Sportster 1200 Standard XLH1200

V-Twin - 51-1322 - Lowered Rear Axle Plate Set RawDescriptionLowered rear axle plates are threaded 3/8"-18 for fender brace sissy bar mounting. Adjusters threaded 3/8"-24 use screws for adjusters, to...

Engine bar features 1-1/4" tubing and foot rests with rubber pads. Hardware is not included. This will not work with forward controls.**WARNING: This engine/frame bar may provide limited leg and...

D+D XL raw rigid frame features a 1-1/4" thick wall, DOM steel tubing with 1-1/2" backbones, 30  rake and 0  stretch. This rigid frame is a basic starter frame.Frame will require custom 3/4" rear...

XL control mount set features a black finish. Control mounts for right (2 bolt plate) and left (3 bolt plate) to accept Big Twin forward controls.Set is used to mount 1941-1999 Big Twin forward mount...

V-Twin - 51-0484 - XL Hardtail Axle Plate SetDescriptionRaw set of right and left axle plates for Sportster hardtails, features 7/8" slots on both sides. Fits:XL 1982-UPAdditional Information<

Kit mounts to adapt 1957-1985 Ironhead motors into 1986-2003 XL rigid frames.Ironhead motor installation kit includes front and rear mounts and hardware. Fits:XL 1957-2003Additional Information

XL rear motor mount pad is the tall type, featuring a cast steel construction. Fits:XL 1982-2003Additional Information UOM1 - EA

XL rear motor mount pad is the short type, featuring a cast steel construction. Fits:XL 1982-2003Additional Information UOM1 - EA

Rear motor mount plate features a raw steel finish and is for use on custom frames. Fits:XL 1982-2003Additional Information UOM1 - EA

V-Twin - 51-0066 - Frame Motor Mount Tab RawDescriptionFrame motor mount tab must be welded on and features raw casting. Fits:XL 1982-UPAdditional Information

Rear motor mount frame plate features a raw steel finish and is for use on hardtails and custom frames. Fits:XL 1982-2003Additional Information UOM1 - EA

XL rigid frame neck is for the XL single loop rigid bobber frames. Fits:XL 1986-2003Additional Information UOM1 - EA

Rear motor mount casting features an investment cast construction and is for rigid frames. Fits:XL 1982-2003Additional Information UOM1 - EA <

Bobbed rear fender kit includes steel fender and chrome tail lamp bracket which includes cateye tail lamp.We suggest pre fitting fender prior to painting. Order chrome struts and covers separately. ...

V-Twin - 50-0625 - XL Rigid Tool Box KitDescriptionLeft side tool box kit is the weld on type for rigid frames on Sportster builds.*NOTE: Weld bracket to lower rigid frame hardtail tube position or...

Drag Specialties - DS750769 - Piston - XLFeaturesOEM quality cast aluminum alloy constructionSome fitments feature pistons with a coating that extends piston life, reduces friction and allows for...

Drag Specialties - DS750768 - Piston - XLFeaturesOEM quality cast aluminum alloy constructionSome fitments feature pistons with a coating that extends piston life, reduces friction and allows for...

Drag Specialties - DS750767 - Piston - XLFeaturesOEM quality cast aluminum alloy constructionSome fitments feature pistons with a coating that extends piston life, reduces friction and allows for...

Drag Specialties - DS750766 - Piston - XLFeaturesOEM quality cast aluminum alloy constructionSome fitments feature pistons with a coating that extends piston life, reduces friction and allows for...

Drag Specialties - DS720814 - Fender License Plate Mount - ChromeFeatures4" x 7" mount includes dual rubber gaskets, allowing the angle of the mount to be raised or lowered as neededIncludes all...

Drag Specialties - DS393482 - XLX-Style Front Fender with Chrome Side Braces - SteelFeaturesSteel construction with chromed side bracesDesigned for a close fit on 19" wheelSpecs

Drag Specialties - DS391285 - Replacement Mounting KitFeaturesReplacement mounting kit for rubber-mount Quickbob® gas tankSpecs

Drag Specialties - DS390448 - Clutch Cable Adjuster Cover - ChromeFeaturesReplaces the rubber boot found on most clutch cablesTwo-piece design is easy to install or remove when clutch needs...

Drag Specialties - DS380201 - Spoke Set - Drop Center - Front/Rear - Stainless Steel - 16"FeaturesStrong, quality spoke sets used in stock and custom applicationsAll sets include nipples and spoke...

Drag Specialties - DS380139 - Spoke Set - Front - Chrome - 8-1/4"FeaturesSpecial spokes and nipples for lacing to OEM-style steel or aluminum hubsAll sets include nipples and spoke wrench for...

Drag Specialties - DS380101 - Spoke Set - Drop Center - Front/Rear - Chrome - 16"FeaturesStrong, quality spoke sets used in stock and custom applicationsAll sets include nipples and spoke wrench for...

Drag Specialties - DS380038 - Front Fender ReplacementFeaturesOriginal-style fenderChrome fender brackets must be ordered separately.Replacement Part for OEM Number(s):5900773BSpecs

Drag Specialties - DS380031 - Front Fender Mount BracketsFeaturesBrackets with rivetsReplacement Part for OEM Number(s):5900773BSpecs

Drag Specialties - DS373917 - Points Cover - ChromeFeaturesHeavy-gauge steel replacement points coverReplacement Part for OEM Number(s):3258870ASpecs

Drag Specialties - DS325702 - Relay Switch - Starter - Harley DavidsonFeaturesDesigned to handle high-current draw with easeReplacement Part for OEM Number(s):3150679BSpecs

Drag Specialties - DS325647 - Circuit Breaker - 30A - Harley DavidsonFeaturesReplacement circuit breakerReplacement Part for OEM Number(s):7459977BSpecs

Drag Specialties - DS325646 - Circuit Breaker - 50A - Harley DavidsonFeaturesReplacement circuit breakerReplacement Part for OEM Number(s):7460094Specs

Drag Specialties - DS325288 - Sprocket Cover - Chrome - '82-'90 XLFeaturesHigh-quality cast aluminum constructionMount with existing OEM mounting hardwareReplacement Part for OEM...

Drag Specialties - DS324002 - Circuit Breaker - 40A - Harley DavidsonFeaturesReplacement circuit breakerSpecsRidi

Drag Specialties - DS324104 - Battery Cover - Smooth - ChromeFeaturesFeatures precise formed covers for sealed and conventional batteriesThe use of AGM sealed maintenance-free batteries requires...

Drag Specialties - DS324100 - Battery Cover - Raised - ChromeFeaturesFeatures precise formed covers for sealed and conventional batteriesThe use of AGM sealed maintenance-free batteries requires...

Drag Specialties - DS324001 - Circuit Breaker - 30A - Harley DavidsonFeaturesReplacement circuit breakerSpecsConn

Drag Specialties - DS305201 - Handlebar Wiring Harness Extension - Harley DavidsonFeaturesReplaces stock harness when converting to taller handlebars48" long wires and 38" long black covering allow...

Drag Specialties - DS305009 - Head Bolt/Spark Plug Covers - Chrome - XLFeaturesA step beyond individual headbolt covers and spark plug coversDrag and Billy Westbrook have teamed up to put an end to...

Drag Specialties - DS290723 - Handlebar Switch Housing Kit - ChromeFeaturesFeature chrome brake and clutch controlsDie-cast aluminum switch housings have radiused edges, OEM-style clamps, smooth tops...