Harley Davidson

Jims - 34731-84 Valve Guide Installer fits all Evolution & '99-'04 Twin Cam Models (OEM #34731-84) Features: Available from JIMS to allow the proper removal or installation of shoulderless valve guides as well as valve seals Made in the U.S.A...

Jims - 1007 Blue Motor Stand fits '57-'03 Sportster, '94-'02 Buell Models (Except Blast) Features: Makes working on motors easier with better access Made in the USA

Jims - 1047-TP Crank Assembly Removal Tool fits '55-'06 Big Twin Models (Except '06 Dyna) Features: This tool can only be used for removing the flywheel from the left case Will also press cases apart and break sealant bond Some case pressing will...

Jims - 1013-54TB Pin Bushing Installer fits '54-'92 Big Twin Models (OEM #25582-54/73) Features: Use to install bushing and drill dowel pin hole to factory specification #31 jobber length HSS drill bit included with jigs Use staking dowel pin Made...

Jims - 1017-37TB Cam Bushing Installer fits '37-'48 Big Twin Side-Valve Motors, '54-'20 Sportster, '91-'09 Buell Models (Except 1125R) Features: Use to install bushing and drill dowel pin hole to factory specification #31 jobber length HSS drill bit...

Jims - 1030-TS Crank Pin Flywheel Socket fits 'L83-'99 Big Twin Models (OEM #23969-83) Features: Machined for 100% nut-to-socket and drive-end contact Eliminate nut rounding and risk of injury Made in the U.S.A...

Jims - 33071-73 Bearing Race Remover and Installer fits '73-'99 Big Twin, Sportster & Buell Wheels Features: Designed to remove and install bearing cups in cast wheels Use with JIMS® Handle Fitment 1999 Harley-Davidson Super...

Jims - 94660-37A Counter Shaft Sprocket Locknut Wrench fits '36-'06 Big Twin Models (Except '06 Dyna) Features: Removes hex nut from end of main drive gear that secures the rear drive transmission pulley Extra-long two-piece design Made in the...

Jims - 95760-TB Puller Camshaft Bearing fits '58-'99 Big Twin Models (Except Twin Cam) Features: Used to remove inner cam bearing without damaging the crankcase Tool is also designed to keep rollers from falling into the crankcase Comes with...

Jims - 95760-TP Pinion Bearing Puller fits '54-'99 Big Twin Models Features: Use to remove pinion bushing from cam cover in one easy operation Use with JIMS® Cam Cover Holder Made in the U.S.A. Fitment 2000 Harley-Davidson FXR...

Jims - 95960-52C Clutch Hub Puller fits '36-'90 Big Twin Models Features: Used to remove wet and dry clutch hubs without removing clutch release rod 4 bolts included for dry clutch removal Made in the U.S.A...

Jims - 96385-78A 4-Speed Shift Fork Gauge fits '79-'85 Big Twin Models Features: This tool checks alignment of Big Twin transmission shift forks Made in the U.S.A. Fitment 1984 Harley-Davidson Electra Glide Special...

Jims - 96384-39 Shift Fork Gauge fits '39-'78 Big Twin Models Features: This tool checks alignment of Big Twin transmission shift forks Made in the U.S.A. Fitment 1978 Harley-Davidson Electra Glide...

Jims - 96780-58A Piston Pin Lock Ring Tool fits Pre-'73 Big Twin & Sportster Models w/ 0.515” ID Wrist Pins Features: Use to install lock ring (Harley-Davidson® No. 22582-52) in piston having .515” inner diameter wrist pins, like...

Jims - 94557-55A Compensating Sprocket Socket Head fits '55-'70 Big Twin & Sportster Models Features: Used to remove and install compensating nut Made in the U.S.A. Fitment 1965-1970 Harley-Davidson Electra Glide...

Jims - 1051 Wrist Pin Bushing Tool fits '99-'06 Twin Cam Models Features: Used to remove and install wrist pin bushings without removing connecting rods from crankcases Comes with instructions Made in the U.S.A...

Jims - 1283 Camshaft Chain Tensioner Tool fits '99-'06 Twin Cam Models (Except '06 Dyna) Features: Designed to unload the pressure on the primary and secondary chain tensioners to assemble and disassemble cams Also checks spring loads on chain...

LA Choppers - Pinned Hefty Top Clamp fits '99-'23 Big Twin Models w/ 3-1/2 ” on Center Risers & Offset Mounting Holes Features: Fits Hefty handlebars and risers Polished aluminum construction Pinned to prevent movement of handlebars Made...

Custom Cycle Engineering - 47 mm Ultra Chrome 20.88" Fork Tubes fits '21-'24 RA1250/​RA1250S Models (OEM #455005-85) Features: Excellent high-luster mirror finish with the durability of hard chrome Lengths given may not be the exact OEM length Made...

Custom Cycle Engineering - 49 mm Black 28.50" Fork Tubes fits '16-'22 XL1200X/1200XS Models Features: Black Diamond-like carbon coating Lengths given for OEM replacements may not be the exact OEM length Made in the U.S...

Custom Cycle Engineering - 49 mm Hard Chrome Standard 25.875" Fork Tubes fits '18-'23 FLFB/​FLFBS Models Features: Finish is electrolyzed for increased hardness of 55-60 Rockwell Increased hardness for better long-lasting corrosion...

Custom Cycle Engineering - 49 mm Ultra Chrome Fork Tubes fits '18-'23 FLFB/FLFBS Models (OEM #455004-60) Features: Designed to fit a wide variety of models Made in the U.S.A Lengths given for OEM replacements may not be the exact OEM...

Custom Cycle Engineering - 49 mm Ultra Chrome Fork Tubes fits '17-'23 Touring Models (OEM #455003-41) Features: Designed to fit a wide variety of models Made in the U.S.A Lengths given for OEM replacements may not be the exact OEM...

Custom Cycle Engineering - 49 mm Ultra Chrome Fork Tubes fits '16-'22 XL1200X/1200XS Models (OEM #455002-95) Features: Designed to fit a wide variety of models Made in the U.S.A Lengths given for OEM replacements may not be the exact OEM...

Custom Cycle Engineering - 49 mm Chrome Fork Brace fits '06-'17 FXD Model Features: Original Randy Smith design Manufactured from a solid piece of 6061 T-6 aluminum, then chrome-plated Designed with a compound arch for greater torsional stiffness,...

Custom Cycle Engineering - 49 mm Chrome Fork Brace fits '06-'08 FXDWG, '08-'17 FXDF Models Features: Original Randy Smith design Manufactured from a solid piece of 6061 T-6 aluminum, then chrome-plated Designed with a compound arch for greater...

Custom Cycle Engineering - Steering Damper System fits '99-'07 FLHR/​FLHT/​FLHTCU/​FLHX Models Features: This complete steering damper system stabilizes the front fork and helps prevent front-end wobble Custom-designed 1-1/4" clamp and bracket...

Custom Cycle Engineering - Swingarm Retrofit Kit fits '99-'01 FLT/​FLHT/​FLHR Models Features: Retrofits the improved swingarm from 02-08 Touring models to a 84-01 Touring models No need to alter transmission housing Will require the purchase of a...

Custom Cycle Engineering - Swingarm Retrofit Kit w/ Pivot Shaft fits '99-'01 FLT/​FLHT/​FLHR Models Features: Retrofits the improved swingarm from 02-08 Touring models to a 84-01 Touring models No need to alter transmission housing Will require the...

Custom Cycle Engineering - Radial Brake Caliper Brackets fits '18-'23 FXFB/​FXFBS/​FXLRS/​FXLRST Models Features: One piece brackets for fitment to radial mount calipers for 43 mm fork tubes Has increased feedback and better caliper to disc...

Custom Cycle Engineering - 41 mm Wide Glide Tweek Bar - Chrome Features: Original Randy Smith design As in the good old days with extended front tubes, the need for a tweek bar is here again Vast improvement over the tweek bars used in the 60s and...

Custom Cycle Engineering - Adjustable Engine Mount fits '99-'17 Dyna Models (OEM #47226-93, 47226-99, 47226-90A) Features: Replace stock front engine bracket with custom slotted bracket with alignment lines Allows the rider to dial in the engine to...

Custom Cycle Engineering - Top Stabilizer Link fits '99-'03 Dyna Models Features: Reduces engine vibration and aligns power train Adjustable rubber-isolated design Greatly reduces vibration especially at high speeds Replaces stock link which is...

Custom Cycle Engineering - Engine Equator II fits '09-'16 Touring Models Features: Allows all Dresser riders to correct chassis misalignment, which is impossible to achieve with the stock motor mount Billet aluminum bracket replaces the forged front...

Custom Cycle Engineering - Narrow-To-Wide Glide Wheel Conversion Kit fits '00-'03 Narrow Glide Model Features: Original Randy Smith design Allow the use of narrow glide 19" or 21" wheel (found on FX, FXR, FXD and XL models) to be installed in a 41...

Custom Cycle Engineering - Chrome Solenoid End Cover with Button for 2.0/2.4KW Starter Features: Billet aluminum construction Replaces the solenoid end cover and includes mounting screws Fits most '91-'16 OEM and aftermarket starter motors (except...

Custom Cycle Engineering - 41 mm Ultra Chrome Fork Tubes fits '99-'13 Touring (Except H-D FL Trike), '00-'17 Softail (Except FXS/​FXCW/​FXCWC), '00-'05 FXDWG Models (OEM #45890-97, 45930-00) Features: Designed to fit a wide variety of models Made in...

Custom Cycle Engineering - 35 mm Ultra Chrome Showa Fork Tubes fits '84-'86 FXRS, '86 FXR, '85 FXSB/FXE/F, '76-'83 FX/​FXR, '75-'83 Sportster Models (OEM #45407-73, 45644-77) Features: Designed to fit a wide variety of models Made in the U.S...

Custom Cycle Engineering - 41 mm Ultra Chrome 24.75" Fork Tubes fits '80-'E84 FXWG Model (OEM #45417-80) Features: Designed to fit a wide variety of models Made in the U.S.A Lengths given for OEM replacements may not be the exact OEM...

Custom Cycle Engineering - 35 mm Ultra Chrome Fork Tubes fits '84-'85 Sportster Models (OEM #45407-83) Features: Designed to fit a wide variety of models Made in the U.S.A Lengths given for OEM replacements may not be the exact OEM...