FXR 1987-1994Additional Information

Braided stainless steel throttle and idle cable has a 34" casing. Throttle cable is 39.375" overall length. Idle cable is 38.625" overall length. Fits:XL 1990-1995FXST 1990-1995FXD 1980-1995FXSTC...

Barnett clear coated stainless steel throttle cable set includes the throttle and idle cables. Throttle has a 43.50" casing and idle has a 43.875" casing length.Cables are 8" extended over stock...

V-Twin - 36-0809 - Choke Cable Assembly KitDescriptionChoke cable assembly kit with the CV carburetor top mount bracket to relocate the choke assembly cable, includes the knob, casing and inner wire...

Left side speedometer drive is for a speedometer with a 2240:60 ratio.Speedometer drive unit has an .750 axle hole, and includes a .361 wide spacer with an overall length of .940. Fits:FXR...

Black front wheel drive speedometer cable with 16mm top nut with fine threads. This cable has a length of 40". Fits:FXR 1987-1993XLH1100 1986-1987XLH 1984-1987Additional Information

Black front wheel drive speedometer cable with 16mm top nut. This 42" long, cable is 2" over stock. Fits:FXR 1987-1993XLH1100 1986-1987XLH 1984-1987Additional Information <

V-Twin - 36-0555 - Carburetor Choke Knob Insert PolishedDescriptionCarburetor choke knob insert is polished stainless steel. Fits:XL 1988-UPFXST 1990-UPFLT 1993-2006FXD 1993-2017FLST 1990-UPFXR...

Black clutch cable feature heavy duty construction designed for reliability and longer service. This cable has a casing length of 31" for stock mousetrap applications. Fits:FLST 1986-1997FXR...

Dual handlebar throttle cable assembly with black grips. The length is 33-1/2" and length with travel is 38-1/2". Fits:FLT 1991-1995FLST 1991-1995FXST 1991-1995FXD 1991-1995XL 1991-1995FXR...

OKO 45mm flatslide carburetor incluldes an enricher, idle adjustment cables, air cleaner adapter ring and choke cable, as shown. Features a natural finish.Includes air cleaner adapter plate. *NOTE:...

OKO 42mm flatslide carburetor includes the choke cable as shown, and features a natural finish.Includes enricher, idle adjustment cables, air cleaner flange mount, and air cleaner adapter plate. Uses...

Carburetor breather manifold kit fits custom air cleaners to motors with the internal breathing system, and features a chrome finish.Kit includes chrome breather manifold,chrome banjo bolts, chrome...

CV carburetor float for 40mm CV carburetors. Fits:FXST 1992-2006FXR 1992-1994FLST 1992-2006XL 1992-2006FXD 1992-2006FLT 1992-2006Additional Information

Natural alloy petcock has a 90  left outlet, nut, nylon filter, screen, washer, rubber gasket and reserve position.For use with stock gas tanks or custom tanks with a 22mm outside thread. Designs are...

Natural alloy petcock has straight outlet with nut and includes nylon filter screen, washer and reserve position.For use with stock gas tanks or custom tanks with a 22mm outside thread. Designs are...

Replica intake manifolds are of cast alloy spigot type. Fits:FXD 1991-1999FXST 1990-1999FXR 1990-1994FLST 1990-1999FLT 1990-1999Additional Information

Alloy petcock with 90  right outlet and reserve position includes nut.For use with stock gas tanks or custom tanks with a 22mm outside thread. Designs are made for a seated position on the motorcycle...

Intake manifold coupler clamp set. Fits:FLT 1986-1999FXD 1991-1999FLST 1986-1999XL 1988-2006FXR 1986-1994FXST 1986-1999Additional Information

CV carburetor main jet assortment for the Kinetic-Karb tuner kit includes 5 of each jet from 1.40-2.05 in increments of .05.Jets are for use in stock CV carburetors or in combination with the...

Kinetic-Karb CV carburetor tuner kit is for Keihin constant velocity carburetors to permit easy tuning after installation of custom air cleaners, cams, and exhaust for cabureted models.Carburetor...

Chrome intake manifold flange set. Fits:FLT 1986-1999FXD 1991-1999FLST 1986-1999XL 1988-2006FXR 1986-1994FXST 1986-1999Additional Information

40mm CV carburetor features a black finish and is without accessories.The main jet installed is #190. Carburetor includes bracket for dual push-pull throttle...

V-Twin - 35-0791 - Breather Bolt Set ChromeDescriptionChrome breather bolt set. Bolt has a 1/2 X 13 thread and are 1-3/4" long.Bolt location, center to center, on Big Twin models is 15cm. Fits:FXD...

Kit includes brass jets and instructions designed specifically for each model listed. The kit features "No Drilling" installation and will work on stock to heavily modified engines. Fits:FLT...

V-Twin - 35-0731 - Breather Banjo Bolt Set ChromeDescriptionChrome breather banjo bolt Set has a 1/2"-13 thread.Bolt location, center to center, on Big Twin models is 15cm. Fits:FXD 1992-1998FLST...

Chrome hex petcock is rear facing and is constructed of forged brass with screen. Includes a 22mm nut for attaching male fitting on fuel tank.Designs are made for a seated position on the motorcycle...

Chrome hex petcock is down facing and is constructed of forged brass with screen. Features 3/8" National Pipe Thread brass hose spigot with nut.Designs are made for a seated position on the...

Chrome notch petcock with angle fitting and knob, features a 360  swivel high capacity elbow and includes a straight fitting, full reserve and lever control for on/off and reserve.Petcock features an...

Chrome hex petcock is down facing and is constructed of forged brass with screen. Features 3/16" National Pipe Thread brass hose spigot with nut.Designs are made for a seated position on the...

Chrome hex petcock has inward facing outlet and is constructed of forged brass with screen. Features 5/16" National Pipe Thread brass hose spigot with nut.Designs are made for a seated position on...