Sportster XLH900

Black oval air cleaner cover.Holes are 4" apart center hole to center hole. Fits:FL 1971-1984FXST 1984-1989FX 1971-1984XL 1966-2003FLST 1986-1989FLT 1979-1989Additional Information

Teardrop air cleaner cover assembly is made of steel and has a smooth chrome finish. For use with Bendix and Keihin type carburetors.*NOTE: Backing plate and teardrop cover are of stamped steel...

V-Twin - 33-1955 - Chrome Tail Lamp and Bracket KitDescriptionChrome early style tail lamp with plate bracket and gasket. Fits:FL 1955-1972FX 1971-1972XL 1955-1972Additional Information

XL guide lens tail lamp assembly features a primer finish with the internals, a 6 volt bulb, a plastic top license plate lens and a guide glass lens for detail. Fits:FL 1955-1972XL...

Replica primer tail lamp includes A 12 volt 23/8 watt clear bulb, lens housing, plastic red lens and internals.A replica red galss lens in included, but uninstalled. *NOTE: Order gasket separately...

Original style chrome 12 volt tail lamp includes additional plastic lens with blue dot installed. Fits:FL 1955-1972XL 1957-1972Additional Information UOM

V-Twin - 33-0838 - Chrome 1955 Style Tail Lamp KitDescriptionChrome 1955 style tail lamp kit includes plastic lens, mount gasket and additioinal lens with blue dot.Installed for custom installation...

Replica black 5-3/4" stock style headlamp includes 12 volt sealed beam and has two studs on the back for wiring.*NOTE: For show or decorative use only and are not D.O.T. approved. Fits:XL 1954-1973FX...

Replica chrome 5-3/4" stock style headlamp includes 12 volt sealed beam and has two studs on the back for wiring.*NOTE: For show or decorative use only and are not D.O.T. approved. Fits:XL...

Wiring harness kit features cloth covered, color coded wire as original. Wiring kit fits XLH battery type models. Fits:XLH 1965-1966 12 volt battery XLH modelsAdditional Information

Magneto advance arm with magnet.The magnet is used to hold the arm in position by adhering to the points cover screw. Fits:FL 1941-1969XL 1957-1970G 1937-1973Additional Information

Magneto advance post for advance arm kit. Fits:FL 1941-1969XL 1957-1970G 1937-1973Additional Information UOM1 - EA

XLCH Magneto advance assembly includes all necessary pieces to have a cable operated advance on XL-WL magnetos. Fits:XL 1957-1970Additional Information UOM

Burkhard magneto retard kit includes a clear top, gasket, ignition points and condenser kit and arm with mount pin for installation.This kit is for right hand (clockwise) rotation magnetos, XLCH...

XL 12 volt alternator gear kit includes gear, nut, spacer and deflector washer. Kit is for 32E 12 volt style alternator.Accepts 1/4 or 5/16 mount screws. Fits:XL 1958-1983Additional Information

Chrome alternator bolts on in place of original 12 volt generator. Chome state regulator, gear, gasket and mount screw set are included.*NOTE: The outer cover with the large hex nut houses the rotor...

Black alternator bolts on in place of original 12 volt generator. Black solid state regulator, gear, gasket and mount screw set are included.*NOTE: The outer cover with the large hex nut houses the...

Magneto retard lever set for Burkhardt magnetos. Fits:FL 1941-1969XL 1957-1970G 1937-1973Additional Information UOM1 - SET <

Steel fork boot retainer washer for XL models.Sold in a quantity of 2. Fits:XL 1957-1970Additional Information OEM No.46010-54

Zinc horn bracket for left side Fits:XL 1952-1984Additional Information OEM No.69031-57 UOM1 - EA

Includes seat plunger kit, seat "T", and pivot bolt. Fits:XL 1954-1970Additional Information UOM1 - KIT Manufa

V-Twin - 31-4057 - Exhaust Bracket ChromeDescriptionChrome exhaust bracket is for mounting drag pipes on mufflers with the use of T bolts.Originally BK-4, by Cycle Shack, 1970-2018. Bracket fits...

Solo seat hardware mount kit includes nose brackets, springs and rear bracketsUse mount kit for smaller type solos such as K or CH types. Fits:XL 1952-1978Additional Information

Black exhaust support tube mounts drag pipes or stock mufflerrs system to 1958-1979 XL-XLH models Fits:XL 1958-1978Additional Information OEM No.65316-65

Distributor breaker hold down clamp. Fits:XL 1952-1970WL 1936-1973Additional Information OEM No.32515-66

Chrome allen exhaust clamp set feature a unique design which allows the bolt to be nearer the exhaust pipe for positive clamping strength which permits easy access with hex wrench. Clamp set is extra...

Chrome allen exhaust clamp set feature a unique design which allows the bolt to be nearer the exhaust pipe for positive clamping strength which permits easy access with hex wrench. Clamp set is...

Stainless steel exhaust clamps are designed with a heat treated T bolt and self locking nut.Sold in a quantity of 2. ...

Chrome front clamp pipe with angle.Clamp has an inner diameter of 1-3/4". Fits:XL 1958-1978Additional Information OEM No.65514-58

V-Twin - 31-1966 - Linkert Carburetor Mount Bracket Zinc PlatedDescriptionLinkert carburetor mount bracket features a zinc plated finish. Fits:XL 1957-1972Additional Information

XL finned header clamp set is investment cast aluminum with a vibration finish on a shot peen natural surface.*NOTE: Tighten set with 5/16" allen screws that are provided, the front and rear are the...

Stainless steel XL muffler clamp features an inner diameter of 1-7/8" and a reinforced clamp pad area. Clamp features reinforcing pad spot that is welded in place for extra clamping power!*NOTE:...

Black 2 bolt license plate bracket for fender mounting. Fits:FX 1971-1972GL 1955-1972XL 1955-1972Additional Information UOM1 - EA<

XLCH exhaust mount kit includes clamps and frame support tube and accepts mufflers.Kit includes a chrome front pipe clamp, a stainless steel exhaust header clamp set, a chrome 1-7/8" heavy muffler...

XL motor mount plate set is constructed of raw steel. Set includes right and left plate set used to incorporate mount ports to accept late model forward controls. Fits:XL 1957-1981Additional...

2 piece front lower motor mount plates features a black finish.Sold in a quantity of 2. Fits:XL 1952-1981Additional Information UOM1 - SET

Regulator rectifier mount is for a 12 volt Bosch generator and has a chrome finish. Fits:XL 1958-1978FL 1958-1969Additional Information UOM1 - E

Chrome seat spring support bar Fits:XL 1957-1978Additional Information UOM1 - EA Measurements

Zinc plated carburetor support bracket mounts to air cleaner backing plate.Mounts to mount stud at tappet base. Fits:XL 1957-1985Additional Information OEM

Zinc carburetor cable bracket Fits:XL 1966-1971Additional Information OEM No.27449-66 UOM1 - EA<