Motorshop

V-Twin - 10-1035 - V-Twin Stock Flywheel AssemblyDescriptionShipped assembled and trued with shafts included. Fits:WL 1937-1952G 1937-1973DL 1929-1931W 1937-1952WL 1932-1936Additional Information ...

V-Twin - 10-1034 - V-Twin Stock Flywheel AssemblyDescriptionShipped assembled and trued with shafts. Fits:FL 1955-1957Additional Information OEM No.23907-55A UOM1 - EA ManufacturerMotorshop ...

V-Twin - 10-1033 - V-Twin Stock Flywheel AssemblyDescriptionShipped assembled and trued with shafts. Fits:FL 1954-1954Additional Information OEM No.23907-54 UOM1 - EA ManufacturerMotorshop ...

V-Twin - 10-1013 - UL-ULH Flywheel AssemblyDescriptionUL-ULH flywheel assembly is for 74 and 80" side valve flathead models. Shipped complete, assembled, balanced and trued with shafts. Fits:UL...

V-Twin - 10-1008 - 4 inch Stroke V-Twin Flywheel AssemblyDescriptionFlywheel assembly with 4" stock stroke is shipped assembled and trued with shafts.*NOTE: Tapered bearing shims for final assembly...

V-Twin - 10-1007 - V-Twin Stock Flywheel AssemblyDescription74" flywheel assembly is shipped assembled and trued with shafts, for 1941-1953 FL models. Fits:FL 1941-1953Additional Information UOM1 -...

V-Twin - 10-0991 - Left Side Engine CaseDescriptionCase is a reproduction of the original 45 cubic inch left side case, features a bare as cast aluminum finish.Case is blank, without serial numbers...

V-Twin - 10-0990 - Solid Lightning Tappet Set .010 OversizeDescriptionSifton solid tappet set includes installed roller assembly.Adjuster screws are not included. Fits:WL 1937-1952UL 1937-1948KH...

V-Twin - 10-0989 - Solid Lightning Tappet Set .005 OversizeDescriptionAssembly is .005 oversize with rollers installed.Adjuster screws are not included. Fits:WL 1937-1952UL 1937-1948KH 1954-1956G...

V-Twin - 10-0988 - Replica Zinc Plated Tappet Block SetDescriptionFront and rear replica tappet block set is constructed from steel featuring a zinc plated finish.The counter bore for the screws are...

V-Twin - 10-0987 - Replica Chrome Tappet Block SetDescriptionFront and rear replica tappet block set is constructed from cast iron featuring a chrome plated finish.The counter bore for the screws are...

V-Twin - 10-0980 - Knucklehead Engine Case SetDescriptionKnucklehead engine case set includes case bushings standard size rollers.Oil from top end returns through pushrod tubes. Does not return...

V-Twin - 10-0978 - Shovelhead Cam Chest Assembly KitDescriptionShovelhead cam chest kit includes a smooth finish cast cam cover and all internal parts for assembly.*NOTE: Check the pinion and cam...

V-Twin - 10-0977 - Right Side Engine CaseDescription45" right side engine case includes bronze cam bushings installed.*NOTE: This is the right hand case, requires case race to be installed when...

V-Twin - 10-0949 - Engine Sprocket Nut KitDescriptionKit includes a nut, key retaining ring and left bearing oil slinger, which features a honed inner diameter. Fits:FL 1940-1952EL...

V-Twin - 10-0948 - Sprocket Shaft SpacerDescriptionFeatures built in seal flange to give added support for alternator rotor. Fits:FL 1970-1984FXST 1984-1998FXR 1982-1994FLT 1979-1998FX 1971-1984FXD...

V-Twin - 10-0947 - Finned Style Cast Cam Cover ChromeDescription4 fin style cam cover with the top oil bolt hole for overhead oiler models of Panhead. Forged construction features a chrome finish.Cam...

V-Twin - 10-0940 - WR Rod Cage and Roller SetDescriptionRod cage and roller set includes 4 cages, 18 long rollers and 36 short rollers.Set of four cages. Fits:XL 1957-1980WR 1936-1952Additional...

V-Twin - 10-0938 - Left Side Engine CaseDescriptionLeft side engine case for aluminum electric start inner primary application on 1965 Panhead and 1966-69 Flat Side Shovelhead engines.Left hand case...

V-Twin - 10-0937 - Left Side Panhead Engine CaseDescriptionLeft side engine case features a blank number boss.Left hand case must be fit to existing right side case. Number boss is blank. Will accept...

V-Twin - 10-0935 - Standard Solid Lightning Tappet SetDescriptionTappet set is solid type for Panheads. Units are precision machined and feature drilled holes which allow for better lubrication on...

V-Twin - 10-0923 - Steel Big Twin Tappet Block SetDescriptionBig Twin tappet block set with steel finish features countersunk screw holes to accept tapered screws for mounting.Inner diameter for...

V-Twin - 10-0921 - Crank Pin Plug SetDescriptionPlug set is press fit into TC-88 crank pin ends.Sold as a set of 2. Fits:FLT 1999-UPFLST 1999-2017FXST 1999-2017FXD 1999-2017Additional Information ...

V-Twin - 10-0917 - Primary Cam Drive ChainDescriptionPrimary cam drive chain, for TC-88 models. Fits:FXD 2006-2017FLST 2007-2017FLT 2007-UPFXST 2007-2017Additional Information OEM No.25675-06 UOM1...

V-Twin - 10-0915 - Secondary Cam Drive ChainDescriptionSteel secondary cam drive chain drives the cams on TC-88 models. Fits:FXST 2001-2017FLST 2001-2017FXD 2001-2017FLT 2001-2016Additional...

V-Twin - 10-0905 - Cam Drive Spacer .365Description.365 cam drive spacer is for TC-88 models. Fits:FLST 1999-2006FXST 1999-2006FLT 1999-2006FXD 1999-2005Additional Information OEM No.25675-99 UOM2...

V-Twin - 10-0889 - Pinion Shaft 8  TaperDescriptionMachined and ground to factory specifications. Fits:FLST 1987-1989FXST 1987-1989FLT 1987-1989FXR 1987-1989Additional Information OEM No.24006-87 ...

V-Twin - 10-0888 - Lightning Cam Chest KitDescriptionLightning cam chest kit is a 3 piece set with 3 gaskets. Fits:FL 1954-1969Additional Information UOM1 - KIT ManufacturerMotorshop ...

V-Twin - 10-0887 - Lightning Cam Chest KitDescriptionLightning cam chest kit is a 3 piece set with 3 gaskets. Fits:FL 1948-1953Additional Information UOM1 - KIT ManufacturerMotorshop ...

V-Twin - 10-0886 - Replica Hydraulic Tappet Assembly .010 OversizeDescriptionReplica .010 tappet assembly includes installed OE type roller and pin assembly with adjuster screws. Fits:FLT 1979-1983FX...

V-Twin - 10-0881 - Connecting Rod KitDescriptionKit includes new rods, crank pin, nuts, cages and standard rollers fitted and assembled.Piston pin bushings are installed and honed for stock wrist pin...

V-Twin - 10-0879 - Left Side UL Engine CaseDescriptionSide valve replacement left side engine case features a blank number boss. This case has the same oil passage for the outside sprocket shaft...

V-Twin - 10-0878 - Cam Chest Idler Gear Stud KitDescriptionCam chest idler gear stud kit.*NOTE: Does not include bushing. Fits:FL 1941-1969EL 1936-1952Additional Information UOM1 - KIT ...

V-Twin - 10-0876 - Replica Engine Sprocket ShaftDescriptionReplica machined and hardened to factory specifications.*NOTE: Without key. Fits:FL 1972-1981FX 1972-1981Additional Information OEM No...

V-Twin - 10-0875 - Replica Engine Pinion ShaftDescriptionReplica pinion shaft*NOTE: Must order key oil pump gear, key pinion gear and key sprocket shaft separately. Fits:FL 1973-1980FX 1973-1980FLT...

V-Twin - 10-0874 - Circuit Breaker Drive Gear StudDescriptionCircuit breaker drive gear stud for 1936-1969 Big Twin models.Includes the circuit breaker right thread stud screw and retaining ring...

V-Twin - 10-0857 - Cam Cover PolishedDescriptionPolished cam cover include bushings for cams for electric start models. Fits:XL 1986-1990Additional Information UOM1 - EA FinishPolished ...

V-Twin - 10-0856 - Left Side Crankcase Bearing SleeveDescriptionConverts 2003-up TC-88 models from a roller bearing to a Timken tapered bearing.Bearing is sold separately. Fits:FLST 2003-2017FXST...

V-Twin - 10-0853 - Oil Pump ShaftDescriptionOil pump shaft features chamfer on the end so there is no interfernce with the cover.*NOTE: Chamfer is like a smooth beveled edge. Fits:FL...

V-Twin - 10-0843 - Panhead Left Side Engine CaseDescriptionAccurately cast replacement Panhead left side engine case, wilth blank number boss.Left case utilizes loose roller bearings and cages. For...