Sportster XLH1000

Primary chain nylon pad. Fits:XL 1957-1976Additional Information OEM No.39978-58 UOM1 - EA

Nylon primary chain adjuster pads includes metal retainer Fits:XL 1957-1976Additional Information OEM No.39979-58A

AEE rubber shock bushings are for Big Twin models and are stock OE replacement type. Fits:FX 1971-1972XL 1954-1974FL 1958-1984Additional Information

Black driver footpeg rubbers are large diameter and for stock replacement.Sold in a quanity of 2. Fits:K 1952-1956FX 1971-1984XL 1957-1984Additional Information

Green grip set is molded plastic like original. Fits:FL 1962-1972XL 1962-1972Additional Information OEM No.56200-62A

Yellow grip set is molded plastic like original.Chrome end plugs available separately. Fits:FL 1962-1972XL 1962-1972Additional Information UOM

Blue grip set is molded plastic like original.Chrome end plugs available separately. Fits:FL 1962-1972XL 1962-1972Additional Information OEM No.

Red grip set is molded plastic like original.Chrome end plugs available separately. Fits:FL 1962-1972XL 1962-1972Additional Information OEM No.

Black waffle handlebar grip set are soft plastic and have an inner diameter of 1-1/8" and are 4" long with chrome plugs.Sold in a quanity of 2. Fits:FL 1953-1972FX 1971-1972XL 1953-1972Additional...

Replica white rib grip set is 1-1/8" ID and fits stock controls. Plastic construction.Sold in a quanity of 2. ...

Black Jack Hammer style grip set is 1" + 1/8" inner diameter to fit stock controls. Grip set features plastic construction.Original offering from V-Twin manufacturing over 30 years ago! Sold in a...

Black solenoid boot is molded rubber for use on 4 or 5-Speed starter solenoids.Replaces stock OE boot. Use with solenoid end cover. Fits:FXR 1982-1988XL 1967-1980FL 1965-1984FX 1971-1984FXST...

Female footpeg set for Sportster model driver applications. Constructed of machined female steel yoke finished with zinc plating and fitted with rubber slip on footpeg rubber.Rubber is replaceable...

Early style stock XL kickstand leg with a round end features a zinc finish and is 10-1/2" long. Fits:XL 1952-1979Additional Information UOM1 - EA

Chrome driver footpeg support set is spline type.Use with large female type driver pegs. Fits:XL 1952-1974Additional Information OEM No.50948-71

9-1/2" kickstand features a chrome finish.The pin is installed from the bottom and held in by a set screw, same as OEM. Fits:XL 1952-1979Additional Information

Early style stock XL kickstand leg with a round end features a chrome finish and is 10-1/2" long. Fits:XL 1952-1979Additional Information OEM No.50062-52

Driver footpeg support bar set is the splined type with a zinc finish. Use with large female type driver pegs. Fits:XL 1952-1974Additional Information OEM No.

Male and Female end mount footpeg sets with matching shifter peg with a unique soft rubber pad to reduce vibration.Includes large female end mount footpeg set, small male end cats paw footpeg set,...

Kickstand pin kit for stock length kickstand. Fits:XL 1952-1984Additional Information OEM No.50090-53 UOM

XL kickstand mount tab is contructed of raw steel. Mount tab accepts stock extended XL kickstands, available separately. For use with 1" tubing. Fits:XL 1957-1978Additional Information

Chrome passenger footpeg bracket bolts to rear motor mount bolts, for use on rigid or swingarm frames.Uses large female driver footpegs. Order footpegs and return springs separately. Fits:XL...

Center kickstand kit is constructed of cast aluminum and includes spring, and hardware for mounting to stock swingarm frames. Fits:XL 1957-1981K 1952-1956Additional Information

Rear wheel brake rod and cable adjusting nut features a cadmium finish. Fits:XL 1957-1978K 1952-1956KH 1952-1956Additional Information UOM<

Rear wheel brake rod and cable adjusting nut features a chrome finish. Fits:XL 1957-1978K 1952-1956KH 1952-1956Additional Information UOM

Handlebar control kit includes master cylinder with clamp, clutch handle with clamp, switch housings and bracket in a polished finish.Switch wiring is not included. The master cylinder has a 3/4"...

Kit includes master cylinder with clamp, clutch handle with clamp, chrome switch housings, black switches, and bracket.Handlebar wiring harness and switch assembly in this kit includes wire...

Chrome contour hand lever set are designed for easy grip. Fits:XL 1972-1981FL 1972-1981FX 1972-1981Additional Information UOM1 - SET

Handlebar control kit includes master cylinder with clamp, clutch handle with clamp, switch housings and bracket in a chrome finish.Switch wiring is not included. The master cylinder has a 3/4" bore...

Nylon bushing for hand lever Fits:FX 1971-1984XL 1968-1987FXR 1984-1987FXST 1984-1987FLT 1979-1987FLST 1986-1987FL 1968-1984Additional Information

V-Twin - 26-2099 - Polished Handlebar Master Cylinder AssemblyDescriptionPolished handlebar 3/4" bore master cylinder assembly includes the brake lever, stop light switch, reservoir cover, and all...

V-Twin - 26-2097 - Black Handlebar Master Cylinder and Clutch Lever AssemblyDescriptionBrake master cylinder has a 3/4" bore and includes the brake lever, reservoir cover, switch housing and all...

V-Twin - 26-2093 - Handlebar Control Kit BlackDescriptionBlack handlebar control kit includes black master cylinder, chrome brake and clutch levers, black switch housings and wired switches.The...

Master cylinder has a 3/4" bore and includes the brake lever, stop light switch, reservoir cover, and all internal components.Accepts a 10mm banjo bolt. Fits:XL 1972-1981FL 1972-1981FX...

Chrome angle fitting for the brake hose to the front master cylinder. Fits:XL 1972-1981FL 1972-1981Additional Information OEM No.43307-78

Front master cylinder plunger assembly hardware only. Fits:XL 1972-1981FL 1972-1981FX 1972-1981Additional Information UOM1 - KIT

Wide hand levers are formed to make them easier and more comfortable, for use on big twin models.Set of two. Lever shape is similar to those found on the 1996-up motorcycles. Can be used on 1972-1981...

3/4" handlebar master cylinder rebuild kit includes the plunger hardware. Fits:XL 1972-1981FL 1972-1981FX 1972-1981Additional Information UOM

Hand lever pivot pin set consists of one pin, one grease fit ting and one retaining ring. Fits:XL 1971-1981FL 1965-1981FX 1971-1981Additional Information

Polished hand lever is clutch or brake type. Fits:XL 1971-1981FL 1965-1981FX 1971-1981Additional Information OEM No.45024-65