Harley Davidson

V-Twin - 21" x 2.15" Spool Front Wheel fits Custom application 21" x 2.15" hub wheel with a chrome steel drop center rim and includes a billet hub 3-1/2" wide x 5" diameter and 40 chrome spokes. This hub wheel is laced and trued with 3/4" heavy duty...

V-Twin - 21" x 1.85" Front Spool Wheel fits Custom application 21" X 1.85" front spool steel wheel has a chrome finish and features 3/4" inner diameter bearing set installed with spacer tube. Note: All spokes on wheel need to be inspected and re-torqued...

V-Twin - 21" x 2.15" Front Spool Wheel fits Custom application Model 21" x 2.15" profile style spool wheel is completely assembled with a chrome hub with 3/4" bearings installed, 40 chrome spokes and nipples and a 21" x 2.15" smooth profile rim, laced...

V-Twin - Side Plate Docking Hardware Kit With Brackets fits '06-'17 FXD Model (OEM #53961-06) Chrome docking hardware kit includes zinc brackets for detachable side plates. This kit requires a turn signal relocation kit. Fitment: FXD 2006-2017

V-Twin - One Piece Sissy Bar fits '06-'17 Dyna Models - Black (OEM #523000-46A) 21" sissy bar features the one piece bolt on design in a gloss black finish. Round sissy bar with the upper kick angle mimics the old school look of the 50-60's bobber...

V-Twin - Bates Solo Seat Tuck and Roll Style fits '82-'03 XL Model - Black Tuck & Roll Bates style slim solo seat features a black naugahyde finish and includes a steel base plate. Seat mounts directly to fender and does not accept springs.Seat...

V-Twin - Corbin Gentry Banana Black Seat fits '57-'78 Sportster Model Corbin Gentry banana style seat is covered in black naugahyde. Seat features a tuck & roll, low design with steel base plate for XL Ironhead models. Seat direct mounts to...

V-Twin - Corbin Gentry Banana Black Seat fits '82-'03 Sportster Model Corbin Gentry banana style seat is made of black naugahyde. Seat features a tuck & roll stitch pattern with a firm foam on a steel base plate. Rear tab is included. Fitment: ...

V-Twin - Corbin Gentry Tuck and Roll Seat fits '71-'84 FX, '65-'84 FL Models - Black Black Corbin Gentry tuck and roll seat features the original design of the 1970's. The seat does not come with the rear mounting tab. Measurements: Length: 28-3/4"...

V-Twin - Frame Mount Solo Seat fits '70-'84 FX, '65-'84 FL Models - Black Vinyl Frame mount vinyl solo seat is equipped with molded high density foam padding and a plastic seat pan. This solo seat mounts directly to the frame without springs. The...

V-Twin - Corbin Gentry Spoon Rigid Seat Corbin Gentry spoon seat features a single seam design with a black naugahyde covering and smooth top. For all rigid applications.

V-Twin - Corbin Gentry Stinger Mark 1 Rigid Style Seat fits '41-'57 FL Model Stinger seat is MK 1 style and features a black naugahyde tuck and roll pattern. Features a metal base plate. Original Corbin Gentry design from the 1970's. Suggested to...

V-Twin - Tuck and Roll Frame Mount Solo Seat Set fits '71-'84 FX, '58-'84 FL Models Frame mount vinyl tuck and roll style solo seat set is black naugahyde on a steel base plate for direct frame moutning. The mount screw inserts are 5/16 x 18 thread.This...

V-Twin - Corbin Gentry Tuck and Roll Solo Black Seat Corbin Gentry tuck and roll seat set features a black naugahyde construction with a formed steel base plate. Seat is for rigid frame applications with "deep" frame to rear fender contour. The seat...

V-Twin - AEE Shock Set with Covered Springs fits '73-'84 FX '73-'84 FL Models (OEM #54500-73A) AEE chrome 12" shock set comes with full covered springs. The inner diameter of the top eyelet is .512". The inner diameter of the bottom eyelet are...

V-Twin - MCM Illusion Drag Pipe Set fits '04-'13 Sportster Model - Chrome 1-3/4" drag pipe set with a 2" full coverage form fitted heat shield set, both featuring a chrome finish. NOTE: Bung opening is 18mm. The heat shield runs from the exhaust...

V-Twin - MCM Illusion Drag Pipe Set fits '14-Up Sportster Model - Chrome 1-3/4" drag pipe set with a 2" full coverage form fitted heat shield set, both featuring a chrome finish. NOTE: Bung opening is 12mm. The heat shield runs from the exhaust port...

V-Twin - MCM FXE Exhaust System fits '71-'84 FX, '71-'84 FXE Models Chrome plated muffler pipe set features a steel core baffled tapered muffler and 1-3/4" header pipes with one piece construction and channel mounting. Features bolt on installation...

V-Twin - MCM FXE Goose Drag Pipe Set fits '70-'84 FXE Model - Chrome Chrome goose style drag pipes feature retro chopper styling in 1-3/4" diameter, with channel mounts and is 35" long with slash cut ends. *NOTE: Does not have baffles or drilled...

V-Twin - Chrome 2 into 1 Exhaust Header Set fits '70-'84 FL, '71-'84 FX Models Chrome 2 into 1 exhaust header pipe set is for use with forward controls only. Set includes 12mm oxygen sensor bung. The turn out end is 3" in diameter. For use with...

V-Twin - 13-1/2" AEE Magnum Shock Set fits '58-'72 FL Model AEE Magnum shock set is 13-1/2" long with full chrome covers and a black inner body. Shocks are manufactured from the finest material. Magnum shocks are nitrogen charged with six stage...

V-Twin - Polished Belt Drive Alternator Cover Cover is designed to protect your alternator and helps cooling by acting as a heat sink. For use on all cone engines and is equipped with a mounting lug for the belt shroud built in. Fitment: Custom...

Colony - Inner Primary Mount Kit fits '94-'99 FXST/​FLST Models (OEM #2818, 33318-85, 4086) Features: Kits include all required hardware needed to install an inner primary Made in the U.S.A. Replacement Part for...

Colony - Inner Primary Mount Kit fits '86-'93 FXST/​FLST Models (OEM #2818, 2871W, 33318-35) Features: Kits include all required hardware needed to install an inner primary Made in the U.S.A. Replacement Part for...

Colony - Inner Primary Mount Kit fits '86-'98 FLT Model (OEM #2818, 2871W, 33318-35) Features: Kits include all required hardware needed to install an inner primary Made in the U.S.A. Replacement Part for...

Colony - Inner Primary Mount Kit fits '80-'85 Big Twin 4-Speed Models (OEM #16830-54, 4021, 4722) Features: Kits include all required hardware needed to install an inner primary Made in the U.S.A...

Colony - Fork Drain Screws fits '84-'99 FXST/​FLST, '84-'98 FLT/​FLHT/​FLHR/​FLTR, '84-'86 FXWG Models (OEM #45858-77) Features: Two button head Allen screws with two copper compression washers Made in the U.S.A...

Colony - 1024-P Motor Allen Bolt Kit fits '07-'16 FLT/​FLHT/​FLHR/​FLHRX/​FLTR Models Features: High-quality chrome-plated finish Kits include everything you need to mount rocker boxes, primary cover, lifter base, transmission covers, oil pump, air...

Colony - 1023-P Motor Allen Bolt Kit fits '06-'17 FXD Model (Except H.O. 103”) Features: High-quality chrome-plated finish Kits include everything you need to mount rocker boxes, primary cover, lifter base, transmission covers, oil pump, air...

Colony - 8769-3 Front Axle Nut/Washer Kit fits '99-'07 FXDWG, '00-'06 FXST/​FLST, '99-'07 FLHT/​FLHR/​FLTR; 1/2”-20 Thread (OEM #6590HW, 7068, 7845) Features: Kits include axle nut, sleeve nut, cotter pin and axle nut washer for 3/4"...

Colony - 8307 Cadmium Complete Stock Hardware Kit fits '66-'69 Shovelhead Model Features: Kit includes all stock motor nuts, bolts, washers and studs All hardware meets or exceeds original H-D specifications Made in the U.S.A...

Colony - 8303 Cadmium Complete Stock Hardware Kit fits '58-'65 Panhead Model Features: Kit includes all stock motor nuts, bolts, washers and studs All hardware meets or exceeds original H-D specifications Made in the U.S.A. Fitment 1965...

Colony - Throttle Roller/Pin Kit fits '54-'65 Big Twin Models (OEM #56276-31, 56278-10) Features: Kit includes hardened and grounded rollers, pins, coil plug set screws and control wire ends Designed specifically for Harley-Davidson­® Made...

Colony - Transmission Cover Screws (OEM #2333, 34720-56) - Cadmium Features: OEM duplicate used to mount the transmission top cover Made in the U.S.A. Fitment 1958-1964 Harley-Davidson Duo Glide FLH - - 1958-1964 Harley-Davidson Duo Glide FL - - ...

Colony - 9013-4 Carburetor Support Bracket for '36-'52 45's (OEM #27432-36) Features: Exact reproduction of the original Harley-Davidson® support brackets Used to support the Linkert carburetor Made in the U.S.A. Fitment: 1936-1951...

Colony - 8876-5 Seat Bar Bushing Set fits '54-'80 Big Twin, '65-'80 Sportster Models (OEM #51925-65) Features: Precision-machined, heat treated and ground bushings Includes all mounting hardware Made in the U.S.A...

Colony - 1000P Polished Motor Transmission Bolt Kit fits '99-'05 Dyna Models Features: Made in the U.S.A. Fitment 2005 Harley-Davidson Super Glide Custom FXDC - - 2005 Harley-Davidson Super Glide Custom EFI...

Colony - 1001P Polished Motor Transmission Bolt Kit fits '99-'06 FLT/​FLHT/​FLHR/​FLHX/​FLTR Models Features: Made in the U.S.A. Fitment 2006 Harley-Davidson Street Glide FLHX - - 2006 Harley-Davidson Street Glide EFI...

Colony - Cam Cover Acorn Hardware Kit fits '66-'69 Big Twin Models Features: Individual acorn bolt and nut sets for specific applications Made in the U.S.A. Fitment 1965-1969 Harley-Davidson Electra Glide FL - - 1965-1969 Harley-Davidson 1200...

Colony - Front Axle Spacer Kit fits '00-'03 FXD,  '00-'07 Sportster Models (OEM #43358-00, 43617-00) Features: Kit includes polished/chrome-plated finish spacers, nuts and machined washers Made in the U.S.A...