Motor Mounts

Custom Cycle Engineering - 41 mm Wide Glide Tweek Bar - Chrome Features: Original Randy Smith design As in the good old days with extended front tubes, the need for a tweek bar is here again Vast improvement over the tweek bars used in the 60s and...

Custom Cycle Engineering - Top Stabilizer Link fits '99-'03 Dyna Models Features: Reduces engine vibration and aligns power train Adjustable rubber-isolated design Greatly reduces vibration especially at high speeds Replaces stock link which is...

Custom Cycle Engineering - Engine Equator II fits '09-'16 Touring Models Features: Allows all Dresser riders to correct chassis misalignment, which is impossible to achieve with the stock motor mount Billet aluminum bracket replaces the forged front...

Colony - 9522-22 Cadmium Motor Mount Kit fits '37-'48 UL Model Upper and lower motor mount kit with a cadmium finish. Fitment: UL 1937-1948

Colony - 9626-16 Parkerized Lower Motor Mount Kit fits '36-'52 WL, '36-'73 G, '30-'36 VL Models - Lower Only Lower motor mount kit with a parkerized finish Fitment: WL 1936-1952 Lower only G 1936-1973 Lower only VL 1930-1936 Lower only

Colony - 9721-2 Top Motor Mount Headbolt Spacer fits '41-'73 G, '41-'52 WL Models Parkerized top motor mount headbolt spacer for spacing out the two longest head bolts on aluminum head models Fitment: G 1941-1973 WL 1941-1952

Colony - 9723-22 Parkerized Motor Mount Kit fits '37-'48 UL Model Upper and lower motor mount kit with a parkerized finish Fitment: UL 1937-1948

Colony - 9725-20 Parkerized Headbolt fits '36-'39 EL Model Parkerized headbolt with washer Fitment: EL 1936-1939

Colony - 9727-18 Parkerized Stock Headbolt Kit fits '37-'48 UL Model Stock head bolt kit comes with aluminum head on bolts and parkerized finish for 74" and 80" engines. Fitment: UL 1937-1948

Colony - 9728-36 Parkerized Headbolt Kit fits '37-'48 UL '29-'52 WL, '29-'73 G Models Parkerized stock headbolt kit for Flathead engines. Fitment: UL 1937-1948 WL 1929-1952 G 1929-1973

Colony - 9746-7 Parkerized Rear Chain Guard Mount Kit fits '36-'52 WL Model Parkerized rear chain guard mount kit for side valve models  Note: Assembly order, from outside in: Inner Primary -> Outside, Rigid Chain Guard -> Between, Oil...

Colony - 9781-5 Parkerized Top Motor Mount Kit fits '37-'52 WL, '32-'73 G Models Parkerized top motor mount kit Fitment: WL 1937-1952 G 1932-1973

Colony - 9797-20 Front Motor Mount Kit Allen Type fits '57-'84 Sportster Models Allen type front motor mount kit. Fitment: XL 1957-1984

Colony - 9799-20 Front Motor Mount Kit Hex Type fits '57-'84 Sportster Models Hex type front motor mount kit with a cadmium finish. Fitment: XL 1957-1984

Colony - 9855-28 Zinc Upper and Lower Engine Mount Bolts fits '84-'99 FXST, '86-'99 FLST Models Upper and lower engine mount bolts with a zinc finish. Fitment: FXST 1984-1999 FLST 1986-1999

Colony - 9859-20 Lower Engine Mount Kit fits '89-'99 FLT, '89-'94 FXR Models Chrome lower engine mount bolt kit. Fitment: FLT 1989-1999 FXR 1989-1994

Colony - 9927-28-P Upper and Lower Engine Mount Allen Bolts fits '84-'99 FXST, '86-'99 FLST Models Polished upper and lower Allen type engine mount bolts Fitment: FXST 1984-1999 FLST 1986-1999

Colony - 9934-8 Transmission To Engine Mount Acorn Bolts fits '99-Up FLT TC-88, '99-'17 FXD TC-88 Models Acorn style transmission to engine mount bolts. Fitment: FLT 1999-UP TC-88 FXD 1999-2017 TC-88

Colony - 9936-28 Front Engine Mount Acorn Bolts fits '99-'17 FXD Model Front Acorn style engine mount bolts Fitment: FXD 1999-2017

Colony - 9967-4 Chrome Screw Set for Motor Mount to Cylinder Head fits '93-Up FLST/FXST, '86-Up Sportster Models Chrome engine mount to cylinder head screw set features flat head allen screws and countersunk washers Fitment: FLST 1993-UP XL...

Colony - Motor Mount Hardware Kit for '84-'99 FXST/​FLST Features: Made in the U.S.A. Replacement Part for OEM: 3512 4416 4716W 4726 6019 Fitment 1999 Harley-Davidson Softail Night Train FXSTB - - 1997-1999 Harley-Davidson Softail Heritage...

Colony - Upper and Lower Motor Mount Hardware fits '70-'84 Shovelhead Model (OEM #4401W, 4435W) Features: Includes one 7/16" - 20 x 1-1/2" bolt, one 7/16" - 20 nylock nut, three 5/16" OD x 7/16" ID x 1/8" thick flat washers, two 3/8" - 24 x 3-1/2"...

Colony - Motor Mount Kit fits '70-'84 Big Twin Models (OEM #4401W, 4435W) Features: Individual chrome bolt and nut sets for specific applications Made in the U.S.A. Replacement Part for...

Drag Specialties Top Motor Mount Top Motor Mount for your Harley Sportster by Drag Specialties. Features: High-quality, chrome motor mount Bolts not included unless noted Fitment: YearMakeModel 1986 - 1987 Harley-Davidson XLH...

Upper and lower allen motor mount kit Fits: FL 1970-1984 FX 1971-1984

V-Twin - Motor Mount Kit - Fits EL '36-'40 FL '41-'69 V-Twin Upper and lower motor mount bolt kit is available in chrome, cadmium, or a parkerized finish. FitmentEL 1936-1940FL 1941-1969

The Drag Specialties Motor Mounts are top quality. Easily replace using OEM hardware. These motor mounts meet or exceed OEM specifications. Sold Each  

Drag Specialties Motor Mount Stabilizer for Harley Model Motor mount stabilizer for Harley Touring, FXR, and Dyna Glide models. Make sure you check the fitment table below to ensure it will fit your bike! Details: Available in a chrome finish Two...

Drag Specialties - Swingarm Isolator Mount fits '86-'08 Touring & '99-'00 FXR Models (Repl. OEM #47564-86B) This mount meets or exceeds OEM specifications. Sold each.  NOTE: Will fit '85 models that have been updated with OEM swingarm pivot...

Drag Specialties - Iso-Mount™ Front Motor Mount fits '09-'16 Touring Models (Repl. OEM #16207-09) This is a urethane motor mount specifically built to last longer and out-dampen the OEM part. Sold separately...

Drag Specialties - Iso-Mount™ Rear Motor Mount fits '09-'16 Touring Models (Repl. OEM #47584-09) This is a urethane motor mount specifically built to last longer and out-dampen the OEM part. Sold separately...

Comp Cams Velva Ride Motor Mount Stabilizers Fits Harley Davidson FLT and Dyna Models Features: Body contains a plunger encased in a specially formulated urethane to absorb vibration Sold each or in pairs Made in the U.S.A...

Gasbox Custom Top Motor Mounts w/ crank key mount and coil mount Designed for OEM Fuel-injected coil Made in the USA

Colony - 2709-24 Knurled Motor Mount Bolt Kit fits '09-'16 FLT Model (OEM #4313, 4688) Features: Individual bolt and nut sets for specific applications Bolt kits include allen screws, nuts and washers Replacement Part for...

Drag Specialties - DS243607 - Heavy Duty Motor Mount - SoftailFeaturesChrome-plated heavy-duty mounts are 30% thicker than stockMounts include chrome choke/horn bracketsPART #s DS-243607, DS-273619 come with sockethead hardwareSpecsProduct...

Drag Specialties - DS243606 - Heavy Duty Motor Mount - FXRFeaturesChrome-plated heavy-duty mounts are 30% thicker than stockMounts include chrome choke/horn bracketsPART #s DS-243607, DS-273619 come with sockethead hardwareSpecsRiding...

Drag Specialties - DS243515 - Front ISO-Mount™ Motor Mount - RubberFeaturesUrethane motor mount specially designed to out-last and out-dampen the OEM partSold individuallyReplacement Part for OEM Number(s):1620779BSpecsUnitsEachRiding...

Drag Specialties - 09330143 - Front Motor Mount - M8 TouringFeaturesUrethane motor mount specially designed to out-last and out-dampen the OEM partProvide superior damping and durability compared to the stock motor mountReplacement Part for OEM...

Drag Specialties - 09330135 - Front Motor Mount - Heavy DutyFeaturesUrethane motor mount specially designed to out-last and out-dampen the OEM partProvide superior damping and durability compared to the stock motor mountReplacement Part for OEM...

Drag Specialties - 09330119 - Rear Motor Mount Kit - XLFeaturesIncludes all parts needed to replace rear isolator mountsIncludes OEM #s 16291-04 (isolator mount), 48492-04 (isolators), 41699-04 (lock plate), 4750004 or 41568-04 (pivot shaft), 4290...