Motorshop

V-Twin - 10-1096 - V-Twin Stock Flywheel AssemblyDescriptionShipped assembled and trued with shafts. Unit features full weight stock flywheels. Assembly is for 74" motor. Fits:FX 1973-1977FL...

V-Twin - 10-1091 - Stock Flywheel AssemblyDescriptionStock flywheel assembly is for 80" Evolution models only, assembled and trued with shafts at our V-Twin motor shop in New York.This assembly...

V-Twin - 10-1090 - 4-1/4 inch Stroke Flywheel AssemblyDescriptionFlywheel assembly with 4-1/4" stroke is shipped assembled and trued with shafts.Special 80" flywheel assembly is used for...

V-Twin - 10-1089 - 80 inch Overhead Valve Flywheel AssemblyDescriptionFlywheel assembly with 4-1/4" stroke is shipped assembled and trued with shafts. Sprocket shaft is correct length to use with...

V-Twin - 10-1082 - 74 inch Overhead Valve Flywheel AssemblyDescriptionShipped assembled and trued with shafts. Features a cast Sifton flywheel. Sprocket shaft is correct length to use with 1965-69 FL...

V-Twin - 10-1079 - Stock Flywheel AssemblyDescriptionFeatures full weight flywheels with removable pinion and sprocket shafts, trued and balanced for cast pistons.Unit includes forged and machined...

V-Twin - 10-1076 - Stock Flywheel AssemblyDescriptionFeatures full weight flywheels with removable pinion and sprocket shafts, trued and balanced for cast pistons.Unit includes forged and machined...

V-Twin - 10-1074 - Panhead Cylinder Heads with ValvesDescriptionV-Twin Motor Shop Ready single plug type Panheads are fully assembled and ready to install.Heads feature original contour castings with...

V-Twin - 10-1070 - 61 inch Flywheel AssemblyDescription61" flywheel shipped assembled and trued with shafts. Stroke is 3-1/2".Assembly is built using Truett and Osborne 61" Flywheels, with the late...

V-Twin - 10-1067 - Panhead Cylinder Heads Full AssemblyDescriptionV-Twin Motor Shop Ready Panheads are fully assembled and ready to install.Heads feature original contour castings with the added...

V-Twin - 10-1066 - Panhead Cylinder Heads Full AssemblyDescriptionV-Twin Motor Shop Ready Panheads come fully assembled and ready to install.Heads feature original contour castings with the added...

V-Twin - 10-1065 - Panhead Cylinder Heads Full AssemblyDescriptionV-Twin Motor Shop Ready Panheads are assembled and ready to install.Feature original contour castings with the added detail of the...

V-Twin - 10-1048 - V-Twin Stock Flywheel AssemblyDescriptionShipped assembled and trued with shafts. Features Truett & Osborne stock flywheels. Fits:FX 1971-1972FL 1970-1972Additional Information ...

V-Twin - 10-1045 - V-Twin Stock 80 inch Flywheel AssemblyDescription4-1/2" stroke 80" flywheel assembly is shipped assembled and trued with shafts. Features replaceable pinion and sprocket shafts...

V-Twin - 10-1042 - V-Twin Stock Flywheel AssemblyDescriptionShipped assembled and trued with shafts. Features replaceable pinion and sprocket shafts. Use on carbureted models only.Requires the...

V-Twin - 10-1035 - V-Twin Stock Flywheel AssemblyDescriptionShipped assembled and trued with shafts included. Fits:WL 1937-1952G 1937-1973DL 1929-1931W 1937-1952WL 1932-1936Additional Information ...

V-Twin - 10-1034 - V-Twin Stock Flywheel AssemblyDescriptionShipped assembled and trued with shafts. Fits:FL 1955-1957Additional Information OEM No.23907-55A UOM1 - EA ManufacturerMotorshop ...

V-Twin - 10-1033 - V-Twin Stock Flywheel AssemblyDescriptionShipped assembled and trued with shafts. Fits:FL 1954-1954Additional Information OEM No.23907-54 UOM1 - EA ManufacturerMotorshop ...

V-Twin - 10-1013 - UL-ULH Flywheel AssemblyDescriptionUL-ULH flywheel assembly is for 74 and 80" side valve flathead models. Shipped complete, assembled, balanced and trued with shafts. Fits:UL...

V-Twin - 10-1008 - 4 inch Stroke V-Twin Flywheel AssemblyDescriptionFlywheel assembly with 4" stock stroke is shipped assembled and trued with shafts.*NOTE: Tapered bearing shims for final assembly...

V-Twin - 10-1007 - V-Twin Stock Flywheel AssemblyDescription74" flywheel assembly is shipped assembled and trued with shafts, for 1941-1953 FL models. Fits:FL 1941-1953Additional Information UOM1 -...

V-Twin - 10-0991 - Left Side Engine CaseDescriptionCase is a reproduction of the original 45 cubic inch left side case, features a bare as cast aluminum finish.Case is blank, without serial numbers...

V-Twin - 10-0990 - Solid Lightning Tappet Set .010 OversizeDescriptionSifton solid tappet set includes installed roller assembly.Adjuster screws are not included. Fits:WL 1937-1952UL 1937-1948KH...

V-Twin - 10-0989 - Solid Lightning Tappet Set .005 OversizeDescriptionAssembly is .005 oversize with rollers installed.Adjuster screws are not included. Fits:WL 1937-1952UL 1937-1948KH 1954-1956G...

V-Twin - 10-0988 - Replica Zinc Plated Tappet Block SetDescriptionFront and rear replica tappet block set is constructed from steel featuring a zinc plated finish.The counter bore for the screws are...

V-Twin - 10-0987 - Replica Chrome Tappet Block SetDescriptionFront and rear replica tappet block set is constructed from cast iron featuring a chrome plated finish.The counter bore for the screws are...

V-Twin - 10-0980 - Knucklehead Engine Case SetDescriptionKnucklehead engine case set includes case bushings standard size rollers.Oil from top end returns through pushrod tubes. Does not return...

V-Twin - 10-0978 - Shovelhead Cam Chest Assembly KitDescriptionShovelhead cam chest kit includes a smooth finish cast cam cover and all internal parts for assembly.*NOTE: Check the pinion and cam...

V-Twin - 10-0977 - Right Side Engine CaseDescription45" right side engine case includes bronze cam bushings installed.*NOTE: This is the right hand case, requires case race to be installed when...

V-Twin - 10-0949 - Engine Sprocket Nut KitDescriptionKit includes a nut, key retaining ring and left bearing oil slinger, which features a honed inner diameter. Fits:FL 1940-1952EL...

V-Twin - 10-0948 - Sprocket Shaft SpacerDescriptionFeatures built in seal flange to give added support for alternator rotor. Fits:FL 1970-1984FXST 1984-1998FXR 1982-1994FLT 1979-1998FX 1971-1984FXD...

V-Twin - 10-0947 - Finned Style Cast Cam Cover ChromeDescription4 fin style cam cover with the top oil bolt hole for overhead oiler models of Panhead. Forged construction features a chrome finish.Cam...

V-Twin - 10-0940 - WR Rod Cage and Roller SetDescriptionRod cage and roller set includes 4 cages, 18 long rollers and 36 short rollers.Set of four cages. Fits:XL 1957-1980WR 1936-1952Additional...

V-Twin - 10-0938 - Left Side Engine CaseDescriptionLeft side engine case for aluminum electric start inner primary application on 1965 Panhead and 1966-69 Flat Side Shovelhead engines.Left hand case...

V-Twin - 10-0937 - Left Side Panhead Engine CaseDescriptionLeft side engine case features a blank number boss.Left hand case must be fit to existing right side case. Number boss is blank. Will accept...

V-Twin - 10-0935 - Standard Solid Lightning Tappet SetDescriptionTappet set is solid type for Panheads. Units are precision machined and feature drilled holes which allow for better lubrication on...

V-Twin - 10-0923 - Steel Big Twin Tappet Block SetDescriptionBig Twin tappet block set with steel finish features countersunk screw holes to accept tapered screws for mounting.Inner diameter for...

V-Twin - 10-0921 - Crank Pin Plug SetDescriptionPlug set is press fit into TC-88 crank pin ends.Sold as a set of 2. Fits:FLT 1999-UPFLST 1999-2017FXST 1999-2017FXD 1999-2017Additional Information ...

V-Twin - 10-0917 - Primary Cam Drive ChainDescriptionPrimary cam drive chain, for TC-88 models. Fits:FXD 2006-2017FLST 2007-2017FLT 2007-UPFXST 2007-2017Additional Information OEM No.25675-06 UOM1...

V-Twin - 10-0915 - Secondary Cam Drive ChainDescriptionSteel secondary cam drive chain drives the cams on TC-88 models. Fits:FXST 2001-2017FLST 2001-2017FXD 2001-2017FLT 2001-2016Additional...