Sportster XLH900

Replica pin is for 1961-1974 oil pumps measure .094 x .488. Fits:XL 1962-1971 Late 1962Additional Information OEM No.240

Pin is for 1961-1971 oil pumps measure .094 x .488.A oil pump feed gear is required to use, order separately. Fits:XL 1962-1971 Late 1962Additional Information

XL oil pump feed gear. Fits:XL 1963-1976Additional Information OEM No.26323-62 UOM1 - EA <

Shifter pawl retaining ring. Fits:FX 1979-1984XL 1957-1990FL 1979-1984Additional Information OEM No.11036

Wrist pin locks come in a pack of 10. Fits:FX 1971-1977K 1952-1956FL 1952-1977XL 1957-1985Additional Information OEM No.22582-

Rocker Arm Shim, .007 for 1966-1984 Big Twin, 1957-1984 XL Fits:FLT 1979-1983FX 1971-1984FXR 1982-1983FL 1966-1984XL 1957-1985Additional Information

Cam shim .005, fits #1,3,4 cams for XL and Flathead models. Fits:UL 1937-1948XL 1957-1985WL 1932-1952G 1932-1973Additional Information

Cam shim .007, fits #1,3,4 cams for XL and Flathead models. Fits:UL 1937-1948XL 1957-1985WL 1932-1952G 1932-1973Additional Information

Rocker arm shim .005 for 1966-1984 Big Twin and 1957-1984 Sportster Fits:FLT 1979-1983FX 1971-1984FXR 1982-1983FL 1966-1984XL 1957-1985Additional Information

V-Twin - 12-0158 - 3/8 inch Ball BearingsDescription3/8" ball bearing set for use with clutch or fork neck cups.Sold as a pack of 25. Fits:FXST 1984-1999FX 1971-1984 oil pump check valveFLT...

V-Twin - 12-0129 - 3/8 inch Ball BearingsDescription3/8" nylon ball bearings. Fits:FXST 1984-1999XL 1957-UPFXD 1991-1999FLST 1986-1999FX 1971-1984FL 1941-1984FXR 1984-1994Additional Information

Rowe cast piston ring set is for a 3" bore and is .050 oversize. Features compression rings with a size of 1/16" and 3 piece oil rings with the size of 3/16".Sold as a pair for 2 pistons. Fits:XL...

Exhaust valve, chrome Fits:XL 1958-1985Additional Information OEM No.18080-58A UOM1 - EA <

XL rear chain adjuster is zinc plated and is for use with 3/4" rear axles on custom Rigid applications.Order bracket separately, as required. Fits:XL 1957-1977Additional Information

Transmission engine hex drain plug 1/2" X 13 thread, zinc. Fits:XL 1957-1976 Engine and TransmissionFL 1941-1984 TransmissionFX 1971-1984 TransmissionAdditional Information

Chrome front motor mount acorn style bolts are extra long at 7.5". Fits:XL 1957-1983Additional Information UOM1 - KIT

Shock stud kit includes all pieces for upper and lower positions. Kit includes washers, nut and lock washers. Kit features a zinc finish. Fits:XL 1956-1974Additional Information

Zinc Nyloc shock stud nut is 5/8-18 UNC thread. Fits:XL 1957-1974KH 1954-1956FX 1971-1984FL 1958-1984Additional Information OEM No.

Chrome 5/8" hole cup shock stud washers Fits:XLH 1965-1974FX 1971-1972FL 1965-1972Additional Information UOM10 - PK

Lower shock zinc stud kit includes 4 cup washers and 2 studs. Fits:XL 1956-1974Additional Information OEM No.54516-72

Rear upper shock stud kit includes 4 cup washers and 2 studs. Fits:XL 1956-1974Additional Information OEM No.54515-56B

16" x 3.0." rear wheel and brake drum assembly includes an all chrome wheel, brake drum, chrome backing plate and chrome axle kit.Order chrome brake arm separately. ...

16" x 3.00 rear wheel assembly with chrome hub and bearings installed, black rim, and chrome spokes.*NOTE: The valve stem hole is on the sprocket side. **NOTE: All spokes on wheel need to be...

Replica chrome front 19" X 2.5" drop center wheel rim with 40 spoke holes and an 8.5mm center stem valve hole.Rim has original style edge. ...

KH replica chrome front conventional wheel rim.Early conventional KH rim, with a rolled inner seam, not welded. *Note: UPS may consider this part as packaged "oversize" for shipment, as compared to...

18" x 2.15" wheel assembly includes a 40 hole chrome rim, 21 cadmium spokes and a black rear hub, with all internal installed, laced and trued.Accepts a 400-450 x 18" tire. *NOTE: All spokes on wheel...

These rear wheel assemblies start with a 40 hole 18" x 2.5" chrome rim, single flange, 40 stainless spokes and a rear hub.Wheel is laced and trued. Accepts a 130-140 tire size. ...

Rear wheel assembly include a 18" x 2.5" chrome rim, 40 chrome spokes, and a rear hub. Wheel is laced and trued. Accepts a 130-140 tire size.NOTE: All spokes on wheel need to be inspected and...

This rear 18" x 2.15" wheel assembly includes a 40 hole chrome rim, 40 stainless steel spokes and a rear hub with bearings installed, laced and trued. Accepts a 130-140 tire size.NOTE: All spokes on...

Rear wheel assembly includes 18" x 2.15" chrome conventional style rolled rim, 40 chrome spokes and a rear hub. Wheel is laced and trued. Accepts a 100-120 tire size.NOTE: All spokes on wheel need to...

Features a 16" x 3.00" drop center rim with a large valve stem hole, 40 chrome twirled spokes and a hub with bearings installed.NOTE: All spokes on wheel need to be inspected and re-torqued after 500...

These rear wheel assemblies start with a 40 hole 16" x 3" chrome rim, 40 polished stainless steel spokes and a rear hub with bearings installed. Accepts a 130-140 tire size.NOTE: All spokes on wheel...

V-Twin - 52-0511 - 19 inch XL Front Wheel Assembly Description 19" big drum front wheel assembly includes polished drum with internals, conventional KH chrome replica rim and 40 stainless steel...

16" x 3.00 rear wheel assembly with chrome hub and bearings installed, chrome rim, and chrome spokes.*NOTE: The valve stem hole is on the sprocket side. **NOTE: All spokes on wheel need to be...

H-C type 2.15" x 19" alloy rim features a polished natural finish and has 40 spoke holes.Exact as original! Rim is drilled to fit Harley type applications on smaller diameter hubs. CV hole measures...

H-C type 2.15 x 18" alloy wheel rim features a polished natural finish and has 40 spoke holes.Exact as original! Outside measurement flange to flange is 2-7/8", inside diameter at bead pattern area...

200 XL rigid frame features a 40  rake with a 3" stretch in front legs to accept a 1-1/8" belt with 200 series tire.Frame has kickstand tab and battery box mount welded in place. Accepts a right side...

Footpeg support bar set is the splined type featuring a raw steel construction.Attaches to early Sportster frames to mount footpeg stanchions. One end is splined and the other fits over the frame...

Raw steel weld-on hardtail features a raw steel finish.Replaces entire rear section of the frame, for the full rigid look. *NOTE: Must be installed by a certified welder. Fits:XL 1957-1978Additional...

Frame hardtail is bolt on type. Accepts drum style brakes on a rigid frame.Unit should be aligned for chain clearance prior to final bolting. DIY hardtail is easy to install as the alignment is...