Sportster XLH1000

Front wheel hub bearing tube green & orange spacer is 2.148" long for aluminum hub. Fits:FX 1973-1977 frontXL 1973-1977 frontAdditional Information OEM N

Front wheel seal spacer for single disc has an overall length of 1/4". Fits:XLH 1974-1977FX 1974-1977XL 1974-1977XLCH 1974-1977Additional Information

Axle with flat head and threaded end has a 10-1/2" bearing surface lengthand can be used to replace a worn out or damaged axle. Threaded end measures 5/18 x 18.May be used in the Timken hubs, may...

Axle with threaded end has a 7-5/8" bearing surface length and can be used to replace a worn out or damaged axle. Fits:XL 1973-1977 39mm ForksFX 1973-1977Additional Information

Dust shield set for the swingarm. Fits:XL 1952-1981Additional Information OEM No.47519-52 UOM1 - SET<

Swingarm pivot bolt features a chrome finish. Fits:XL 1952-1981Additional Information OEM No.47511-52 UOM

Pivot pin nut. Fits:XL 1971-1981Additional Information OEM No.47512-74 UOM1 - EA

Pivot pin lock nut. Fits:XL 1974-1981Additional Information OEM No.47514-74 UOM1 - EA

Right side swingarm lock nut. Fits:XL 1974-1981Additional Information OEM No.47515-74 UOM1 - EA<

Chrome engine dress up kit includes rocker shaft end nuts, sprocket cover, cam cover trim, outer primary cover. This kit also includes kick starter return spring and spring stud. Chrome hardware is...

The covers fit over stock cam cases on XL models. There is no need to remove cam case or disturb cams or gears.Covers are held in place by existing bolts and related hardware as supplied. For use on...

The covers fit over stock cam cases on XL models.Covers are held in place by existing bolts and related hardware. For use on electric start models. There is no need to remove cam case or disturb cams...

Battery carrier kit fits stock frames with a support bracket and ISO mounts included as required. Unit is chrome plated for XLH models.Includes battery tray support carrier bracket in a chrome finish...

Battery carrier kit fits stock frames with bracket and ISO mounts included as required. Unit features a black finish.Order battery top cover and strap kit separately. ...

Kit includes proper cover and hold down strap.Cover measures 2-1/2" x 7". Fits:XLH 1967-1978Additional Information UOM1 - KIT

Horn cover with a black finish for high note horns. Fits:FL 1976-1984FLT 1984-1990FXST 1984-1990XL 1965-1978FX 1976-1984Additional Information

Chrome ignition system cover has a flame mesh design. Fits:XL 1971-2003Additional Information UOM1 - EA Manufa

AMF XL ignition system cover features an alloy construction with center decal applied. Cover features vertical mount holes. Fits:XL 1971-1984Additional Information

Black air flow ignition system cover. Fits:XL 1971-2003Additional Information UOM1 - EA ManufacturerV

Ignition points cover is the vertical 2-hole style featuring a black finish with a skull design. Fits:XL 1971-2003Additional Information UOM1 - EA

Ignition points cover is the vertical 2-hole style featuring a chrome finish with a skull design. Fits:XL 1971-2003Additional Information UOM1 - EA<

V-Twin - 42-1190 - License Plate Bracket Curved Laydown Style BlackDescriptionBlack curved laydown style bracket with metal backing plate mounts to 3-hole tag mount on stock fender. Fits:FLT...

Black grooved ignition points cover is vertical 2-hole style. Fits:FXST 1984-1999FLT 1984-1999XL 1970-2003Additional Information UOM1 -

Chrome grooved ignition points cover is vertical 2-hole style. Fits:FXST 1984-1999FLT 1984-1999XL 1970-2003Additional Information UOM1

Top it off in style and add a chrome touch to your bike with this tachometer cover. Fits:XL 1974-1983Additional Information UOM1 - EA

V-Twin - 42-1110 - Chrome 2-Hole Perforated Ignition System CoverDescriptionChrome 2-hole perforated ignition system cover can be mounted vertically or horizontally. Fits:FXST 1984-1998FX 1971-UPFXR...

Chrome solenoid end coverOrder roller boot separately. Fits:FXR 1982-1988XL 1967-1980FL 1965-1984FX 1971-1984FXST 1984-1988FLT 1979-1988FLST 1986-1988Additional Information

V-Twin - 42-1009 - License Plate Bracket Curved Laydown Style Chrome BilletDescriptionChrome billet curved laydown style bracket with metal backing plate mounts to 3-hole tag mount on stock fender...

Kit includes a chrome sprocket cover to replace stock and chrome cam cover trim to fit over the existing one. Hardware is included.Designed for use on 1971-1976 XL models with electric start with...

Kit includes a chrome sprocket cover to replace stock and chrome cam cover trim to fit over the existing one. Hardware is included.Designed for use on 1971-1976 XL models with kick starter and...

Kit includes a chrome sprocket cover to replace stock and chrome cam cover trim to fit over the existing one. Hardware is included.Designed for use on 1971-1976 XL models with kick starter and chain...

Primary cover insert comes with a double stick adhesive strip. Constructed of metal featuring a chrome finish. Fits:XL 1971-1976Additional Information UOM

V-Twin - 42-0582 - Skull Design Ignition System CoverDescriptionBlack and chrome skull ignition system cover. Fits:XL 1971-UPAdditional Information

Chrome battery cover kit includes both top and side covers with correct stainless steel strap. Includes ribbed side cover. Fits:XLH 1967-1978Additional Information

Black 12 volt delco remy regulator cover.Use existing screws. Fits:FL 1964-1969XL 1967-1978Additional Information UOM1 - EA

Stainless Steel Battery strap. Fits:XLH 1967-1978Additional Information OEM No.66470-67 UOM1 - EA

Battery top cover with chrome finish. Fits:XLH 1967-1978Additional Information OEM No.66369-67 UOM1 -

Cover is ribbed with chrome finish. Fits:XLH 1967-1978Additional Information OEM No.66379-67 UOM1 - E

Chrome die cast headlamp mount with 2 large hole cutout. Fits:FX 1971-1973XL 1971-1974Additional Information OEM No.67807-73

Generator end cover for 2-brush generator features a chrome finish. Fits:FL 1958-1969XL 1958-1981Additional Information OEM No.30131-59