Softail Clutch, Driveline & Trans

Jims - 1710 Outer Race Snap Ring fits '69-'02 Big Twin Models Features: Used for removing and installing the Timken® bearing outer race snap ring A must for replacing rings in OEM and aftermarket cases Made in the U.S.A...

Jims - 95660-85 Transmission Main Seal Driver fits '85-'06 Big Twin 5-Speed Models Features: Optional drivers used in conjunction with main shaft seal tool allow installation of seals Fitment 2002 Harley-Davidson Softail Fat Boy EFI...

Jims - 1720 Main Bearing Remover fits '80-'06 Big Twin 5-Speed Transmissions Models Features: Removes old bearing straight and will not damage the transmission case Can be used without removing transmission from the bike Made in the U.S.A...

Jims - 2234 Primary Drive Lock Tool fits '70-'06 Big Twin & '86-'22 Sportster Models Features: Use on all primaries between front primary chain and motor sprocket Made in the U.S.A. Fitment 2016-2017 Harley-Davidson 1200 Roadster...

Jims - 94547-80A Sprocket Shaft Bearing Race Tool fits '69-'02 Big Twin Models Features: Must use with JIMS® Race and Bearing Install Handle (PART# DS-196042) Used to remove and install Timken® bearing race on motor cases Made in the U.S.A...

Jims - 39361-69 Sprocket Shaft Seal Installation Tool fits '69-'10 Big Twin & Twin Cam Models Features: Designed to press oil seal over sprocket shaft into case Made in the U.S.A. Fitment 2010 Harley-Davidson Street Glide Trike...

Jims - 35316-80 5-Speed Main Drive Gear Tool fits '80-'06 Big Twin (Except '06 Dyna) & '91-'06 Sportster Models Features: Installs the main drive gear without removing the transmission Used to remove and install the main drive gear Made in the...

Jims - 34902-84 Mainshaft Bearing Race Tool fits 'L84-'20 Big Twin Models Features: Used to remove and install the inner bearing race on the transmission mainshaft Made in the U.S.A. Fitment 2016-2017 Harley-Davidson Fat Boy S...

Jims - 97225-55 Sprocket Shift Bearing Installation Tool fits '55-'02 Big Twin Models Features: Used on '84-'02 Big Twin to install the flywheel assembly to the left crankcase Timken® bearing Made in the U.S.A...

Jims - 94660-37A Counter Shaft Sprocket Locknut Wrench fits '36-'06 Big Twin Models (Except '06 Dyna) Features: Removes hex nut from end of main drive gear that secures the rear drive transmission pulley Extra-long two-piece design Made in the...

Jims - 95960-52C Clutch Hub Puller fits '36-'90 Big Twin Models Features: Used to remove wet and dry clutch hubs without removing clutch release rod 4 bolts included for dry clutch removal Made in the U.S.A...

Belt Drives Ltd. - BDLPCP-0007 Replacement Clutch Kit for Rivera Primo Pro Clutch fits '90-'97 Evolution Big Twin Models Features: Complete replacement clutch plate kits for Primo Rivera belt drives listed Include all friction plates, drive plates...

Belt Drives Ltd. - BDLPCP-0013 Replacement Clutch Kit for Rivera Primo Pro Clutch fits '98 Big Twin Models Features: Complete replacement clutch plate kit Include all friction plates, drive plates and backing plates...

Belt Drives Ltd. - 2" Drive Belt fits '00-'06 FXST/​FLST Models Features: Ball-bearing lockup clutch provides approximately 60% more surface contact area than the stock clutch for smooth, sure power transfer Kit includes motor plate, starter...

Belt Drives Ltd. - 3" Belt Drive fits '00-'06 FXST/​FLST Models Features: 3" electric start kits include front pulley, belt, clutch hub and clutch basket and aramid clutch set (consists of two half plates, four full plates and five steel drive...

Belt Drives Ltd. - 2" SS Belt Drive Without Cover fits '00-'06 FXST/​FLST Models Features: Beautiful styling and awesome performance 2" drive features a one-piece billet motor plate Clutch design eliminates clutch dogs and features an internal...

Belt Drives Ltd. - 1-5/8" Belt Drive Kit fits '00-'06 FXST/​FLST & '99-'05 Dyna Models Features: 1-5/8" kits include front pulley, belt, clutch hub, clutch basket and aramid clutch set (consists of two half plates, four full plates and five steel...

Belt Drives Ltd. - 2.75" Drive Belt fits '07-'17 Softail with Mechanical Clutch (Except FXSB/SE, FXCW/C) & '06-'17 Dyna w/ Forward Controls Features: Feature BDL's ball-bearing lockup clutch with ring gear Kit includes motor plate, 52-tooth...

Belt Drives Ltd. - 2" Black Belt Drive Kit fits '00-'06 FXST/​FLST Models Features: 2" drive kits loaded with style to accommodate custom trends All-billet construction with a unique top guard that provides long-lasting service and...

Belt Drives Ltd. - 2" Black Belt Drive Kit fits '07-'17 Softail (Except FXSB/SE, FXCW/C) & '06-'15 Dyna w/ Mechanical Clutch and Forward Controls Features: Features a two-piece motor plate design and 2" primary belt 52/69 pulley combination for...

Belt Drives Ltd. - 2" Black Drive Belt fits '18-'20 Softail Models (Except FLFB/​FXFB/​FXBR/​FXDRS) Features: Features a two-piece motor plate design and 2" primary belt 52/69 pulley combination for a 1.32:1 final drive ratio Belt profiles are...

Colony - 9653-4 3/8-16 x 3/8-24 Transmission Stud for '36-'83 4-Speed (STD.) (OEM #34724-36) Features: Studs are heat-treated for strength and durability Equal or surpass original equipment Made in the U.S.A...

Colony - 9401-1 Aluminum Transmission Plug fits '58-'80 Big Twin Models (OEM #701A) Features: Chrome-plated, cad or brushed aluminum fill plugs For 4-speed transmission models Made in the U.S.A. Fitment 1980 Harley-Davidson Wide Glide...

Colony - 9420-21 Chrome Transmission Mount Kit fits '84-'85 FXST, '80-'85 FX, '77-'84 FL Models Chrome transmission mount kit. Fitment: FXST 1984-1985 FX 1980-1985 FL 1977-1984

Colony - 9421-21 Zinc Transmission Mount Kit fits '84-'85 FXST, '80-'85 FX, '77-'84 FL Models Transmission mount kit with a zinc finish. Fitment: FXST 1984-1985 FX 1980-1985 FL 1977-1984

Colony - 9608-10 Rear Sprocket Bolt and Washer Kit Hex Type fits '79-'90 XL, '86-'98 FLST, '73-'84 FL/FX - Cast Wheel Rear sprocket bolt and washer kit is hex type with a 7/16-14 x 1-1/2" thread. Fitment: XL 1979-1990 cast wheel FLST 1986-1998 cast...

Colony - 9609-15 Rear Sprocket Bolt Kit Hex Type fits '86-'98 FLST, '84-'98 FXST, '73-'84 FL/FX Models - Spoke Wheel Rear sprocket bolt, nut, and washer set is hex type with a 7/16-14 x 1-1/2" thread. Fitment: FLST 1986-1998 spoke wheel FXST...

Colony - 9857-10 Sprocket Bolt, Nut and Washer Kit fits '79-'90 Sportster '84-'92 FXST/FLT/FXR Cast Wheel Models Custom sprocket bolt, nut and washer kit with a thread size of 7/16-14 X 1-1/2. Fitment: XL 1979-1990 cast wheel FLST 1986-1992 cast...

Colony - 9951-12 Chrome Transmission Shifter Cover Mount Kit fits '98-'06 FLST/FLT/FXST Models Chrome transmission shifter cover mount kit Fitment: FLST 1998-2006 FLT 1998-2006 FXST 1998-2006

Colony - 9952-11 Chrome Transmission Shifter Cover Mount Kit fits '98-'06 FLST/FLT/FXST Models Chrome transmission shifter cover mount kit Fitment: FLST 1998-2006 FLT 1998-2006 FXST 1998-2006

WD Bearing - Transmission Cover Bearing fits '91-'99 FXD, '82-'94 FXR, '86-'99 FLST/FXST Models (OEM #8998) Quality bearing for a 5-speed transmission cover is a high quality hardened steel bearing for improved reliability. Fitment: FXD...

Jims - 16-2320 M8 Primary Locking Tool fits '18-Up FLST/FXST Models Jims primary locking tool is used to lock the primary for service work on M8 models. Fitment: FLST 2018-UP FXST 2018-UP

Colony - Inner Primary Mount Kit fits '94-'99 FXST/​FLST Models (OEM #2818, 33318-85, 4086) Features: Kits include all required hardware needed to install an inner primary Made in the U.S.A. Replacement Part for...

Colony - Inner Primary Mount Kit fits '86-'93 FXST/​FLST Models (OEM #2818, 2871W, 33318-35) Features: Kits include all required hardware needed to install an inner primary Made in the U.S.A. Replacement Part for...

Colony - Inner Primary Mount Kit fits '80-'85 Big Twin 4-Speed Models (OEM #16830-54, 4021, 4722) Features: Kits include all required hardware needed to install an inner primary Made in the U.S.A...

Colony - Inner Primary Mount Kit fits '70-'79 Big Twin 4-Speed Models (OEM #16830-54, 4017, 4021) Features: Kits include all required hardware needed to install an inner primary Made in the U.S.A. Replacement Part for...

Colony - Primary Aluminum Acorn Hardware Kit fits '71-'86 Big Twin Models Features: Individual acorn bolt and nut sets for specific applications Made in the U.S.A. Fitment 1984-1985 Harley-Davidson Softail Standard...

Colony - 9655-4 1/2-13 x 3/8-24 Transmission Stud for '36-'83 4-Speed (O.S.) (OEM #34723-47) Features: Studs are heat-treated for strength and durability Equal or surpass original equipment Made in the U.S.A...

Colony - Acorn Front Belt Drive Pulley Nut fits '99-'06 Twin Cam Models Features: Chrome front pulley nut for open primary belt drive applications Made in the U.S.A. Fitment 2006 Harley-Davidson Softail Heritage EFI...

EBC - CSK Series Heavy Duty Clutch Spring Kit fits '17-'20 FLHT/​FLHR/​FLHX/​FLTRX/​FLTRU/​FLTRK & '17-'20 FLHTCUTG/​FLRT, '18-'20 FLFBS/​FLHCS/​FXBRS/​FXFBS 114” Models Features: Clutch spring sets made from tempered steel Clutch spring...