Harley Davidson

TC Bros. Choppers bolt on forward controls kit to fit all 883 and 1200 models of Harley Davidson Sportster 5 speed from 1991-2003. Kit features CNC machined 6061 aluminum folding footpegs with a knurled, non slip finish for great looks and performance...

Burly Brand - Long Black Sissy Bar fits '04-'17 Harley XL Sportster Looking for a sissy bar with some back support? The Bury brand long sissy bar comes equipped with a backrest pad to keep your passenger comfortable on your next motorcycle adventure...

Burly Brand - Short Black Sissy Bar fits '04-'18 Harley XL Sportster Classic-styled, one-piece sissy bar Sturdy, TIG-welded steel construction Mount to outside of fender rails for easy installation and removal Available in black powdercoat or...

S&S - Stealth Air Cleaner Kit fits '91-'06 XL Sportster For stock and S&S fuel system applications Kits include backing plate, filter and hardware Built-in stinger cone direct air smoothly into the bore of the carburetor or EFI throttle body...

Burly Brand - Lite Clutch Fits: '00-'12 FXST, FLH , FLT, FXD , '08 -' 11 FXCW/C The Burley Brand Lite Clutch reduces effort required to pull clutch lever by 40%, which lessens rider fatigue and provides smoother, easier clutch action. Ideal for women...

Burly Brand - Lite Clutch Fits:'87 - '99 FX / FLST, FLT, FLHT, FLHS,FLHR, '91-'99 FXD The Burly Brand Lite Clutch reduces effort required to pull clutch lever by 40%, which lessens rider fatigue and provides smoother, easier clutch action. Ideal for...

Burly Brand - Lite Clutch fits: Sportster '86 - '93 The Burly Brand Lite Clutch reduces effort required to pull clutch lever by 40%, which lessens rider fatigue and provides smoother, easier clutch action. Ideal for women riders, or stop-and-go traffic...

Converts stock diaphragm spring to coil spring Increase tunability of clutch More positive linear clutch action Fits : '98 - '13 Big Twin

Belt Drives Ltd. - BTX-14 Clutch Plate Kit Kit fits '98- '17 Big Twin Plates measure 25% wider than the OEM plates for a significant increase in the clutch area Stack height is pre-set for easy installation Can be used in wet or dry clutches Made...

Belt Drives Ltd. - Kevlar Clutch Kit fits: L'84 - '89 Big Twin Clutch plates are made of 6061-T6 or high tempered steel with Belt Drives Ltd. race proven kevlar material. Each plate design was tested so that the maximum performance is achieved...

Belt Drives Ltd. - Kevlar Clutch Kit fits:'68 - 'E84 Big Twins Clutch plates are made of 6061-T6 or high tempered steel with Belt Drives Ltd. race proven kevlar material. Each plate design was tested so that the maximum performance is achieved...

V-Twin Mini Seat Shock Dual Mount This seat shock mount kit should be used with dual mini shocks. Kit includes 1 seat bracket, 2 lower brackets, 4 socket cap bolts, 4 lock washers, 4 flexloc nuts, and 8 washers. Brackets are black, hardware are chrome...

V-Twin Mini Seat Mounting Shock 5" This V-Twin mini mounting shock is 5" long with exposed spring. Fits: Custom application

V-Twin Sportster Style Tank 2.4 Gallon Gas - Frisco Strap Mounts This V-Twin Sportster style tank with frisco strap mounts has a left side petcock opening, and a fuel capacity of 2.4 gallons. It features a four bolt mount strap system to be welded onto...

V-Twin Chopper Style Gas Tank 2.5 Gallon - Screw-In Style Cap This V-Twin chopper style gas tank has a 2.5 gallon capacity and features a screw-in style forward and high gas cap opening. The front edge to the mounting holes measures 15", the front...

V-Twin Prism Style Gas Tank 2.2 Gallon This V-Twin Prism gas tank has a 9/16"-18 left side petcock opening and a fuel capacity of 2.2 gallons. It features four bolt mounting with a strap type mounting system included. Fits: Custom...

V-Twin Coffin Style Gas Tank  2.2 Gallon This V-Twin Coffin Style 2.2 gallon gas tank accepts a left or right side 1/4" National Pipe Thread petcock, and has a fuel capacity of 2.2 gallons. It has a single front tab and a rear U-bracket...

V-Twin Coffin Style Gas Tank 3.4 Gallon The V-Twin 3.4 gallon Coffin Style tank. This gas tank accepts a left side petcock with a 3/8" National Pipe Thread. Fuel capacity is 3.4 gallons. Tank features ISO mount strap system. Fits: Custom...

V-Twin Saga Gas Tank 3 Gallon - Bung Style Features: right side petcock opening. dished teardrop pop out sides fuel capacity of 3.0 gallons. uses a bung style cap which is not included. End to end of mounting tabs measures 19-7/8 Accepts 3/8"...

V-Twin Fat Bob Steel Rear Fender - Right Side Chain Relief Bobbed rear fender for rigid models has a raw finish with a right side relief for the chain (right side of the bike while on the bike facing handlebars). Measurements: 7-1/4" wide and 5-1/5"...

V-Twin Axed Gas Tank 3.3 Gallon - Screw in Style Bung Gas tank is a chopper axed gas tank. It has a right side petcock opening, and fuel capacity of 3.3 gallons. The tank features a screw type bung. It features a 3/8" NPT outlet with 2 x 1/4" cross...

V-Twin Peanut Gas Tank 2.0 Gallon - Single Bayonet Style Cap Gas tank has a fuel capacity of 2.0 gallons. Tank is a single cap design with front and rear saddle style brackets to fit 1-1/2" frame tubing. It can be bolted or clamped in place. Tank...

V-Twin Captain America Gas Tank 2.2 Gallon - Single Bayonet Style Cap Replica gas tank has two 1/4" National Pipe Thread petcock outlets, and a fuel capacity of 2.2 gallons. This Captain America tank has straight mount tabs on the front and rear, and a...

V-Twin Steel Rear Fender 6" Round Profile - Raw Smooth round profile chopper fender has a thickness of 1.05 mm. Fits: Custom application

V-Twin Sportster Replica Gas Tank 2.4 Gallon - Single Bayonet Style Cap OEM No: 61044-75 Replica gas tank is single cap style with a fuel capacity of 2.4 gallons, and a right side petcock location. The tank is a stock styled high tunnel tank that...

V-Twin Upsweep Exhaust Header Set 1-3/4" - fits '86-'94 FXST Chrome upsweep drag header set has a diameter of 1-3/4" and will accept straight or fishtail extensions or mufflers. Mounts sold separate. Fits: FXST 1986-1994 Evolution

V-Twin Weld On Kickstand Assembly for 1-3/8" Frame Tubing - Chrome Weld-on kickstand assembly features a chrome stand with hidden spring. Fits 1-3/8" tube. Fits: Custom application for 1-3/8" frame tube.

V-Twin Weld On Kickstand Assembly for 1-1/4" Frame Tubing - Chrome Weld-on kickstand assembly includes an internal spring. Fits: Custom application for 1-1/4" tube

V-Twin Weld On Kickstand Assembly for 1-1/8" Frame Tubing - Chrome Weld-on kickstand assembly includes mount, kickstand, and spring and pin kit. Fits: Custom application for 1-1/8" frame tube

V-Twin Jockey Shifter Control Kit Police Style - fits '79-'84 FL Police style jockey shift kit clamps to all front 1-1/8" down tubes for 4-speed rotary top. Kit includes a smooth gate without dents. This is an offset handle for use with 5 gallon bobbed...

The Burly Brand high performance suspension preload adjuster for 1988-2014 Sportsters, 91-2005 Dyna (39mm forks) and 2006-2014 Dyna models (49mm forks). Easily tune your front suspension to suit your weight and riding style. Simple installation...

V-Twin Exhaust Drag Pipe Kit Black Ex. Wrap Slash Cut Ends - fits XL Sportster '86-'03 Chrome 1-3/4" drag pipe set with slash cut ends are 38" long . Pipes mount with stock brackets. Kit includes self lock tie wraps and black exhaust wrap...

V-Twin Throttle Assembly 7/8" Bars Kit includes: 7/8 twist grip, right and left cushion grip, and a 60" universal throttle cable. Measurements: Inner diameter of the nut on the throttle housing where the cable attaches is 1/4

Performance Machine - Harley Davidson Elite Dual Cable Grips Ditch your stock grips and upgrade to the Performance Machine Elite Grips! These grips are durable and feature knurled rubber sleeves with an embossed PM logo wrapped around machined billet...

V-Twin Hand Control Kit Black  9/16" Bore Master Cylinder Old school black hand lever assembly includes clutch and brake. Master cylinder is 9/16" bore for single caliper use. Fits: Custom application

    •    High performance with an aggressive look    •    New performance product range tailored to Harley Davidson and metric cruisers    •  ...

V-Twin Z Style Handlebars - Chrome 1" Harley Davidson Chrome 1" Z Style Handlebar 4" Rise Chopper Bobber Custom Features:  Chrome 1" handlebar are Z style that feature early chopper styling with indents. Handlebars do not have knurls...

V-Twin Internal Throttle for 1" Handlebar Internal Throttle 1" Handlebar Harley Davidson Chopper Bobber Custom Motorcycle Features: V-Twin Radii internal throttle sleeve allows you to hide the throttle cable inside the bars for a clean sleek look...

V-Twin Alloy Velocity Stack S&S Super E and G Carburetor 4" - Chrome Features:   Chrome 4" alloy velocity stack is for S&S Super "E" and "G" carburetors.  Fits: Custom application for S&S Super E and G

V-Twin Dog Bone Riser Set 4" - Chrome Cast 4" dog bone riser set features polished chrome plating over solid brass. Set of two. Fits: Custom application