Sportster XLH1000

Swivel tapered headlamp washers Fits:XL 1959-1995FX 1971-1984Additional Information OEM No.67815-59A

Zinc Ignition points plate mount screw set include washer assortment.Set includes (2) 8-32 x 1/2" long round head slot screws, (2) #8 flat washers and (2) #8 lock washers. Fits:FX 1971-1978FL...

Horn cover mount hardware includes 3 screws, 3 lock washers, 3 nuts, 1 speed nut and 1 spacer. Used to mount FX and FL horns. Fits:FXST 1984-1989FL 1965-1984FX 1971-1984XL 1965-1985FLST...

Drain plug is 1/8" National Pipe Thread, and can be used on a variety of applications.Plug can be used on lower fork sliders for FLH models and rocker arm covers, crank case, gear case, and oil pump...

Stainless steel exhaust header clamp bolt. Fits:XL 1957-1985FL 1948-1965Additional Information UOM1 - KIT

Brake rod adjuster nut Fits:XL 1957-1978K 1952-1956Additional Information OEM No.42264-52 UOM

Chrome primary cover cap set is for filler and clutch adjustment holes on XL models. These are machined smaller for special application.*NOTE: Threads are clearanced for fitting for installation on...

Polished primary cover cap set is for filler and clutch adjustment holes on XL models.*NOTE: For use with polished outer covers. ...

XL starter screw is stainless steel, round head and slotted that measures 1-64 x 1/4". Fits:XL 1967-1980Additional Information UOM10 - PK

V-Twin - 37-2096 - Phillips Head Chrome ScrewsDescriptionChrome 5/16"-24 phillips head screws for air cleaner and luggage rack applications. Fits:FXST 1984-1989FX 1971-1984WL 1941-1952UL 1941-1948FL...

Footpeg male bolt kit includes standard hex bolt and nyloc nut. 4 piece kit is zinc plated.Hex bolts are 3/8"-16 X 1-1/2". Nyloc nuts are 3/8 x 16. Fits:FXR 1982-1994XL 1969-1984Additional Information

M8 x 1-1/4mm x 40mm allen cap screw set for wide clamps.Sold as a pack of 10. Fits:XL 1957-1985FL 1948-1965Additional Information UOM10 -

Triple tree stem nut washer. Fits:FXR 1982-1986FX 1971-1984XL 1971-1986Additional Information UOM1 - EA

Oil tank mount kit. Fits:XLH 1967-1978Additional Information UOM1 - KIT ManufacturerV-Twin

Domed fork stem nut with a chrome finish. Fits:XL 1952-1977Additional Information UOM1 - EA Manufacturer<

Rear motor mount bolt kit.Order studs separately. Fits:XL 1954-1981Additional Information UOM1 - KIT Man

3/8" Internal biter lock washers Fits: XL 1971-1984 Additional Information OEM No. 7130W UOM 25

Chrome stock type primary cover filler and clutch hole cap are easily installed and removable with a standard primary plug wrench.Threaded plugs are 1-1/2" x 12 and 1-3/8" x 12T, not undersize...

Allen type rocker arm shaft plugs have a chrome finish and includes sockets and cups. Fits:FL 1971-1984FLT 1979-1983FX 1971-1984FXR 1982-1983XL 1971-1984Additional Information

Clutch cable in braided stainless steel with clear coat fits Sportster models.Stainless steel braided with clear coat clutch cable has a PVC sleeve. The braid is tightly woven for a bright, quality...

Cable kit is for one side with pull throttle. Kit includes all internal parts. Grips are not included. Features a vinyl cable casing. Kit is pull type.*NOTE: Spiral uses 1-1/8" inner diameter grips...

Replica brake cable measures 60" with inner and outer housing. This cable can be cut to desired length. Fits:K 1952-1956FX 1971-1972XL 1957-1972GE 1958-1971FL 1950-1971Additional Information

Tachometer drive gear assembly features a cadmium finish. Fits:XLH 1971-1980XLCH 1971-1980Additional Information OEM No.92097-71

Carburetor choke wire includes inner wire and thread size of 10-32. Fits:XL 1972-1978Additional Information OEM No.29216-72

Front Brake cable is a replacement core and casing. This cab le cable is 60" long and can be cut to proper length. Fits:K 1952-1956FX 1971-1972XL 1957-1972GE 1958-1971FL 1950-1971Additional...

Black carburetor choke knob.*NOTE: The knob is threaded to go onto the shaft. Fits:FL 1971-1984XL 1972-1978Additional Information OEM No.2

Black transmission drive speedometer cable with 16mm top nut . This cable has a length of 45.25". Fits:KH 1954-1956XLH 1957-1972Additional Information OE

Distributor Drive Tachometer Cable is 29-1/2" long and has a 16mm top nut.For use on 1970-1973 Sportster models with a distributor ignition. Fits:XL 1970-1973Additional Information

Carburetor choke tube only. Fits:XL 1972-1978FL 1971-1978Additional Information OEM No.29220-72 UOM

Replica outer throttle and spark control cable is 42" long and features a vinyl casing. Cable is a cone braided type multi-strand wire. May be shortened for specific applications.Cable is...

Choke cable assembly. Fits:XLH 1972-1979XLCH 1972-1979Additional Information UOM1 - SET Manufacturer<

Zinc brake cable adjuster for the front. Fits:K 1952-1956FX 1971-1972XL 1957-1972FL 1950-1971Additional Information OEM No.451

Chrome brake cable adjuster only for the front. Fits:XL 1952-1972FX 1971-1972FL 1950-1971Additional Information OEM No.45159-50

Black clutch cable has a casing length of 51.06" with adjuster and is 4" over stock. Total length is 58-1/2". Fits:XL 1971-1985Additional Information OEM No.

Black clutch cable feature heavy duty construction designed for reliability and longer service. This cable has a casing length of 47-7/8" with an overall length of 54-1/2". Fits:XL...

Clutch cable hand lever bushing features a zinc finish. Fits:XL 1971-1972Additional Information OEM No.38654-71

Petcock screen only, plastic. Fits:FL 1966-1974FX 1971-1974XL 1955-1974Additional Information OEM No.62096-69

Petcock is wing type with zinc finish has a 3/8" NPT and accepts a 5/16" fuel line. Includes screen and 2 handles, sliding control valve with reserve. Fits:FX 1971-1974XL 1955-1974FL...

V-Twin - 35-2030 - 47mm OKO Shorty Carburetor Kit BlackDescriptionBlack performance 47mm shorty carburetor kit will accept S&S bolt pattern air filter assemblies. It has a relocated accelerator pump...

Black intake manifold clamp set is a two piece o-ring type.*NOTE: Must order o-ring seals separately. Fits:FX 1971-1977FL 1955-1977XL 1955-1977Additional Information