Sportster XLH1100

V-Twin - 31-1758 - Oil Cooler BracketDescriptionBlack oil cooler bracket.The distance center to center measures 3-1/8". *NOTE: For the Sifton oil cooler Horizontal Mount Style. Fits:XL...

Black oil tank base plate for mounting rigid oil tank.For rigid frame tank oil compartment is in front of center post. This base fits around tube and connects to the 2 top rear motor mount bolts. Oil...

XL side mount bracket raw steel mounts to outer primary to attach a side mount vertical license plate. Fits:XL 1986-2003Additional Information UOM1 - EA<

Key switch bracket features a stainless steel construction finish. Switch hole is 3/4" to accept mini key ignition switch.Switch bracket accepts switches with 3/4" threaded body. Fits:XL...

V-Twin - 31-1473 - License Plate Relocation Bracket BlackDescriptionBlack license plate relocation bracket. Relocates plate to above tail lamp. Fits behind late style tail lamps mounted on fender...

V-Twin - 31-1472 - License Plate Relocation Bracket ChromeDescriptionChrome license plate relocation bracket. Relocates plate to above tail lamp. Fits behind late style tail lamps mounted on fender...

Carburetor support bracket features a zinc plated finish.For Bendix an Keihin butterfly carburetors only, not for CV type. Fits:FL 1972-1984FLT 1985-1992XL 1972-1987Additional Information

V-Twin - 31-1177 - Oil Cooler BracketDescriptionBlack oil cooler bracket Fits:XL 1982-UPAdditional Information UOM1 - EA

Exhaust bracket for 2" Curvado pipe set.*NOTE: Must order hardware separately. Fits:XL 1986-2003Additional Information UOM1 - EA

Side mount bracket mounts to stock swingarm and is chrome billet. This bracket will accept vertical or horizontal billet tail lamp assemblies from our selection.Order nut set separately. Fits:XL...

Chrome billet motor mount accepts the stock coil bracket and stock horn mount bracket.Custom application on 1984-2003 XL Fits:XL 1986-2003Additional Information

Top motor mount chrome attaches the top front of the engine to the frame on 1200 XL models.Mount features chrome edges however chrome on the top portion is not a polished chrome. Fits:XL...

Seat mount kit. Fits:XL 1982-2003Additional Information UOM1 - KIT ManufacturerV-Twin

V-Twin - 31-0271 - License Plate Frame Bracket Kit ChromeDescriptionLicense plate kit includes stock style 3-hole bracket assembly, license backing plate, frame and 4 krommets.For show or off road...

V-Twin - 31-0255 - Turn Signal Mounting Clamp Screw KitDescriptionTurn signal mounting kit contains 4 pieces, 2 short and 2 long screws. Fits:FXST 1984-UPFX 1973-1984XL 1973-UPFXR 1984-1994Additional...

Rear cast replacement, 2 bolt style motor mount. Fits:XLH 1982-1990 4-SpeedAdditional Information OEM No.16203-82A

V-Twin - 31-0206 - Chrome 12 inch Low Boyz Turn Signal Bar KitDescription12" long chrome low boyz bar is threaded to accept stock turn signals and mounts to license plate bracket holes. Fits:FL...

V-Twin - 31-0158 - License Plate Frame Bracket ChromeDescriptionChrome 3 bolt license plate bracket for fender mounting. Fits:FXR 1982-1994FXD 1991-2017FX 1973-1984XL 1973-UPAdditional Information

Chrome ignition coil mount bracket fits stock coil. Fits:XLCH 1971-1994XL 1971-1994Additional Information OEM No.31723-71A

V-Twin - 31-0086 - License Plate Frame Bracket BlackDescriptionBlack 3 bolt license plate bracket for fender mounting. Fits:FXR 1982-1994FXD 1991-2017FX 1973-1984XL 1973-UPAdditional Information

V-Twin - 31-0033 - Left Side Tool Box Mount RawDescriptionLeft side tool box one piece mount is constructed of raw steel for Sportster hardtail and rigid frame applications.Must be welded in place...

Black heavy duty top motor mount features a convenient spot to relocate your ignition switch and the option of a CV carburetor choke mounting slot.Includes coil mount. Fits:XL 1986-2003 will not work...

Heat shield set with holes features a chrome finish for XL models. Fits:XL 1986-2003Additional Information UOM1 - SET

Heat shield set with holes features a black finish for XL models. Fits:XL 1986-2003Additional Information UOM1 - SET

Heat shield set chrome for drag pipes. Fits:XL 1986-2003Additional Information OEM No.67512-86 UOM1 -

Chrome 40" drag pipe set has a diameter of 1-3/4" and features black slash cut tips.Pipe set will not fit kick start models. **CAUTION: These exhaust products are not legal for sale or use in...

Curved radius exhaust header is chrome plated and features a 2" diameter and slash cut ends.*NOTE: Does not have baffles. Fits:XL 1986-2003Additional Information

Front and rear 1-3/4" header pipes are a one piece seamless design, integrating tapered mufflers. Features bolt on installation.Required to use with an exhaust pipe mount bracket and muffler T bolt...

XL muffler kit includes two seamless mufflers with inlet clamps and chrome support bar. Kit is for use with Ironhead models and 1-3/4" drag pipes that are cut to length to use with header pipe.Header...

V-Twin - 30-0735 - Wyatt Gatling Drag Pipe Set Down TypeDescriptionBlack drag exhaust straight pipe set with down draft style has 1-3/4" outer diameter construction for rear application Bracket...

XL exhaust system features a chrome finish. System includes one piece seamless design with tapered mufflers welded and blended into a 1-3/4" header pipe.Heat shields are highly recommended. *NOTE:...

2:1 siamese exhaust header set features a black finish. The pipes fit over the cam cover for the "Tourist Trophy" race look.Order replacement t-bolts, if required. Does not include oxygen sensor...

Black exhaust header set with down draft style features a 2" outer diameter construction and oxygen sensor ports welded in place.For Evolution, TC-88, and XL models as listed. Pipes feature 18mm...

Chrome exhaust header set features down draft style slash cut ends with a " outer diameter and oxygen sensor ports welded in place. Bracket included that connects the 2 header pipes together, does...

Chrome 2-1/4" exhaust drag pipe set side slash style features built in mount tabs to bolt to stock bracket.Will work with forward control or mid control models. *NOTE: Hardware not included, must...

V-Twin - 30-0329 - Exhaust Taper Valves ExtrudedDescriptionSteel exhaust taper valves fit into exhaust between pipe and head to put back the low end torque which is lost when large diameter or...

Sportster holeshot 2:1 exhaust header system features a black finish. System includes 2" header pipes, form fitted 2-1/4" headshield and a 3" baffled muffler. Rear pipe flows forward and wraps around...

Sportster holeshot 2:1 exhaust header system features a chrome finish. System includes 2" header pipes, form fitted 2-1/4" headshield and a 3" baffled muffler. Rear pipe flows forward and wraps...

Wyatt Gatling lake style exhaust system is for Sportster models and features a black finish. Exhaust will fit 1985-2004 XL models with mid or forward controls.Exhaust features 2" header pipes, non...

Wyatt Gatling lake style exhaust system is for Sportster models and features a chrome finish. Exhaust will fit 1985-2004 XL models with mid or forward controls.Exhaust features 2" header pipes, non...