Sportster XLH1000

V-Twin - 31-0255 - Turn Signal Mounting Clamp Screw KitDescriptionTurn signal mounting kit contains 4 pieces, 2 short and 2 long screws. Fits:FXST 1984-UPFX 1973-1984XL 1973-UPFXR 1984-1994Additional...

Upper front motor mount chrome. Fits:XL 1982-1985Additional Information OEM No.16214-81 UOM1 - EA

Rear cast replacement, 2 bolt style motor mount. Fits:XLH 1982-1990 4-SpeedAdditional Information OEM No.16203-82A

V-Twin - 31-0206 - Chrome 12 inch Low Boyz Turn Signal Bar KitDescription12" long chrome low boyz bar is threaded to accept stock turn signals and mounts to license plate bracket holes. Fits:FL...

Chrome bracket set for front fork triple tree spotlamp mounting includes both right and left sides.The mounting holes measures 7-1/4" from eye to eye. Fits:XL 1952-1985Additional Information

V-Twin - 31-0158 - License Plate Frame Bracket ChromeDescriptionChrome 3 bolt license plate bracket for fender mounting. Fits:FXR 1982-1994FXD 1991-2017FX 1973-1984XL 1973-UPAdditional Information

Speedometer cable guide for front wheel drive models.Sold as a pack of 5. Fits:FX 1973-1984XL 1973-1984FL 1973-1984Additional Information

Zinc horn mounting plate replaces stock OE. Fits:XL 1971-1985Additional Information OEM No.69117-71A UOM<

Black horn bumper bracket is constructed of metal and replaces stock OE. Fits:XL 1973-1985Additional Information OEM No.69041-73

Chrome ignition coil mount bracket fits stock coil. Fits:XLCH 1971-1994XL 1971-1994Additional Information OEM No.31723-71A

Zinc horn mount bracket Fits:FX 1971-1972FL 1971-1972XL 1965-1985Additional Information OEM No.69117-65

Zinc upper horn and choke bracket Fits:XL 1972-1985Additional Information OEM No.69129-72A UOM1 - EA<

V-Twin - 31-0086 - License Plate Frame Bracket BlackDescriptionBlack 3 bolt license plate bracket for fender mounting. Fits:FXR 1982-1994FXD 1991-2017FX 1973-1984XL 1973-UPAdditional Information

Front solo seat nose bracket feautures a flat black finish.Bracket mounts to frame casting in the hole behind the rear gas tank mount. *NOTE: On 1957-1978 XL models, the bracket fits over the 2 tabs...

V-Twin - 31-0033 - Left Side Tool Box Mount RawDescriptionLeft side tool box one piece mount is constructed of raw steel for Sportster hardtail and rigid frame applications.Must be welded in place...

Chrome goose style drag pipes have a diameter of 1-3/4" and a length of 34". Use with heat shields.Set includes channel mounts. *NOTE: Does not come with heat shields. **CAUTION: These exhaust...

Chrome drag pipes features a 28" long front pipe and 38" long rear pipe, that will mount with stock brackets.Sold in a quantity of 2. On the front pipe the down part is 15" and the rear to the start...

Exhaust drag pipe set with formed heat shields come with 1-3/4" slash cut and is 38" long.Set of two. The customer may remove the front header clamp from the heat shield, to use (2) matching header...

Original multi-piece design includes chrome mufflers, header pipes and mount brackets.Tapered muffler set is custom seamless type for Ironhead models. Components available separately. Fits:XL...

Upsweep megaphone kit without heat shields. Includes one piece header pipe and two right hand megaphone muffler for a true "Stack" look. Accepts 1957-85 XL Ironhead motors. Kit is for use on rigid...

Alphabet Sportster exhaust header set features a raw finish. Set is used for Sportster Ironhead models.Set will fit stock Sportser models, including 1971-1984 models with forward controls and...

Alphabet Sportster exhaust header set features a black finish. Set is used for Sportster Ironhead models.Installation may not be compatible with some forward or mid controls. Front and rear header...

Alphabet Sportster exhaust header set features a chrome finish. Set is used for Sportster Ironhead models.Set will fit stock Sportster models, including 1971-1984 models with forward controls and...

Black 2:1 alphabet exhaust header set includes rear, forward wrap around and radiused front, to fit into 2 into 1 turn out muffler end.Set will fit stock Sportster models, including 1971-1984 models...

Chrome 2:1 exhaust header set includes rear, forward wrap around and radiused front, to fit into 2 into 1 turn out muffler end.*NOTE: Turn out end not included. Fits:XLH 1971-1984 900cc, 100ccXLCH...

Ironhead LAF exhaust header set features a black finish.*NOTE: Pipes attach to each other at the end. Additional mount bracket may be fabricated to mount set to frame. *NOTE: Exhaust header set is...

Ironhead LAF style header set features a chrome finish.*NOTE: Pipes attach to each other at the end. Additional mount bracket may be fabricated to mount set to frame. Fits:XL 1957-1985Additional...

Rear heat shield is chrome and for stock or drag exhaust pipes. Fits:XL 1957-1984Additional Information OEM No.65702-68B

Front heat shield is chrome and for stock or drag exhaust pipes. Fits:XL 1957-1984Additional Information OEM No.65728-66

Black 2:1 siamese hi-exhaust header with a 1-3/4" outer diameter, fits under the carburetor on rigid or swingarm frames, and features a one piece design for Ironheads only.One piece header will...

Chrome 2:1 hi-exhaust header with a 1-3/4" outer diameter, fits under the carburetor on rigid or swingarm frames. Features a one piece designOne piece header will require the installer to saw out...

Horn mount rubber stud measures 5/16" and is ISO type with male-male ends. Fits:FXST 1984-1989FL 1965-1984FX 1971-1984XL 1965-1985FLST 1986-1989Additional Information

Handlebar damper is nylon and provides stiffer dampening action and longer life. Fits: FXR 1982-1994 FXD 1991-2017 XL 1973-2003 FX 1973-1984 FLST 1986-2017 FXST 1984-2017 FL 1973-1984 Additional...

V-Twin - 28-2004 - Headlamp Boot RubberDescriptionRubber headlamp boot. Fits:FX 1974-1984XL 1974-1984Additional Information

V-Twin - 28-2002 - Master Cylinder Fluid Level WindowDescriptionFluid level window for handlebar master cylinder rebuild kit . Fluid level window is also stock OE replacement type. Fits:FLT...

Top bushing set Fits: FXD 1991-2005 FXR 1988-1994 XL 1954-1999 Additional Information UOM 1 - KIT

39mm rubber sleeve for 38mm flatslide carburetors. Fits:FX 1971-1984FL 1966-1984XL 1963-1984Additional Information UOM1 - EA

White 35mm fork boot is designed for a better fit and improved sealing and wiping action.Sold in a quanity of 2. Fits:FX 1975-1984FXR 1982-1987FXE 1975-1984XL 1975-1987FXS 1975-1984Additional...

Black rubber fork boot is designed for a better fit and improved sealing and wiping action.Sold in a quanity of 2. Fits:FX 1975-1984FXR 1982-1987FXE 1975-1984XL 1975-1987FXS 1975-1984Additional...

Tourist Trophy grip set constructed of real rubber features a 1-1/8" inner diameter on the throttle grip and 1" on the left grip.Sold in a quantity of 2. Fits:FXST 1984-1999FLT 1974-1999FXD...