Softail Engine

Jims - 34623-83 Piston Pin Tool fits '84-'99 Big Twin (Except Twin Cam), '86-'03 Sportster Models Features: This tool will install “Round Circlip” rings in one easy step without distorting ring, for the safest wrist pin retention...

Jims - 34643-84 Valve Seal Installer for all Evolution Valve Guide Seals (OEM #34643-84) Features: Available from JIMS to allow the proper removal or installation of shoulderless valve guides as well as valve seals Made in the U.S.A...

Jims - 1010 Evolution Rod Alignment Tool for 0.791” Wrist Pin Features: Use to check rod straightness without removing the rods from the cases Made in the U.S.A. Fitment 2000 Harley-Davidson FXR...

Jims - 94805-57 Pinion Bushing Line Reamer fits '54-'99 Big Twin Models (Except Twin Cam) Features: Use on all Big Twin '54-'99 single cam only, (NOTE: Includes aftermarket motors, also XL '57 to early '84 idler gear bushing) Designed to line-ream...

Jims - 1041-TC Camshaft Cover Holder Tool fits '70-'99 Big Twin Models (Except Twin Cam) Features: Holds cam cover flat and helps prevent damage/scratches when removing and installing bushings Clamps in vice or Bridgeport™ mill Made in the U...

Jims - 95970-32C Piston Pin Bush Tool fits '36-'99 Big Twin, '57-'20 Sportster & Buell Models (Except 1125R) Features: Use to remove and install wrist pin bushings without removing rods from crankcase Made in the U.S.A...

Jims - 96600-36B Valve Spring Compressor Tool fits '36-'04 Big Twin & '57-'03 Sportster Models Features: Comes with new valve collar receiver for safer tool usage, and can be clamped in vice Hardened ball bearing style tip at valve head end...

Jims - 34731-84 Valve Guide Installer fits all Evolution & '99-'04 Twin Cam Models (OEM #34731-84) Features: Available from JIMS to allow the proper removal or installation of shoulderless valve guides as well as valve seals Made in the U.S.A...

Jims - 1047-TP Crank Assembly Removal Tool fits '55-'06 Big Twin Models (Except '06 Dyna) Features: This tool can only be used for removing the flywheel from the left case Will also press cases apart and break sealant bond Some case pressing will...

Jims - 1030-TS Crank Pin Flywheel Socket fits 'L83-'99 Big Twin Models (OEM #23969-83) Features: Machined for 100% nut-to-socket and drive-end contact Eliminate nut rounding and risk of injury Made in the U.S.A...

Jims - 1283 Camshaft Chain Tensioner Tool fits '99-'06 Twin Cam Models (Except '06 Dyna) Features: Designed to unload the pressure on the primary and secondary chain tensioners to assemble and disassemble cams Also checks spring loads on chain...

Custom Cycle Engineering - 41 mm Wide Glide Tweek Bar - Chrome Features: Original Randy Smith design As in the good old days with extended front tubes, the need for a tweek bar is here again Vast improvement over the tweek bars used in the 60s and...

Drag Specialties - 3-1/4" Chrome Magnetic Ring Oil Filter fits '86-'22 Sportster (Except RH Sportster), '09-'12 XR1200/X Models (OEM #63806-83, 63796-77A, 63805-80A) Features: High-quality chrome spin-on-style oil filters Magnetic filters are...

Drag Specialties - Oil Filter fits '86-'22 Sportster (Except RH Sportster), '09-'12 XR1200/X Models (OEM #63806-83, 63796-77A, 63805-80A) Features: High-quality spin-on filters are a dependable...

V-Twin - Panhead Style Evolution Rocker Box Set fits '84-'99 FXST/FLST, '84-'98 FLT/FXD Models - Chrome Panhead Evolution rocker box set features a bolt on Panhead look for Evolution models and a chrome finish. Retro conversion kit includes chrome...

V-Twin - Panhead Style Evolution Rocker Box Set fits '84-'99 FXST/FLST, '84-'98 FLT/FXD Models - Black Panhead Evolution rocker box set features a bolt on Panhead look for Evolution models and a black finish. Retro conversion kit includes black Panhead...

S&S Cycle - Stock Heads Intake Manifold O-Ring fits '84-'16 Big Twin, '86-'16 Sportster Models (OEM #26992-99, 26995-86A) Features: Sold Each Made from the highest-quality materials available Made in the USA Replacement Part for...

S&S Cycle - Billet Oil Pump fits '70-'91 Big Twin Models Features: Kit includes an oil pump with cover, mounting bolts, supply and return gears, drive shaft with keys and snap rings, check ball and spring, pressure relief valve and spring, check...

S&S Cycle - Replacement Billet Oil Pump Gasket Kit Features: Made in the U.S.A. Fitment 1999 Harley-Davidson Super Glide Sport FXDX - - 1999 Harley-Davidson FXR 3 - - 1999 Harley-Davidson FXR...

S&S Cycle - Oil Pump Replacement Gasket Kit fits '36-'69 Big Twin Models Features: Made in the U.S.A. Fitment 1991 Harley-Davidson Dyna Sturgis FXDB - - 1990-1991 Harley-Davidson Low Rider Convertible...

S&S Cycle - Rocker Arm Shafts fits '99-'17 Twin Cam & '86-'22 Sportster Models (Except RH Sportster (OEM #17611-83)) Features: Made in the U.S.A. Fitment 2018-2020 Harley-Davidson Iron 1200...

S&S Cycle - Rocker Box Gasket Kit fits EVO Big Twin Models Features: Replacement gasket kit for rocker box part number 90-4095 Fitment 2000 Harley-Davidson FXR 4 - - 1999 Harley-Davidson Softail Night Train...

S&S Cycle - Rocker Box Gasket Kit fits Twin Cam Models Features: Includes all required gaskets and O-rings for both rocker boxes Fitment 2017 Harley-Davidson Road King Special FLHRXS - - 2016-2017 Harley-Davidson CVO Pro...

S&S Cycle - Compression Release Hole Plug Features: Not for use on OEM heads Made in the U.S.A. Fitment 2016-2017 Harley-Davidson Fat Boy S FLSTFBS - - 2016-2017 Harley-Davidson Softail Slim S...

S&S Cycle - Adjustable Pushrods fits '99-'17 Twin Cam Models Features: .4375" diameter chromoly steel for maximum strength Rocker boxes must be removed for installation or removal Made in the U.S.A...

S&S Cycle - Tappet Alignment Tool fits 'L76-'17 Big Twin Models (Except M-Eight) Features: Big Twin Evolution tappet blocks do not have counter-bored bolt holes; therefore, when a tappet block is removed (or even just loosened) it should be...

S&S Cycle - Rocker Cover Wrench Set Features: Four wrenches of different lengths for those hard-to-get-to rocker box screws For use on all Big Twin and XL Evolution-style motors Made in the U.S.A...

S&S Cycle - Adjustable Pushrods fits '84-'99 Evolution Big Twin Models Features: .4375" diameter chromoly steel for maximum strength Rocker boxes must be removed for installation or removal Made in the U.S.A...

Feuling - Billet Cam Chain Tensioner fits '17-'25 Harley M8 Model Features: Tensioner housings are precision machined from billet 6061 aluminum, pads are injection-molded nylon with PTFE added to increase wear and friction resistance Replaces the...

Feuling - Hydraulic Camchain Tensioner Kit fits '17 & Up M8 Model Features: Install or replace hydraulic camchain tensioners on stock M8 models Kit includes out chain, outer crank 17 tooth crank sprocket, replacement camchain pad and pin, and...

Feuling - 487 Series Chain Drive Reaper® Camshaft fits M8 Model Features: Good for 4.25" stroke with 114"-117" engine looking for an agressive bolt in Produces a wide powerband Responds very well to increased bore and/or compression, exhaust...

Colony - 8610-1 5/8"-18 Crankcase/Oil Tank Hex Timing Plug fits '86-'95 Sportster Models (OEM #2326-26) Features: Timing plugs in a variety of styles and fitments Include kit for stripped timing plug...

Colony - 9884-20 Zinc Motor Case Bolt Kit fits '96-'98 Evolution Big Twin Models (OEM #3398, 3504A) Features: Includes all necessary hardware for bolting together the motor case Made in the U.S.A. Replacement Part for...

Colony - 9877-2 Cadmium Oil Screen Plug fits '70-'80 Big Twin Models (OEM #657) Features: Oil Screen plug for Big Twin models Made in the USA Fitment 1984 Harley-Davidson Electra Glide Special...

Cometic - Top End Gasket Kit fits '00-'06 FXST/FLST/FXD/FLT Models Cometic EST top end gasket kit. Fitment: 2000-2006 FXST 2000-2006 FLST 2000-2006 FXD 2000-2006 FLT Tech Note: Suggested to use with 107" Conversion Kit

Colony - 8931-16 Rocker Box Cover Allen Screw fits '84-'98 FXST/FLT, '86-'UP XL, '91-'98 FXD Models - Chrome Chrome rocker box cover allen screw kit Fitment: FXST 1984-1998 FLT 1984-1998 XL 1986-UP FXD 1991-1998 FXR 1984-1994 FLST 1986-1998

Colony - 9002-4 Cap Headbolt Cover fits '86-'98 FXST/FLT/FLST, '91-'98 FXD, 86-94 FXR Models - Chrome Chrome cap headbolt cover. Fitment: FXST 1986-1998 FLT 1986-1998 FXD 1991-1998 FXR 1986-1994 FLST 1986-1998

Colony - 9213-4 Inner Pushrod Cover fits '84-'98 FXST, '79-'98 FLT, '79-'84 FX/FL Models (OEM #17935-79) Inner pushrod cover. Fitment: FXST 1984-1998 FX 1979-1984 FLT 1979-1998 FXD 1991-1998 FXR 1984-1994 FL 1979-1984 FLST 1986-1998

Colony - 9306-7 Cam Cover Cadmium Screw Kit fits '70-'84 FL, '91-'92 FXD, '82-'92 FXR Models Cam cover screw kit with a cadmium finish. Fitment: FL 1970-1984 FXD 1991-1992 FXR 1982-1992 FX 1971-1984 FXST 1984-1992 FLT 1979-1992 FLST 1986-1992

Colony - 9402-1 Chrome Allen Timing Plug fits '84-'99 FXST, '91-'99 FXD, '82-'94 FXR Models Allen timing plug has a chrome finish. Fitment: FXST 1984-1999 FXD 1991-1999 FXR 1982-1994 FLST 1986-1999 FX 1971-1984 FLT 1979-1999 EL 1936-1940 FL...