Sportster Roadster XLS 1000

Badlands - ATS-04 - Turn Signal Module - Self-CancelingFeaturesWhen either the left or right turn signal button is pressed, our module will continue to flash until a speed above 7 mph is detected,...

Fire Power - CHD4-12 - Battery W/Acid Chd4-12 12VFeaturesGlobal Trade Item Number: 191361093203Meets or exceeds OEM specificationsExtremely strong polypropylene cases to withstand impacts and...

Black 1-3/4" exhaust pipe mounting bracket is used to mount drag pipes on mufflers with the use of T bolts. Originally BK-4, by Cycle Shack, 1970-2018. Bracket fits 1957-1978 XL models. Measures...

Chrome 16" sissy bar kit includes a 16" round bar and non-detachable side plates.Bar height is measured from the first bend to top. Fits: XL 1957-1978 Additional Information

New Old Stock" from 1980, rear hub cap is 4-prong, rusty raw steel style. Fits:XL 1952-1978Additional Information UOM1 - EA

AMF parts book for 1954-1978 Sportsters. Fits:XL 1954-1981Additional Information UOM1 - EA Manufacturer

Parts and manual set includes 3 different books for 1970-1984 Ironhead models.This set features the following books: Spare Parts Book for 1954-1965 XL, XLH Service and Parts Manual and V-Twin XL...

Decal set comes in a pair for both sides. Decal is silver with black lettering.Includes decals for lights, turn L, turn R, horn, engine stop, and start. Sold as a pair. Fits:XL 1972-1981FL...

V-Twin - Black Leather Solo Seat Kit fits '52-'78 Sportster Models Includes Bates style tuck and roll leather solo seat, chrome 2" spring and mounting hardware. Note: UPS may consider this part...

XLCH solo seat kit includes a replica black leather solo seat with a zinc front solo seat nose bracket, chrome seat spring support bar and a chrome 2" seat spring set.Solo seat kit requires frame to...

Our 8 gauge spoke set features 20 long and 20 short shank spokes, and 40 spoke nipples.Spokes are easy to clean and maintain. They are for use on a 19" front drop center rim with alloy front disc...

XR rear hub includes the bearings to accept a 11/16" axle and a 51 tooth sprocket.*NOTE: Rear sprocket adapter and lock nut tool included. Fits: XL 1957-1989 Additional Information

Chrome front wheel hub include bearings, races, seals, and seal spacersWhere the rotors bolt on, from flange to flange, measures 4-1/16". Fits:FXE-80 1978-1983FXEF 1978-1983 dual discFX 1978-1983...

V-Twin - 45-0155 - Cadmium 19 inch Spoke SetDescriptionFront cadmium spoke set features 20 long and 20 short shanks with spoke nipples.Spokes are easy to clean and maintain. For use on a drop center...

V-Twin - 44-1981 - Wheel Hub Bearing Tube Spacer 2.536 inch Overall LengthDescriptionFront wheel hub bearing tube gold spacer is 2.536" overall length and may be used in some cast mag wheel...

V-Twin - 44-1980 - Wheel Hub Bearing Tube Spacer 2.550 inch Overall LengthDescriptionFront wheel hub bearing tube pink spacer is 2.550" overall length and may be used in some cast mag wheel...

V-Twin - 44-1976 - Wheel Hub Bearing and Seal KitDescriptionWheel hub bearing and seal kit is a deluxe kit which includes 2 of each type of seal and 2 tapered bearings. Also used for swingarm...

V-Twin - 44-1960 - Swingarm Pivot Bolt KitDescriptionSwingarm pivot bolt kit includes swingarm pivot bolt in chrome, race set, bearing set, and lock tab. Fits:XL 1974-1981Additional Information

Kit includes 7-7/8" bearing surface length axle and nut kit. Fits:FXR 1982-1983XL 1978-1983FX 1978-1983Additional Information OEM No.43

Assembly includes race, bearing, dust shield, bearing spacers.Also included are the pivot pin, bolt, nut, spacer, right swingarm lock nut and lock tab. Fits:XL 1974-1981Additional Information

Chrome rear axle spacer collar. Fits:XL 1957-1978K 1952-1956Additional Information OEM No.41598-52 UO

Bearing kit includes two tapered bearings and two races.Bearing is a 1 piece pressed steel cage that retains rollers on the cone and spaces them evenly. Fits:FXD 1991-1999 Front and RearFL 1973-1984...

Rear wheel hub bearing race and seal kit includes two each of bearing, race, and proper seals. Fits:FXD 1991-1999 Front and RearFL 1973-1984 Front and RearFLT 1986-1999 RearXL 1979-1999 RearFX...

Front wheel bearing race and seal kit includes 2 each of the bearing, race and seals. Fits:FXD 1991-1999 Front and RearFLT 1986-1999 RearFX 1973-1984 Front and RearXL 1979-1999 RearFLST 1986-1999...

Front wheel bearing, race and seal kit includes 2 each bearings, race, and seals. Fits:FX 1973-1983 Cast or Wire WheelsFLH 1973-1979 Cast WheelsFXR 1982-1983 Cast or Wire WheelsXL 1973-1983 Cast or...

Tapered bearing minimizes friction. Bearing is for a 3/4" axle. Fits:FXD 1991-1999 Front and RearFL 1973-1984 Front and RearFLT 1986-1999 RearFX 1973-1984 Front and RearXL 1979-1999 RearFLST...

Swingarm bearing and race is for 3/4" axle.The cup outer ring has a 1.781" outside diameter, cone inner ring has a .75" inside diameter. Cone and cup assembly have a .656" width. Bearing and race are...

Rebuild kit includes inner spacer, 3/4" bearings, races, seals, seal spacers for rebuilding of alloy front hubs. Fits:XL 1978-1983FX 1978-1983Additional Information

Rear wheel hub bearing washer. Fits:XL 1957-1978K 1954-1956Additional Information OEM No.41195-63 UOM

Smooth speedometer drive spacer replaces drive units. Fits:XL 1973-1983FX 1973-1983Additional Information UOM1 - EA

Bearing spacer set. Fits:XL 1952-1981Additional Information OEM No.47518-52 UOM1 - SET

Chrome rear axle left side spacer has an overall length of 2".*NOTE: For 11/16" axle diameter. Fits:XL 1957-1978K 1952-1956Additional Information O

Rear wheel hub bearing tube spacer for 1963-1978 XL rear. Fits:XL 1963-1978 rearAdditional Information OEM No.41185-63

Front wheel hub bearing tube violet spacer may be used in some cast mag wheel appplications when flange is removed. Fits:FXD 1991-1999XL 1978-1999FXR 1984-1994FX 1978-1983Additional Information

Front left side axle spacer for dual disc has an overall length of 1/2". Fits:FXR 1982-1983XL 1978-1983FX 1979-1983Additional Information OEM No

Axle with flat head and threaded end has a 10-1/2" bearing surface lengthand can be used to replace a worn out or damaged axle. Threaded end measures 5/18 x 18.May be used in the Timken hubs, may...

Dust shield set for the swingarm. Fits:XL 1952-1981Additional Information OEM No.47519-52 UOM1 - SET<

Swingarm pivot bolt features a chrome finish. Fits:XL 1952-1981Additional Information OEM No.47511-52 UOM

Pivot pin nut. Fits:XL 1971-1981Additional Information OEM No.47512-74 UOM1 - EA

Pivot pin lock nut. Fits:XL 1974-1981Additional Information OEM No.47514-74 UOM1 - EA