Engine
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Vance & Hines Header Wrap Kit - Black
Vance and Hines
$119.99Vance & Hines Header Wrap Kit - Black Manufacturer's Notice: Use of this Vance & Hines Header Wrap Kit may void all warranties of the exhaust system that this Kit is applied to. Header Wrap functions to insulate heat generated by exhaust gases...$119.99 -
Feuling - Gorilla Rocker Shaft and Bolt Kit fits '01-'17 Harley Models
Feuling
$269.95Feuling - Gorilla Rocker Shaft and Bolt Kit fits '01-'17 Harley Models This kit is recommended for all Twin Cam engines, especially for engines running higher lift camshafts and heavier valve springs. Features Gas nitrided and final surface...$269.95 -
S&S Cycle - Oil Pump and Cam Support Plate Kit fits '17-'21 M8 Models W/ Twin Cooled™ Engines
S&S Cycle
Now: $753.26Was: $836.95S&S Cycle - Oil Pump and Cam Support Plate Kit fits '17-'21 M8 Models W/ Twin Cooled™ Engines S&S Cycle's Oil Pump and Cam Support Plate Kit for '17-'21 M8 Models with Twin Cooled Engines™ delivers a 44% flow increase on the supply...Now: $753.26Was: $836.95 -
Arlen Ness - 10-Gauge Cam Cover fits '01-'17 Twin Cam Models W/O Cam Position Sensor
Arlen Ness
Now: $269.96Was: $299.95Arlen Ness - 10-Gauge Cam Cover fits '01-'17 Twin Cam Models W/O Cam Position Sensor This gauge cover is available in your choice of a chrome, black anodized w/ machined accents, titanium anodized or black anodized finish. Features Machined from 6061...Now: $269.96Was: $299.95 -
Arlen Ness - 10-Gauge Cam Cover fits '17-'22 M8 Models
Arlen Ness
Now: $296.96Was: $329.95Arlen Ness - 10-Gauge Cam Cover fits '17-'22 M8 Models This gauge cover is available in your choice of a chrome, black anodized w/ machined accents, titanium anodized or black anodized finish. Features Machined from 6061 T-6 forged aluminum Replaces OEM...Now: $296.96Was: $329.95 -
Arlen Ness - 10-Gauge Lifter Block Covers fits '17-'21 M8 Softail Models (Choose Finish)
Arlen Ness
Now: $224.96Was: $249.95Arlen Ness - 10-Gauge Lifter Block Covers fits '17-'21 M8 Softail Models (Choose Finish) These 10-gauge lifter blocks act as replacements for OEM lifter blocks and accept factory and aftermarket pushrod tubes. Available in your choice of a chrome, black...Now: $224.96Was: $249.95 -
Arlen Ness - Finned Cam Cover fits '14-'21 Models W/ 111" or 116" Thunder Stroke® Engines
Arlen Ness
Now: $179.96Was: $199.95Arlen Ness - Finned Cam Cover fits '14-'21 Models W/ 111" or 116" Thunder Stroke® Engines The Arlen Ness Finned Cam Cover has a 3D-sculpted design that matches the finned rocker box's on Indian 111" Thunderstroke engines...Now: $179.96Was: $199.95 -
Colony - Acorn Engine Case Bolt Kit - Chrome fits Harley FL, FX, FXD (see desc.)
Colony Machine
Now: $66.99Was: $75.35Engine case kit includes all the necessary hardware to bolt together engine cases. Fits: FL 1979-1984 FX 1979-1984 FXST 1984-1995 FXD 1991-1995 FLT 1979-1995 FLST 1986-1995 FXR 1982-1994Now: $66.99Was: $75.35 -
Colony - Acorn Headbolt Cover Kit - Chrome fits '73-'84 XL
Colony Machine
Now: $51.99Was: $58.35Colony's acorn type headbolt cover kit has a chrome finish. Fits: XL 1973-1984Now: $51.99Was: $58.35 -
Colony - Acorn Tappet Base Screw Set - fits Harley '76 -Up FL, FX (see desc.) - Chrome
Colony Machine
Now: $29.99Was: $33.36Acorn tappet base screw Screw does not have taper and fits 1976-up style lifter blocks only. Fits:FL 1976-1984FX 1976-1984FLT 1979-1998FXR 1982-1994FLST 1986-1998FXD 1991-1998Now: $29.99Was: $33.36 -
Colony - Aluminum Alloy Pushrod Kit fits '57-'85 XL Sportster
Colony Machine
$46.31Colony pushrod sets are contructed of aluminum alloy with heat treated steel ends. Fits: XL 1957-1985 OEM No: 17904-57$46.31 -
Colony - Cam Cover Screw Set fits Harley FL, FX (see desc.) - Chrome
Colony Machine
Now: $15.99Was: $17.00Colony Chrome cam cover screw set. Fits:FL 1970-1984FX 1971-1984FLT 1979-1992FXR 1982-1992FXST 1984-1992FLST 1986-1992FXD 1991-1992Now: $15.99Was: $17.00 -
Colony - Chrome Rocker Cover Screw Kit fits Harley XL, FL, FXD - Button Head
Colony Machine
Now: $24.99Was: $27.80Colony Machine Rocker box screw set, Chrome Button Head style. Fits: FXST 1984-1998 FLST 1986-1998 FLT 1984-1998 FXR 1984-1994 FXD 1991-1998 XL 1986-UPNow: $24.99Was: $27.80 -
Colony - Cylinder Base Acorn Nut and Washer Set - Chrome fits '57-'84 XL
Colony Machine
Now: $25.99Was: $28.64Cylinder Base Chrome Acorn Nut and Washer Set Fits: XL 1957-1984Now: $25.99Was: $28.64 -
Colony - Cylinder Base Nut Set - Chrome fits '57-'84 XLR
Colony Machine
Now: $39.99Was: $45.13Colony C chrome cylinder base nuts. Fits: XLR 1957-1984Now: $39.99Was: $45.13 -
Colony - Cylinder Head Bolt Set - Chrome fits '92-'98 FXST, FLST, FXD, FLT and '93-'04 XL
Colony Machine
Now: $107.99Was: $109.98Colony cylinder head bolt set with a chrome finish. Fits: FXST 1992-1998 XL 1993-2004 FLST 1992-1998 FXD 1992-1998 FLT 1992-1998 UOM: 8 - SETNow: $107.99Was: $109.98 -
Colony - Cylinder Head Engine Brace Mount - Cadmium fits '48-'65 FL
Colony Machine
Now: $22.99Was: $23.04Cylinder head engine brace mount with a cadmium finish. Fits: FL 1948-1965Now: $22.99Was: $23.04 -
Colony - Cylinder Head Engine Brace Mount - Cadmium fits '66-'84 FL and '71-'84 FX
Colony Machine
$22.99Cylinder head engine brace mount. Fits: FL 1966-1984 FX 1971-1984$22.99 -
Colony - Cylinder Head Engine Brace Mount - Parkerized fits '48-'65 FL
Colony Machine
$22.99Parkerized cylinder head engine brace mount. Fits: FL 1948-1965$22.99 -
Colony - Engine Case Seal - fits '55-'68 FL
Colony Machine
Now: $46.99Was: $53.20Engine case seal .002 oversize. Fits: FL 1955-1968Now: $46.99Was: $53.20 -
Colony - Engine Case Sprocket Shaft Seal - fits '41-54 FL, '36-'40 EL
Colony Machine
Now: $28.99Was: $31.93Sprocket shaft seal. Fits: EL 1936-1940 FL 1941-1954Now: $28.99Was: $31.93 -
Colony - Headbolt Kit - fits '73-'85 XL
Colony Machine
$52.70 - $65.92Colony headbolt kit available in chrome or cadmium. Fits: XL 1973-1985$52.70 - $65.92 -
Colony - Rocker Box Allen Screws - Chrome fits '57-'76 XL
Colony Machine
Now: $32.99Was: $36.96Rocker Box allen screws. Chrome finish Fits: XL 1957-1976Now: $32.99Was: $36.96 -
Colony - Rocker Box Screw Kit - fits '77-'85 XL
Colony Machine
$40.16Colony rocker box screw kit without stud is available in chrome or cadmium finish Fits:XL 1977-1985$40.16 -
Colony - Rocker Box Screw Kit - fits '57-'76 XL
Colony Machine
$33.98 - $40.16Colony Rocker Box Screw Kit is available in Chrome or Cadmium finish Fits: XL 1957-1976$33.98 - $40.16 -
Colony - Rocker Shaft End Plugs - fits '66-'70 FL, '57-'70 XL
Colony Machine
Now: $39.99Was: $44.49The chrome rocker arm shaft end plug makes installation and removal a much easier job than with the original slotted part. Includes 4 plugs per set. Fits: FL 1966-1970 XL 1957-1970Now: $39.99Was: $44.49 -
Colony - Stock Engine Case Bolt Kit- fits '70-'78 FL, '71-'78 FX
Colony Machine
$59.60 - $66.95Engine case kit includes all the necessary hardware to bolt together engine cases. Fits: FL 1970-1978 FX 1971-1978$59.60 - $66.95 -
Colony - Stock Engine Case Bolt Kit- fits Harley FL, FX, FXD (see desc.)
Colony Machine
$59.60 - $66.95Engine case kit includes all the necessary hardware to bolt together engine cases. Fits: FL 1979-1984 FX 1979-1984 FXST 1984-1995 FXD 1991-1995 FLST 1986-1995 FXR 1982-1994 FLT 1979-1995$59.60 - $66.95 -
Colony - Tappet Block Screw Kit - Cadmium fits '57-'85 XL
Colony Machine
Now: $12.99Was: $14.72Colony tappet block screw kit with a cadmium finish. Fits: XL 1957-1985Now: $12.99Was: $14.72 -
Colony - Upper and Lower Allen Motor Mount Kit - fits '70-'84 FL, '71-'84 FX
Colony Machine
Now: $44.99Was: $46.25Upper and lower allen motor mount kit Fits: FL 1970-1984 FX 1971-1984Now: $44.99Was: $46.25 -
Colony - Upper Pushrod Cover Inner fits '57-'78 XL, '41-'78 FL
Colony Machine
Now: $39.99Was: $44.27Colony Upper Pushrod Cover (Inner). OEM No: 17935-66 Fits: EL 1936-1940 FL 1941-1978 FX 1971-1978 XL 1957-1978Now: $39.99Was: $44.27 -
Colony - Upper Pushrod Cover Set fits '86-'90 XL Sportster
V-Twin Manufacturing
$64.78Chrome upper pushrod cover set includes 2-13/16" long clips Fits: XL 1986-1990$64.78 -
Colony Machine - Engine Bolt Kits fits '17-'21 Touring Models
Colony Machine
$243.95Colony Machine - Engine Bolt Kits fits '17-'20 Touring Models The Colony Machine Engine Bolt Kit is a fully equipped, chrome plated kit that is 100% manufactured in the U.S.A. Colony Machine is a choice brand among custom motorcycle builders,...$243.95 -
Colony Machine - Replacement Cylinder Stud Set fits '99-'17 Twin Cam
Colony Machine
$88.95Colony Machine - Replacement Cylinder Stud Set fits '99-'17 Twin Cam The Colony Machine Replacement Cylinder Stud Set is sold as a set of eight and is 100% manufactured in the U.S.A. Colony Machine are the first makers of chrome plated and stock OEM...$88.95 -
Cometic - Primary Gasket Kit fits '07-'22 Sportster Models (Exc. '21-'22 Sportster S/RH, '22 Nightster/RH975)
Cometic
$40.95Cometic - Primary Gasket Kit fits '07-'22 Sportster Models (Exc. '21-'22 Sportster S/RH, '22 Nightster/RH975) This kit features Cometic's proprietary AFM (Aluminum Foamette Material) gaskets. These gaskets have an aluminum core with a chemically blown,...$40.95 -
Cometic - Primary Gasket Kit fits '77-'90 Sportster Models
Cometic
$53.95Cometic - Primary Gasket Kit fits '77-'90 Sportster Models This kit features Cometic's proprietary AFM (Aluminum Foamette Material) gaskets. These gaskets have an aluminum core with a chemically blown, compounded nitrile synthetic rubber which is bonded...$53.95 -
Cometic - Primary Gasket Kit fits '94-'06 Touring Models
Cometic
$123.95Cometic - Primary Gasket Kit fits '94-'06 Touring Models This kit features Cometic's proprietary AFM (Aluminum Foamette Material) gaskets. These gaskets have an aluminum core with a chemically blown, compounded nitrile synthetic rubber which is bonded...$123.95 -
Custom Cycle Engineering - Front Motor Mount fits '06-'17 Dyna Models
Custom Cycle Engineering
$543.95Custom Cycle Engineering - Front Motor Mount fits '06-'17 Dyna Models This mount uses an adjustable stabilizing link, which attaches to the frame. Features Motor mount system replaces the inadequate stock mounts Made in the U.S.A...$543.95 -
Custom Cycle Engineering - Top Stabilizer Link - fits '99-'03 Harley Dyna
Custom Cycle Engineering
$311.58Custom Cycle Engineering - Top Stabilizer Link - fits '99-'03 Harley Dyna Does your Dyna vibrate on the highway? The Custom Cycles Top Stabilizer is just what you need. This reduces engine vibration and aligns the power train. This top stabilizer uses...$311.58 -
Custom Cycle Engineering - Top Stabilizer Link fits '91-'03 Dyna Models (Open Box)
Custom Cycle Engineering
MSRP: $311.58Now: $249.26Was: $311.58All open box items are non-returnable and final sale due to their discounted nature. This item has been previously returned, item is new, however could be missing the original packaging or the packaging has been opened. Tags, manuals, or installation...MSRP: $311.58Now: $249.26Was: $311.58