Harley Davidson

Jims - 8385 Compensator Nut Retainer fits '12-'13 Twin Cam & Screamin’ Eagle Models (OEM #83935-09A, 40274-08A) Features: Lockplate secures nut into sprocket retainer Incorporated lock tab One piece sprocket retainer for strength Made in...

Jims - 1733 Mega Nut fits '07-'20 Big Twin & '06-'17 Dyna Models Features: Includes machined clamping face tolerance, along with additional locking holes for a more precise and secure way to secure pulley nut Made in the U.S.A...

Jims - 1747 Lockdown Axle Kit fits '86-'04 Sportster Models Features: Heavy-duty swingarm end caps and axle nut washer resist the bending and flexing seen with stock components Swingarm end caps fit more precisely into the end of the swingarm,...

Jims - 943 Ignition Switch Alignment Tool fits '03-'13 Touring & '02-'10 V-Rod Models Features: Also used to position switch in the correct orientation for properly activating the fork lock Proper alignment of the switch will extend the life of...

Jims - 942 Ignition Switch Connector Tool fits '03-'13 Touring & '02-'10 V-Rod Models Features: Slip the dog bone end of tool into the bottom side of connector until it is touching the back end of connector box Then gently pull out the male...

Jims - 778 Ignition Lock Tool fits '06-'17 Dyna Models Features: Locates on ignition switch face nut that holds switch in place to remove or install switch without damage 3/8" drive access hole Made in the U.S.A...

Jims - 944 Ignition Switch Alignment Tool fits '14-'21 Touring Models Features: Also used to position switch in the correct orientation for properly activating the fork lock Proper alignment of the switch will extend the life of the ignition switch...

Jims - 755 O² Sensor Wrench fits '12-'17 Dyna & V-Rod Models Features: Removes and installs O² sensors without removing exhaust pipes Made in the U.S.A. Fitment 2016-2017 Harley-Davidson Low Rider S...

Jims - 981 Cruise Drive/6-Speed Main Drive Gear Tool fits '07-'17 Twin Cam & '06 Dyna Models Features: Holds the main drive gear square to its bearing bore, eliminating any marring of gear or bearings Installs the main drive gear without...

Jims - 986 Cruise Drive/6-Speed Main Drive Gear Bearing/Seal Installer Tool fits '07-'20 Big Twin & '06 Dyna Models Features: Holds bearings and seal square to its bore, eliminating any marring Install both bearings and seal with use of a...

Jims - 987 Cruise Drive/6-Speed Main Bearing Installer Tool fits '07-'20 Big Twin & '06 Dyna Models Features: Safely installs new main transmission case bearing; does not remove bearing Holds bearing square to its bore, eliminating any marring...

Jims - 984 Transmission Door Puller fits '07-'17 Big Twin & '06 Dyna Models Features: Removes transmission door with gears and shaft attached Made in the USA Puller will not damage door bearings...

Jims - 989 Main Drive Gear Sprocket Locknut Wrench fits '07-'21 Big Twin & '06 Dyna Models Features: Removes hex nut from end of main drive gear that secures the rear drive transmission pulley Extra-long two-piece design Made in the USA Inner...

Jims - Shifter Shaft Removal Tool fits '07-'20 Big Twin & '06 Dyna Models Features: Loosens and removes both shifter shafts from transmission door, allowing further disassembly of transmission Made in the...

Jims - 939 Sealed Wheel Bearing Tool fits '00-'17 Twin Cam, '00-'22 Sportster & '02-'17 V-ROD Models Features: Removes and installs 3/4", 1" and 25 mm wheel bearing with or without Anti-Locking Brake System (ABS) Made in the U.S.A...

Jims - 901 Cruise Drive/6-Speed Main Drive Gear Remover Tool fits '07-'20 Big Twin & '06 Dyna Models Features: Removes the main drive gear from the main bearing correctly while in the transmission case Eliminates the need of an arbor press and...

Jims - 911 Cruise Drive/6-Speed Trap Door Bearing Remover/Installer fits '07-'20 Big Twin & '06 Dyna Models Features: Accurately installs and removes lubed ball bearing into transmission trap door No arbor press needed Made in the U.S.A...

Jims - 767 6-Speed Transmission Case Shifter Shaft Seal Installer fits '06-'20 Big Twin & '84-'05 Sportster Models Features: Makes installing shifter shaft seal precise and effortless Aligns, centers and installs shifter seal to correct...

Jims - 768 5-Speed Transmission Case Shifter Shaft Seal Installer fits '80-'99 Big Twin, '99 Twin Cam, '99-'06 FXST & '99-'05 FLT/F LHT/​FXD Models Features: Makes installing shifter shaft seal precise and effortless Aligns, centers and...

Jims - 1658 Transmission Shifter Shaft Sleeve Tool fits '06-'20 6-Speed H-D Cruise Drive Models Features: Can be used to remove, install replacement or upgrade shifter shaft sleeve, assembly and drum Use to install shifter shaft sleeve Made in the...

Jims - 739 5 & 6-Speed Cruise Drive Countershaft Bearing Remover/Installer Tool Features: Install or remove the closed-end countershaft bearing on all 5-speed or 6-speed transmissions without using a press or tapping it in with a transmission...

Jims - 729 Inner Primary Seal/Bearing Removal/Installation Tool fits '85-'20 Big Twin Models Features: Gives a much better feel than a press while eliminating the possibility of applying too much pressure to the parts Provides precise installation...

Jims - 967-4 Installation/Removal Inner Primary Bearing Tool fits '07-'20 Big Twin & '06 Dyna Models Features: Safely removes and installs inner primary bearing without any damage to new bearing by pushing on outer perimeter of bearing Also...

Jims - 967-5 Inner Primary Bearing Tool fits '07-'19 Big Twin & '06 Dyna Models Features: Safely removes and installs inner primary bearing without any damage to new bearing by pushing on outer perimeter of bearing Also removes and installs...

Jims - 913 Wheel Bearing Support Plate Tool fits '14-'20 FL w/ Cast Wheels & '10-'20 CVO Models Features: Provides accurate and precise bearing removal and installation without the risk of damage to cast wheels Attaches to the brake rotor...

Jims - 2268 Main Case Seal Installer Tool fits '85-'06 5-Speed Big Twin & Aftermarket 6-Speeds Models Features: Ensures correct alignment, seal protection and depth when installing the seal Made in the...

Jims - 5502 Ultimate Clutch Adjusting Tool fits '85-'20 Big Twins Models w/ Mechanical Clutch Features: Allows the quick and accurate tightening of the clutch adjusting screw jam nut without having the screw change position No more guessing or...

Jims - 5516 Sprocket Nut/Removal/Installation Socket Tool fits '91-'20 Sportster & Buell Models (Except Buell 1125R) Features: Ensures the mainshaft on Harley-Davidson® Sportster models extends through the guidance collar for correct...

Jims - 5517 Removal/Installation Shifter Mechanism Sleeve Tool fits '06 Dyna & '07-'20 Big Twin w/ 6-Speed Cruise Drive Transmission Features: A real time saver for removing and installing the shifter mechanism sleeve in cruise drive Big Twin...

Jims - 5518 Shifter Shaft Bushing Tool fits '85-'16 FLT Touring w/ 5- or 6-Speed Transmission Features: Time-saving tool removes worn shift shaft bushings in Big Twin primaries without having to remove he inner primary Tools installs new bushings to...

Jims - 5534 Compensator Bolt Driver Torx Socket fits '14-'21 Big Twin Models Features: Correct-style driver/socket for the compensating sprocket retaining fastener Made in the USA For use with Jim's part# 10500031 compensator bolt...

Jims - Cruise Drive Countershaft 1st Scissor Gear Alignment Tool fits '17-'20 M-Eight Models Features: Essential for installing countershaft 1st scissor gear in cruise drive transmissions Ensures scissor gear teeth mesh correctly with the mainshaft...

Jims - 900 6-Speed Main Drive Gear and Bearing Remover/Installer fits '06-'17 Touring, '06 Dyna & '07-'17 Softail Models Features: Complete kit for servicing the main drive gear or the main bearing on the latest Harley-Davidson­­®...

Jims - 5512 Shifter Shaft Bushing Remover & Installer fits '17-23 FLHT/​FLTR/​FLHR Models Features: Designed to remove old bushing and install new shifter shaft bushing to proper depth Includes new installation driver with a receiver cup and...

Jims - 1672 Crankshaft Bearing Tool fits '03-'17 Twin Cam “A” and “B” Motors Models Features: Designed to remove and replace the right crankcase bearing Press bearing in and out straight with no damage to the case Made in...

Jims - 995 Case Splitter Tool fits '07-'17 Twin Cam & '06 Dyna Models Features: "Breaks" the case sealant by pushing apart both case halves Uses included hand thread-in pushing screw Flywheels will be pushed from the left case Bolts to primary...

Jims - 988 Valve Spring Compressor fits '05-'17 Twin Cam (Except SE Models), '04-'22 Sportster (Except RH Sportster) & Buell Models (Except 1125R) Features: Used to remove and replace valve and new-style conical valve spring Requires use of JIMS...

Jims - 967 Inner Primary Bearing and Seal Remover/Installer Tool fits 'L84-'06 FXST/​FLST & '85-'06 Touring & Dyna Models Features: Safely removes and installs inner primary bearing without any damage to new bearing by pushing on outer...

Jims - 969 Socket O² Sensor Tool fits '06 Dyna Glide & '07-'17 Twin Cam Models (Except 10-17 FLHT/​ FLHR/​FLHX/​FLTR, 11-17 FXST/​FLST/​FXS, 12-17 FXD/​FLD) Features: Remove and install oxygen sensors on fuel-injected models Socket tool...

Jims - 972 6-Speed Main Drive Gear Seal Installer fits all '07-'20 Big Twin & '06 Dyna Models Features: Use to install main drive gear oil seal to the proper depth with transmission assembled Includes protective sleeve for seal, which can be...