Sportster Roadster XLS 1000

Badlands - ATS-04 - Turn Signal Module - Self-CancelingFeaturesWhen either the left or right turn signal button is pressed, our module will continue to flash until a speed above 7 mph is detected,...

New Old Stock" from 1980, rear hub cap is 4-prong, rusty raw steel style. Fits:XL 1952-1978Additional Information UOM1 - EA

AMF parts book for 1954-1978 Sportsters. Fits:XL 1954-1981Additional Information UOM1 - EA Manufacturer

Parts and manual set includes 3 different books for 1970-1984 Ironhead models.This set features the following books: Spare Parts Book for 1954-1965 XL, XLH Service and Parts Manual and V-Twin XL...

Decal set comes in a pair for both sides. Decal is silver with black lettering.Includes decals for lights, turn L, turn R, horn, engine stop, and start. Sold as a pair. Fits:XL 1972-1981FL...

V-Twin - Black Leather Solo Seat Kit fits '52-'78 Sportster Models Includes Bates style tuck and roll leather solo seat, chrome 2" spring and mounting hardware. Note: UPS may consider this part...

XLCH solo seat kit includes a replica black leather solo seat with a zinc front solo seat nose bracket, chrome seat spring support bar and a chrome 2" seat spring set.Solo seat kit requires frame to...

Our 8 gauge spoke set features 20 long and 20 short shank spokes, and 40 spoke nipples.Spokes are easy to clean and maintain. They are for use on a 19" front drop center rim with alloy front disc...

XR rear hub includes the bearings to accept a 11/16" axle and a 51 tooth sprocket.*NOTE: Rear sprocket adapter and lock nut tool included. Fits: XL 1957-1989 Additional Information

Chrome front wheel hub include bearings, races, seals, and seal spacersWhere the rotors bolt on, from flange to flange, measures 4-1/16". Fits:FXE-80 1978-1983FXEF 1978-1983 dual discFX 1978-1983...

V-Twin - 45-0155 - Cadmium 19 inch Spoke SetDescriptionFront cadmium spoke set features 20 long and 20 short shanks with spoke nipples.Spokes are easy to clean and maintain. For use on a drop center...

V-Twin - 44-1981 - Wheel Hub Bearing Tube Spacer 2.536 inch Overall LengthDescriptionFront wheel hub bearing tube gold spacer is 2.536" overall length and may be used in some cast mag wheel...

V-Twin - 44-1980 - Wheel Hub Bearing Tube Spacer 2.550 inch Overall LengthDescriptionFront wheel hub bearing tube pink spacer is 2.550" overall length and may be used in some cast mag wheel...

V-Twin - 44-1976 - Wheel Hub Bearing and Seal KitDescriptionWheel hub bearing and seal kit is a deluxe kit which includes 2 of each type of seal and 2 tapered bearings. Also used for swingarm...

V-Twin - 44-1960 - Swingarm Pivot Bolt KitDescriptionSwingarm pivot bolt kit includes swingarm pivot bolt in chrome, race set, bearing set, and lock tab. Fits:XL 1974-1981Additional Information

Kit includes 7-7/8" bearing surface length axle and nut kit. Fits:FXR 1982-1983XL 1978-1983FX 1978-1983Additional Information OEM No.43

Assembly includes race, bearing, dust shield, bearing spacers.Also included are the pivot pin, bolt, nut, spacer, right swingarm lock nut and lock tab. Fits:XL 1974-1981Additional Information

Chrome rear axle spacer collar. Fits:XL 1957-1978K 1952-1956Additional Information OEM No.41598-52 UO

Bearing kit includes two tapered bearings and two races.Bearing is a 1 piece pressed steel cage that retains rollers on the cone and spaces them evenly. Fits:FXD 1991-1999 Front and RearFL 1973-1984...

Rear wheel hub bearing race and seal kit includes two each of bearing, race, and proper seals. Fits:FXD 1991-1999 Front and RearFL 1973-1984 Front and RearFLT 1986-1999 RearXL 1979-1999 RearFX...

Front wheel bearing race and seal kit includes 2 each of the bearing, race and seals. Fits:FXD 1991-1999 Front and RearFLT 1986-1999 RearFX 1973-1984 Front and RearXL 1979-1999 RearFLST 1986-1999...

Front wheel bearing, race and seal kit includes 2 each bearings, race, and seals. Fits:FX 1973-1983 Cast or Wire WheelsFLH 1973-1979 Cast WheelsFXR 1982-1983 Cast or Wire WheelsXL 1973-1983 Cast or...

Tapered bearing minimizes friction. Bearing is for a 3/4" axle. Fits:FXD 1991-1999 Front and RearFL 1973-1984 Front and RearFLT 1986-1999 RearFX 1973-1984 Front and RearXL 1979-1999 RearFLST...

Swingarm bearing and race is for 3/4" axle.The cup outer ring has a 1.781" outside diameter, cone inner ring has a .75" inside diameter. Cone and cup assembly have a .656" width. Bearing and race are...

Rebuild kit includes inner spacer, 3/4" bearings, races, seals, seal spacers for rebuilding of alloy front hubs. Fits:XL 1978-1983FX 1978-1983Additional Information

Rear wheel hub bearing washer. Fits:XL 1957-1978K 1954-1956Additional Information OEM No.41195-63 UOM

Smooth speedometer drive spacer replaces drive units. Fits:XL 1973-1983FX 1973-1983Additional Information UOM1 - EA

Bearing spacer set. Fits:XL 1952-1981Additional Information OEM No.47518-52 UOM1 - SET

Chrome rear axle left side spacer has an overall length of 2".*NOTE: For 11/16" axle diameter. Fits:XL 1957-1978K 1952-1956Additional Information O

Rear wheel hub bearing tube spacer for 1963-1978 XL rear. Fits:XL 1963-1978 rearAdditional Information OEM No.41185-63

Front wheel hub bearing tube violet spacer may be used in some cast mag wheel appplications when flange is removed. Fits:FXD 1991-1999XL 1978-1999FXR 1984-1994FX 1978-1983Additional Information

Front left side axle spacer for dual disc has an overall length of 1/2". Fits:FXR 1982-1983XL 1978-1983FX 1979-1983Additional Information OEM No

Axle with flat head and threaded end has a 10-1/2" bearing surface lengthand can be used to replace a worn out or damaged axle. Threaded end measures 5/18 x 18.May be used in the Timken hubs, may...

Dust shield set for the swingarm. Fits:XL 1952-1981Additional Information OEM No.47519-52 UOM1 - SET<

Swingarm pivot bolt features a chrome finish. Fits:XL 1952-1981Additional Information OEM No.47511-52 UOM

Pivot pin nut. Fits:XL 1971-1981Additional Information OEM No.47512-74 UOM1 - EA

Pivot pin lock nut. Fits:XL 1974-1981Additional Information OEM No.47514-74 UOM1 - EA

Right side swingarm lock nut. Fits:XL 1974-1981Additional Information OEM No.47515-74 UOM1 - EA<

The covers fit over stock cam cases on XL models. There is no need to remove cam case or disturb cams or gears.Covers are held in place by existing bolts and related hardware as supplied. For use on...

Horn cover with a black finish for high note horns. Fits:FL 1976-1984FLT 1984-1990FXST 1984-1990XL 1965-1978FX 1976-1984Additional Information